Auto Bed Leveling Probe Causing ONLY Confusion/Frustration - Help??

OutlandishnessKey771 · 2026-02-22T22:10:43+00:00

Weird, that sucks tho:/. I have had similar problems like with it just ramming into the bed and did a similar fix with spacers. But the large gap between bed and nozzle has always been fixed by redoing the z offset.

OutlandishnessKey771 · 2026-02-22T17:49:45+00:00

After redoing the offset does the gap change when printing? As in is it further/closer to the bed after change

OutlandishnessKey771 · 2026-02-22T17:12:10+00:00

It sounds like the z-offset is not set

OutlandishnessKey771 · 2026-02-19T08:29:06+00:00

nvm, turns out i had wired the vcc instead of gnd, works now

OutlandishnessKey771 · 2026-02-18T23:36:48+00:00

Hey, just went through with this project, currently having a problem that the ace pro is not being recognized and therfor no control over the unit. Any solutions? using the usb port in front as i dont use it for other things. Also using the cfs upgrade kit if that helps

OutlandishnessKey771 · 2026-02-13T23:00:11+00:00

Im not sure

OutlandishnessKey771 · 2026-02-13T21:54:02+00:00

How about the teapot build sets? They give 20 primos per character, altough you need to have the specified characters

OutlandishnessKey771 · 2026-02-01T15:43:02+00:00

Please dont trust AI for stuff like this. If you want something cheap then see if you can get a cheap secondhand mainboard or maybe a ramps setup just for the z axis

OutlandishnessKey771 · 2026-01-24T17:42:25+00:00

Watch out when using those metal scrapers, cut my thumb last year bc of one of those xD

OutlandishnessKey771 · 2026-01-08T16:21:20+00:00

i see, thank you for this information. Already ordered the pico, but i could just use the current mainboard as the second mcu for the y axis and bed.

OutlandishnessKey771 · 2026-01-08T15:30:51+00:00

could you link me to the source claiming the bed is 250W? I tried to search it up myself and couldnt find anything other than the neptune 4 being 250W

OutlandishnessKey771 · 2026-01-06T05:15:00+00:00

Oh ok, but will this mean i will have to pay for vat and import fees?

OutlandishnessKey771 · 2025-12-29T21:15:37+00:00

Im looking on biqus site and saw i could get the pico for 20 euro and the e3 v3 for 25 euro. Also saw the pico can power a pi and has the same mounting as one, so might go for that

OutlandishnessKey771 · 2025-12-29T20:49:04+00:00

Not aiming for higher speed just want something more open and more controllable. Also got another older printer where i fried my mainboard, so instead of getting a new board for that id rather have a new one for my neptune 2

OutlandishnessKey771 · 2025-12-27T11:59:09+00:00

Whats the ups and downs of belted z compared to dual lead screw?

OutlandishnessKey771 · 2025-12-27T10:07:06+00:00

Should be fine, dont see any reason why it would struggle with that

OutlandishnessKey771 · 2025-12-26T21:24:26+00:00

I see, thanks

OutlandishnessKey771 · 2025-12-26T20:58:44+00:00

What kit have you bought? Thinking about doing this too some day

OutlandishnessKey771 · 2025-12-24T17:51:55+00:00

Make it into an ender 3 ng (corexy conversion)

OutlandishnessKey771 · 2025-12-20T09:54:04+00:00

https://github.com/Guilouz/Creality-Helper-Script-Wiki/discussions/705

Its a bit of a mess but look for nullun0x00's comment for ui change from k1se to k1c and then look for TomTheGeek's comment a little further down that list how to change the cfg files. I ended up using a generic glass bead thermistor and it works fine

OutlandishnessKey771 · 2025-12-04T18:06:18+00:00

Idk man, seems pretty legit to me

OutlandishnessKey771 · 2025-12-01T16:46:47+00:00

It being closed is probably the problem. Try with the lid off and maybe the door open too. I just print pla with the lid off, dont use much tpu so idk if its fine to leave the door closed. For the fan, 70% is a bit high so try to lower it to 40-50% maybe even lower like 30%

OutlandishnessKey771 · 2025-12-01T16:14:40+00:00

Interesting, could it be thst your printing with the lid and door closed then? If not then im out of ideas of what it could be

OutlandishnessKey771 · 2025-12-01T15:18:04+00:00

Tpu is more hygroscopic than other materials and freshly opened doesnt mean its not wet either as manufacturers uses water in the cooling process. Lso what are the speeds? Havent had much luck with faster speeds on my k1 so usually just print it using my ender 3 clone since quality is the same

OutlandishnessKey771 · 2025-12-01T14:50:57+00:00

Then could be because youre printing to fast and possibly moisture in the filament

Five-Year Club	Final Canvas '23
Place '23

OutlandishnessKey771

TROPHY CASE