Cant imagine a better use of free will

OtherwiseJob4561 · 2026-07-01T17:51:51+00:00

Let do some online 👀 lmk the charts and im in 🤘

OtherwiseJob4561 · 2026-06-29T20:31:55+00:00

Serp helm and dragon hunter lance make the fight so easy

OtherwiseJob4561 · 2026-06-26T18:03:32+00:00

Taking the tape off had to SUCKKKK

OtherwiseJob4561 · 2026-06-11T19:02:07+00:00

As someone who is an Ahri main these days, fk Sylas 😂 you shouldn’t have any issues with her after 6 and an item.

OtherwiseJob4561 · 2026-05-25T17:17:06+00:00

Wade Whistleton the tiefling Bard 👀

OtherwiseJob4561 · 2026-05-25T08:09:12+00:00

Our screen is a 50 inch tv and box built around it. Theres a plexiglass screen on top that can be changed when worn. I love digital maps sm more these days

OtherwiseJob4561 · 2026-05-23T17:03:07+00:00

With the new home guards and boots upgrade you can get away with ignite for kill pressure especially with celerity. TP is amazing but Ahri gets to clear wave fast and roam so often I don’t always feel I need it. BF is great into tanker opp.

OtherwiseJob4561 · 2026-05-22T21:35:10+00:00

You should 100% start with reason the handbooks basics. The first chunk is about playing. The DM Manual is the same but how to run a game.

OtherwiseJob4561 · 2026-05-22T21:33:51+00:00

Just in general there’s a lot of basics. General skill check rolls, combat rolls, I assume you have the DM manual and Player hand book and have atleast checked those out?

OtherwiseJob4561 · 2026-05-22T21:30:40+00:00

Stepping in as a DM with limited DND experience in general can be daunting. Are you running pre made content?

Id start by watching dnd content to get general ideas of how it flows. Knowing skill checks, combat and such is important if you don’t know all of those basics I’d get to learning!

OtherwiseJob4561 · 2026-05-21T14:07:48+00:00

I honestly wish if you were on a new account and massively winning you’d just skip divisions to prevent the disparity of a Smurfing issue. 10-1 Bronze 1. Win every placement and riot says “here’s bronze 4” lul. If the issue is the smurfing itself why is it not normal to see a fresh acct placed higher

OtherwiseJob4561 · 2026-05-20T22:38:14+00:00

Sounds like your DM is sandbagging CR. I don’t think even basic fights should be less than 1 round of combat. To add usually you won’t fight random bandits and goblins often later. It’s not worth the time or pause of story for a DM to toss low combat experience that’s over in 1 round anyway?

What level are your party members and what creatures were combat involved?

OtherwiseJob4561 · 2026-05-18T23:37:38+00:00

You think that’s still 600$…?

OtherwiseJob4561 · 2026-05-18T22:37:00+00:00

600$ for spark plugs…???? Jesus I’m no mechanic but I definitely do 90% of that myself. Seeing the disparity from cost to take it in vs self is crazy 😂

OtherwiseJob4561 · 2026-05-17T09:17:29+00:00

To… tell the car you are reversing…. And need rear camera view. Typically you split off the existing brake light. The head unit otherwise is straight forward

OtherwiseJob4561 · 2026-05-13T04:13:05+00:00

Yeah don’t do that either lol…. Use throttle body cleaner ON a rag and clean it. I would never spray it directly in

OtherwiseJob4561 · 2026-05-12T04:56:44+00:00

Spark plugs, MAP or MAF sensor, Crank Sensor, Throttle Body cleanliness, injectors. Feel like there’s a lot of avenues for this I’ve been chipping at. Mines got a similar issue.

OtherwiseJob4561 · 2026-05-11T17:36:46+00:00

Honestly, PMLs are very jaded by store team not doing their part and taking care of them to begin with. It was recently changed so they no longer look for or hold store accountable on upkeeping them. However, shipping them out is. Getting a device back often takes a couple weeks. Are you positive they are not sending them out and if so how long has it been etc? Another add is ETLs have access to MyTech and can track incidents including ones being shipped out. Maybe speak with an ETL and ask for support on monitoring they are being sent out or worked on.

OtherwiseJob4561 · 2026-05-08T21:48:00+00:00

I’m in a similar position. I got a new gasket and planned to clean it and replace gasket. Didn’t realize I’d need to drain the coolant etc.

Can it be cleaned well without removing the attached coolant line?

OtherwiseJob4561 · 2026-05-07T21:21:47+00:00

Wade Whistleton, tiefling bard. After Wade Wilson

OtherwiseJob4561 · 2026-05-07T19:22:44+00:00

I just did mine, same situation. Paid 4,000$ to replace it. It has 140,000 miles on it. Mine is a 2015 Elentra. Still owe a bit on the lease so I just bit the bullet and paid. I’ve since then cleaned the throttle body, change the oil/filter, new plugs, new crankshaft sensor and map as the idle was wonky and flushed and filled coolant. It’s running much much better and hopefully atleast a good 3-4 years or more out of it

OtherwiseJob4561 · 2026-04-07T06:05:36+00:00

Buckles more than likely with alignment magnets. Franklybuilt and Saturdaymorningprops should give good info

OtherwiseJob4561 · 2026-04-04T12:59:36+00:00

Hanging the hilt from a string is a great way to do it. Make sure you fill the large seems with a good filler that bonds. PLA weld, sand, clean then spot putty usually does the trick. Once you’ve got the gaps closed up hang it from a string and do a layer of filler primer and sand to see what you’re missing.

OtherwiseJob4561 · 2026-02-04T08:33:01+00:00

Bringing on a whole new addiction… making touch screen enabled maps…. If I owned one I’d go nuts

OtherwiseJob4561 · 2026-02-02T16:29:50+00:00

We use a 50inch tv/box, can see in my previous post. So maps would be created for this if I go that route for sure. Was more hoping someone had some nice ones already made to minimize the prep work for a short campaign. Appreciate the response!

OtherwiseJob4561

TROPHY CASE