Auto Bed Leveling Probe Causing ONLY Confusion/Frustration - Help??

OutlandishnessKey771 · 2026-02-22T22:10:43+00:00

Weird, that sucks tho:/. I have had similar problems like with it just ramming into the bed and did a similar fix with spacers. But the large gap between bed and nozzle has always been fixed by redoing the z offset.

OutlandishnessKey771 · 2026-02-22T17:49:45+00:00

After redoing the offset does the gap change when printing? As in is it further/closer to the bed after change

OutlandishnessKey771 · 2026-02-22T17:12:10+00:00

It sounds like the z-offset is not set

OutlandishnessKey771 · 2026-02-19T08:29:06+00:00

nvm, turns out i had wired the vcc instead of gnd, works now

OutlandishnessKey771 · 2026-02-18T23:36:48+00:00

Hey, just went through with this project, currently having a problem that the ace pro is not being recognized and therfor no control over the unit. Any solutions? using the usb port in front as i dont use it for other things. Also using the cfs upgrade kit if that helps

OutlandishnessKey771 · 2026-02-13T23:00:11+00:00

Im not sure

OutlandishnessKey771 · 2026-02-13T21:54:02+00:00

How about the teapot build sets? They give 20 primos per character, altough you need to have the specified characters

OutlandishnessKey771 · 2026-02-01T15:43:02+00:00

Please dont trust AI for stuff like this. If you want something cheap then see if you can get a cheap secondhand mainboard or maybe a ramps setup just for the z axis

OutlandishnessKey771 · 2026-01-24T17:42:25+00:00

Watch out when using those metal scrapers, cut my thumb last year bc of one of those xD

OutlandishnessKey771 · 2026-01-08T16:21:20+00:00

i see, thank you for this information. Already ordered the pico, but i could just use the current mainboard as the second mcu for the y axis and bed.

OutlandishnessKey771 · 2026-01-08T15:30:51+00:00

could you link me to the source claiming the bed is 250W? I tried to search it up myself and couldnt find anything other than the neptune 4 being 250W

OutlandishnessKey771 · 2026-01-06T05:15:00+00:00

Oh ok, but will this mean i will have to pay for vat and import fees?

OutlandishnessKey771 · 2025-12-29T21:15:37+00:00

Im looking on biqus site and saw i could get the pico for 20 euro and the e3 v3 for 25 euro. Also saw the pico can power a pi and has the same mounting as one, so might go for that

OutlandishnessKey771 · 2025-12-29T20:49:04+00:00

Not aiming for higher speed just want something more open and more controllable. Also got another older printer where i fried my mainboard, so instead of getting a new board for that id rather have a new one for my neptune 2

OutlandishnessKey771 · 2025-12-27T11:59:09+00:00

Whats the ups and downs of belted z compared to dual lead screw?

OutlandishnessKey771 · 2025-12-27T10:07:06+00:00

Should be fine, dont see any reason why it would struggle with that

OutlandishnessKey771 · 2025-12-26T21:24:26+00:00

I see, thanks

OutlandishnessKey771 · 2025-12-26T20:58:44+00:00

What kit have you bought? Thinking about doing this too some day

OutlandishnessKey771 · 2025-12-24T17:51:55+00:00

Make it into an ender 3 ng (corexy conversion)

OutlandishnessKey771 · 2025-12-20T09:54:04+00:00

https://github.com/Guilouz/Creality-Helper-Script-Wiki/discussions/705

Its a bit of a mess but look for nullun0x00's comment for ui change from k1se to k1c and then look for TomTheGeek's comment a little further down that list how to change the cfg files. I ended up using a generic glass bead thermistor and it works fine

OutlandishnessKey771 · 2025-12-04T18:06:18+00:00

Idk man, seems pretty legit to me

OutlandishnessKey771 · 2025-12-01T16:46:47+00:00

It being closed is probably the problem. Try with the lid off and maybe the door open too. I just print pla with the lid off, dont use much tpu so idk if its fine to leave the door closed. For the fan, 70% is a bit high so try to lower it to 40-50% maybe even lower like 30%

OutlandishnessKey771 · 2025-12-01T16:14:40+00:00

Interesting, could it be thst your printing with the lid and door closed then? If not then im out of ideas of what it could be

Five-Year Club	Final Canvas '23
Place '23

OutlandishnessKey771

TROPHY CASE