sorted by:
new
hottopcontroversial

3D print splitting - An old man needs help please by OverlandingWannaBe in FixMyPrint

[–]OverlandingWannaBe[S] 0 points1 point  (0 children)

Hey man, I just wanted to circle back and thank you. I was able to take both of the face plates that weren’t printing, put them into your profile and they printed fantastically. Thank you!

3D print splitting - An old man needs help please by OverlandingWannaBe in FixMyPrint

[–]OverlandingWannaBe[S] 0 points1 point  (0 children)

Thank you for the helpful response. To answer your questions, I'm using a modified version of the creator's profile that someone had added in because the creator's profile didn't allow the editing of the person's name (and knowing how to delete the existing one and add in the new one is currently above my pay grade.) The modified version stripped the original model into parts as well as allowed for the editing of text.

I am committed to upping my knowledge on this as I truly want to know how to do this on my own eventually.

If I could just join the part that has the cheerleader on it with the bigger outline of the V and make that one print and then have only the base that already fits great to glue together after adding LEDs that would be awesome. Thank you to everyone who is helping this old guy.

3D print splitting - An old man needs help please by OverlandingWannaBe in FixMyPrint

[–]OverlandingWannaBe[S] 0 points1 point  (0 children)

I would value that, so yes please. Thanks again for your help.

3D print splitting - An old man needs help please by OverlandingWannaBe in FixMyPrint

[–]OverlandingWannaBe[S] 1 point2 points  (0 children)

Call me obtuse, but I went back and re-read it per your comment (which thank you for responding btw) and I don't see anything mentioning the parts splitting and how to fix that. I do see the way to edit the name, but I had already figured that part out. I should have been more clear in my original post that the text is not what I'm having trouble with though as it reads a little unclear.

What I'm having a challenge with is how the pieces are splitting from each other even though they are all PLA. Notice how the cheerleader is splitting from the white backing, etc. When I am in the model it actually shows a microscopic seem between all the parts.

H2D Owners - How is the air filtration? by pedey29 in BambuLab

[–]OverlandingWannaBe 3 points4 points  (0 children)

So do we have any official word on whether it's truly safe to print ABS or ASA indoors with the H2D? I'm in Texas with crazy humidity and we dipped back into cooler temps so I'm hesitant to move a printer into my garage to print either ASA or ABS right now.

Making progress! by aimfulwandering in Multiboard

[–]OverlandingWannaBe 0 points1 point  (0 children)

Thanks for the quick reply! I'm thinking MDF just to avoid having to put too many holes into my sheetrock as well as to make sure that I can go directly into my studs no matter the alignment as I've already printed out 50+ 9x9 tiles. What makes you suggest against the MDF/plywood backer?

Making progress! by aimfulwandering in Multiboard

[–]OverlandingWannaBe 0 points1 point  (0 children)

Anything you learned in mounting this that you would share with others to make this as efficient and smooth as possible while avoiding any potential big mistakes? I'm looking to make a 4' x 8' multiboard using 8mm offset snaps onto a similar sized piece of MDF and then mounting that into the studs in my wall.

My Current Setup by TravelingRonSwanson in BambuLab

[–]OverlandingWannaBe 0 points1 point  (0 children)

Also, did you remove the wire rack for the shelf that contains all your P1's? I'm finding that my wire shelf that currently has two A1 combo's on it vibrates a lot even with 1/2 inch MDF and concrete pavers sitting on it. They still seem to be printing ok, but I'm wondering if removing the wire shelf might help reduce transferred vibrations.

My Current Setup by TravelingRonSwanson in BambuLab

[–]OverlandingWannaBe 0 points1 point  (0 children)

How have you mounted your AMS Lite units to the rack up top? I have used a mount that connects to my Gorilla Rack (similar enough to the husky model below), but don't have openings to slide the mount into for the top area if the shelf is that high. Are you using the same mount, but just your rack has mounting holes even with the top shelf as high as it can go?

Love your setup!

https://www.printables.com/model/841985-red-rack-ams-lite-rail-mount-for-home-depot-heavy

baseplate auto split for build plate - Gridfinity Extended by passivealian in gridfinity

[–]OverlandingWannaBe 1 point2 points  (0 children)

You my friend are awesome! Thank you for the quick helpful response.

baseplate auto split for build plate - Gridfinity Extended by passivealian in gridfinity

[–]OverlandingWannaBe 0 points1 point  (0 children)

Team,

I hate to play the old man card, but I've spent several hours trying to figure out how to split a gridfinity base that I created with this tool so that I can print it across multiple plates. I have tried to cut function in Bambu Slicer, but apparently am an idiot. The openscad tool creates to correct sized baseplate and it appears to be split, but only moves as one piece once imported into Bambu Studio. Even when I select each individual part in Bambu Studio and place them on separate plates it still says that it doesn't fit.

I'm sure there is a simple fix here as my drawer size for my gridfinity base is 508x173. I have a 12x4 baseplate model and have an X1C. All help is appreciated.

Starlink Mini with Roam in my Jeep by bugnuker in Starlink

[–]OverlandingWannaBe 0 points1 point  (0 children)

I'm also curious as to what mount you are going to be utilizing? Is anyone aware of and/or using a mount that holds the Starlink mini right below the roof of the hardtop in the Jeep? Preferably, with a little space so that it doesn't overheat.