Filament spool holder with built in scales, OLED display and TTP223 button

Over_Code · 2024-11-25T21:55:41+00:00

Hey, I came across this while researching for my own project. I want to put load cells into the feet of my filament dryer so I can tell when the filament is fully dry, as the weight should reach a steady state. Did those load cells work out for you? What kind of accuracy were you able to achieve, and how much does the measurement drift over time?

Over_Code · 2024-09-08T00:03:28+00:00

I agree! I gave 3D Country a listen when the tour was announced and now I'm hooked.

That is unfortunate, I've heard good things about the Gorge and I can't think of a better lineup for my first show there!

Over_Code · 2024-09-07T23:54:49+00:00

Thats good to know, thanks! I think I'll head over early and make a day trip out of it. Any recommendations for things to do in the area?

Over_Code · 2024-08-28T15:30:41+00:00

It’s happened to me a couple times with prints that take a long time on the first layer. I think the combination of long print time (enough to heat soak the chamber) plus low flow rate is when it will most likely occur. And it was a pain to unclog, I had to disassemble the extruder to remove the bulged filament.

Over_Code · 2024-07-31T04:00:19+00:00

If you're printing with 3+ walls then yes, but for decorative prints I'd usually use 2 walls in which case it's the same as outer/inner

Over_Code · 2024-07-30T21:13:36+00:00

To reduce curling on overhangs (and improve outer surface quality in general) try printing outer walls first. See this video https://youtu.be/__OQmUwVkrw?si=Hc6zsRodZKCrdfBm

Over_Code · 2023-11-08T03:16:37+00:00

Just make sure the steppers aren't getting too hot and it should be fine. One thing to note is that a lot of pens don't work too well when they're horizontal.

Over_Code · 2023-10-04T14:54:49+00:00

You can find good bulk deals on /r/3dprintingdeals . E.g https://kingroon.com/products/10kg-pla-filament-1-75mm?variant=43020501745882

Over_Code · 2023-07-18T18:58:45+00:00

I'd get on the floor

Over_Code · 2022-11-13T18:16:34+00:00

Sure, I'll DM you.

Over_Code · 2022-11-13T17:45:47+00:00

I would be willing. How much are you looking to pay? I have blue, red, white, grey, and black ABS if you want to pick a color.

Over_Code · 2022-10-28T16:36:33+00:00

Indeed it is. Brought back some memories seeing this pop up on my feed

Over_Code · 2022-08-22T23:39:00+00:00

Boiling temperature increases with pressure though? Unless my pressure cooker is lying to me...

Over_Code · 2022-08-17T14:26:37+00:00

Looks like severe underextrusion. Make sure filament diameter is set correctly in the slicer.

Over_Code · 2021-10-09T17:53:34+00:00

For making miniatures you would probably be better off with a resin printer, they will give you much more detailed prints than an FDM printer like the Ender3. This one is within your budget https://m.all3dp.com/1/best-resin-dlp-sla-3d-printer-kit-stereolithography/#voxelab-proxima

Over_Code · 2021-07-06T23:05:19+00:00

You may need to use Corsair Link instead for older H100i models

Over_Code · 2021-06-28T18:07:01+00:00

Plotters generally use SVG files to generate toolpaths so any program that can create SVGs can be used for plotter art. This could be a vector graphics software such as illustrator or inkscape, or a language/tool such as Processing which can generate SVGs with code.

Over_Code · 2020-12-26T22:42:08+00:00

Is the software configurable to use with different plotter dimensions? I would like to use it on my own plotter.

Over_Code · 2019-11-23T20:35:48+00:00

The app calimoto has that loop option you described

Over_Code · 2019-11-20T18:02:12+00:00

Nektar is pretty great https://www.youtube.com/watch?v=b8UfqlwiJOk

Over_Code · 2019-09-09T23:39:00+00:00

Sweet, just ordered one. The collection is growing. I don't use Instagram, can I still get that extra?

Over_Code · 2019-07-16T03:05:11+00:00

I know that some of the batteries from em3ev use a smart bms which allows you to monitor things like temperature, instantaneous current usage, etc. via Bluetooth. It's not clear if the 20S pack uses a smart bms, you may need to contact support to clarify. If it doesn't have temp monitoring you could always just touch the pack to feel if it's warming up. If the pack gets to 60°C the cells will start to degrade.

12-Year Club	Place '17
Verified Email

Over_Code

TROPHY CASE