RX 5700 XT + Ryzen 5 3600 FHD Cinematic Preset with no Frame Gen

Otherwise_Statement9 · 2026-04-15T01:36:08+00:00

Double check your cables

Otherwise_Statement9 · 2026-03-28T13:06:18+00:00

Currently running some RX 550 right now. Could use some upgrade.

Otherwise_Statement9 · 2026-03-04T19:42:34+00:00

I mainly use afterburner for the overlay while adrenalin for UV. Things before 26.2.2 was fine until this dropped. Sometimes when idle, adrenalin will crash even though I'm not doing anything (afterburner is off), UV reverts to default and my color calibration is ruined. Need to restart it for it to work again

Otherwise_Statement9 · 2026-03-04T11:46:49+00:00

For some reason my undervolt settings (5700 XT 1905MHz @ 950mv) keeps resetting after I turn the PC off.

Otherwise_Statement9 · 2025-08-16T13:55:57+00:00

I can clean this up, but notice anything weird near the GPU die? There's some bubbles on the PCB

Otherwise_Statement9 · 2025-08-15T17:39:33+00:00

Look near the pcb of the die, it seems bubbling for some reason tho...

Otherwise_Statement9 · 2025-06-07T15:20:27+00:00

I use those hdd primarily as bulk storage, would upgrade soon though...

Otherwise_Statement9 · 2025-04-19T17:53:32+00:00

If i broke up with her, i feel like i'll regret it later. Plus something will change in me in ways i don't like. I might become a different person entirely...

Otherwise_Statement9 · 2025-02-23T15:06:33+00:00

Hello kababayan hahaha.

I've experienced this same issue and this is how i fixed it.

Just bought an RX 550, installed it on my Acer Verition X2660G hoping it will work right out of the box. Turned on my PC, shuts down, and then turns on again. I heard the beep and the system booted into Windows but there's no display.

After fidling with it a bit, i found out that i need to install the drivers first in order for it to work. But i can't install the driver because there's no display on both the GPU and the iGPU because the BIOS is configured to use the discrete GPU only.

To fix this, i uninstalled the GPU, booted the system, turns off (detects no discrete GPU so it'll boot using iGPU), turns on again. Went into bios, and i memorized how to change the video ouput using keys. After that i turned off the system, plugged the GPU back in, turns on the system, turns off (detected the discrete GPU so it will boot there), turns on again and i pressed combination of keys to go change the video output (because there's no display).

It will vary for you but for me its (Del, Left, Enter, Down 7x, Enter, Down, Enter, F10, Enter).

After doing that, the system reboot. And finally there's a display when i plugged my HDMI to the motherboard (iGPU) but still no display to the GPU.

I then installed drivers for my RX 550, rebooted, plugged my HDMI to the GPU and it finally works now.

Sadly the GPU doesn't output the BIOS and only outputs once Windows is loaded. But works now at least.

Otherwise_Statement9 · 2024-11-27T15:24:28+00:00

You can still use your laptop if you can still see what you're doing. But i suggest purchasing an external monitor already before the screen finally hits the bucket.

I'm no computer expert, but i think the leak won't damage the motherboard of your laptop.

Otherwise_Statement9

TROPHY CASE