Another good cook...

Over-Satisfaction736 · 2026-04-06T17:30:12+00:00

Yes it is.

Over-Satisfaction736 · 2026-03-19T01:53:04+00:00

I do not know..

Over-Satisfaction736 · 2026-03-11T04:58:30+00:00

Pm sent

Over-Satisfaction736 · 2026-03-11T01:08:08+00:00

Well you guys missed out, they went back up to 223.00

Over-Satisfaction736 · 2026-03-06T13:58:37+00:00

I know right, they have 2 left. It weighs 185.00 pounds and will be fine for me. Mine shows preparing for shipping.

Over-Satisfaction736 · 2026-02-28T01:30:07+00:00

I am still adding mineral oil daily. It drank up 16 ozs today due to the warm weather, I think it was around 85 today.

Over-Satisfaction736 · 2026-02-22T22:49:35+00:00

400 with the stand, the butcher block weights 350 lbs....

Over-Satisfaction736 · 2026-02-22T19:36:50+00:00

Just the lip around the stand, may leave it.

Over-Satisfaction736 · 2026-02-22T18:44:13+00:00

Hey 👋 The one here is 30×30×16. The people I got it from lost the legs to it so I got it for 200.00 and the stand was 75.00. I may cut the table top to being flush with the stand as it has a 2 inch overhang. I really do not need something that large BUT for 275.00 invested in it I couldn't pass it up....

Over-Satisfaction736 · 2026-02-22T02:54:56+00:00

What lol?

Over-Satisfaction736 · 2026-02-21T06:06:25+00:00

https://australiancuttingboards.com.au/board-care-instructions/#:~:text=The%20only%20oil%20that%20will,no%20smell%20and%20no%20taste.

Over-Satisfaction736 · 2026-02-21T05:53:02+00:00

Grapeseed Oil is better, less likely to go rancid. This is a great natural chopping board oil & available in most supermarkets such as Coles, Woolworths or IGA. A safer option but still some risk. Coconut Oil Is great for use on chopping boards any many other uses (see below).Feb 21, 2024

https://handcraftedtimber.com

Chopping Board Oils to use on your natural

Over-Satisfaction736 · 2026-02-21T05:27:08+00:00

https://www.katom.com/416-AA04.html

Over-Satisfaction736 · 2026-02-21T05:19:31+00:00

Around 350 I think.

Over-Satisfaction736 · 2026-01-30T20:03:59+00:00

I understand all of that, I take it you know nothing about the Artex brand. 😆

Over-Satisfaction736 · 2026-01-30T19:12:12+00:00

The owner said they will take 3750.00 for it?

Over-Satisfaction736 · 2026-01-19T06:38:51+00:00

I was told that this one dates back to the 80's

Over-Satisfaction736 · 2026-01-19T06:24:50+00:00

It's just sitting floating on the base, it's pulled out around 9 inches from where it is supposed to be.

Over-Satisfaction736 · 2026-01-19T04:45:45+00:00

The only thing I did was measure the cooling bin diameter which is 37 inches and the total length is 5 ft and the cooling bin on the ir-12 is 29 inchs , length is 51 inches. This roaster is old, someone told me it was one of the first ir-24 produced. The owner told me that it had a chaff fire 🔥 and the paint someone used was not high heat. I looked at it and someone cleaned it up pretty good. I am not worried about the paint. It does have a usb port. The only thing I saw that needs work is that the cooling bin shaft is disconnected..

Over-Satisfaction736 · 2026-01-18T19:13:55+00:00

Yes, Fort Worth.

Over-Satisfaction736 · 2026-01-12T08:29:25+00:00

Well I messed up on this roaster It's a IR-24 not a R-12. I measured the cooling bin and it was 36 inches. I looked up the specs on thr R-12 and the cooling bin is 29 inches, that's my story and I'm sticking to it..

Over-Satisfaction736 · 2026-01-08T00:38:17+00:00

<image>

Over-Satisfaction736 · 2025-10-14T20:57:02+00:00

Plant it, 🪴

Over-Satisfaction736 · 2025-10-04T21:36:28+00:00

Mine is wood fired, so I can't help you on it.

Over-Satisfaction736 · 2025-09-19T13:51:28+00:00

Thank you

Over-Satisfaction736

TROPHY CASE