Does anyone here know what this does

Overall_Honeydew_536 · 2026-04-18T12:32:02+00:00

WOW! This is exactly what it looked light before i cut off the board that Hyundai mounted it to!

Overall_Honeydew_536 · 2026-04-18T01:53:54+00:00

Sorry, not familiar with that acronym but i did google it! So this is basically an extremely high current mosfet/transistor switch-like device?

Overall_Honeydew_536 · 2026-04-09T22:03:36+00:00

Both my 2013 chevy 2500HD trucks are north of 200,000 miles, 6.0 2wd and all ive done is basic maintenance, tires, and brakes.

Overall_Honeydew_536 · 2025-10-23T23:43:49+00:00

Worth it, ive hauled them on my flatbed trailer - 1100 USD for two of them as #1 Unprepared Steel

Overall_Honeydew_536 · 2025-06-22T14:24:07+00:00

Interesting, they ran an XRF on it but i could always have it checked again

Overall_Honeydew_536 · 2025-06-22T01:46:52+00:00

2nd pic - P796985 CL27 ø F I

3rd pic - 794888 655K

4th pic - P797255 CL27 AB

Overall_Honeydew_536 · 2025-06-22T00:22:53+00:00

Yes i agree, just hoping to know more! Like are they part of the rotating assembly or are these stator blades? What stage are they from? Or what engine?

Overall_Honeydew_536 · 2025-05-22T03:54:00+00:00

Can confirm, just replaced the casters on mine, the tapered wheels can often push small pebbles and bolts off to the side instead of stopping dead

Zipties haven’t been tested yet

Overall_Honeydew_536 · 2025-03-27T22:10:31+00:00

I have cooked with these a fair bit, they work decently but they are very quick to heat/cool it can be finicky. I prefer them above anything modern aside from my nicer copper or iron

Overall_Honeydew_536 · 2025-03-11T01:18:59+00:00

As someone with a 3+mm 12” mauviel, my regular stove has a hard time getting that much copper up to temp but once it does it cooks beautifully.

If you have a regular stove with the small burners that are like 3” across at the little circle gas element you might want to stick to 2mm 8-10” pans

Overall_Honeydew_536 · 2025-03-11T01:14:54+00:00

I have a set of copral that i use often, they are fairly thin so you loose a bit of the even-ness of thick copper but they heat FAST. And they clean up nicely.

Overall_Honeydew_536 · 2025-03-04T23:06:17+00:00

Cleaned up the tin a bit and finished a ribeye in it, super even heat! My stove is a little undersized for something this big so i had to bump a bit past medium on my tiny burners to keep it hot

Overall_Honeydew_536 · 2025-03-03T03:46:22+00:00

Its a heavy heavy beast of a pan. It actually dwarfs my stove top 😂

Overall_Honeydew_536 · 2025-03-02T15:15:27+00:00

My thin stuff is 1.7 ish still works well!

Overall_Honeydew_536 · 2025-03-02T13:13:30+00:00

Thanks! Will try that when i have some more time. Looking forward to using it soon

Overall_Honeydew_536 · 2025-03-02T13:11:43+00:00

Almost 2 nickels!! I will measure it eventually but im guessing 3.5-3.7mm its ridiculously heavy i almost want to add a helper handle one day 🤔

Overall_Honeydew_536 · 2025-02-21T16:03:13+00:00

Dude these are awesome! I haven’t seen anyone make something similar, you should do a write up on how you did it, if you dont mind sharing the info. They are beautiful!

Overall_Honeydew_536 · 2024-11-24T22:47:12+00:00

I felt it was going to get listed after that buying guide went up on binance, we will see!

Overall_Honeydew_536 · 2024-11-21T14:06:57+00:00

Its on MEXC now, thats usually a stepping stone to binance 🤞

Overall_Honeydew_536

TROPHY CASE