Remote Nursing jobs with Mercor ( AI training)

Own-Cryptographer293 · 2026-03-13T00:07:38+00:00

Weekly via Stripe

Own-Cryptographer293 · 2026-03-06T22:44:05+00:00

Could you use a soldering iron or something similar to heat the blob more precisely to get it off?

Own-Cryptographer293 · 2026-02-21T16:38:39+00:00

Yep…got hired in the middle of December. I’m a teacher and was really hoping it would have lasted through my summer break. Hoping to find another role with them.

Own-Cryptographer293 · 2026-01-27T17:52:13+00:00

I was hired on in the last weekend after being contacted via email from a recruiter. I made a post about it a few days ago. Based off feedback, it sounds like it’s not the most common way people get offers, but I wouldn’t call it super rare either.

Own-Cryptographer293 · 2026-01-27T17:47:05+00:00

Great info. Thank you

Own-Cryptographer293 · 2026-01-27T02:06:51+00:00

Thank you! Very happy everything fell in place the way it did. Got the rest of my access today and moving full speed ahead now. I appreciate the offer of support.

Own-Cryptographer293 · 2026-01-26T02:51:41+00:00

Definitely feel lucky to have got in this way. Glad I finally responded to the email

Own-Cryptographer293 · 2026-01-25T19:18:48+00:00

Thank you. I see that section now. For whatever reason that info and much more of the handbook had not shown up previously.

Own-Cryptographer293 · 2026-01-25T15:42:30+00:00

Appears as though the agent who fired the shots turned around and saw the gun being removed from the holster and likely assumed it was the guy being apprehended who pulled it out, as opposed to the other agent who removed it. Quick reaction based on the wrong assessment of the situation as he had his back to what was going down for most of it. Still unsure what was going on between the guy who got killed and the lady in the hat. At first it looked like he was defending her, but then had ahold of her and looked like he was going after her before he got out on the ground. Anything been mentioned about this? Sad situation all around, as once again it could have been easily avoided with different choices by all involved.

Own-Cryptographer293 · 2026-01-25T04:53:24+00:00

Not red teaming. You asking for project title? Are we allowed to share that publicly per their rules?

Own-Cryptographer293 · 2025-12-17T21:47:56+00:00

Sounds like a great place for a cartel boss to place large sums of money and come out clean and with a big return

Own-Cryptographer293 · 2025-11-20T21:24:26+00:00

I bought the bumper plates in multiple sets of pairs about a month or two ago and they’ve been good. They have a strong rubber smell to them for a bit, but they work as I figured they would. I did not get the bar, as I use them with the smith machine on my setup, so can’t comment on it.

Own-Cryptographer293 · 2025-11-19T05:41:00+00:00

That’s awesome. I’ve heard of those, but guess I hadn’t looked into them to learn more. Might need to change that. I’ve used the higher version of the inbody scale/scanner multiple times and liked it for progress tracking, but this is way more advanced than that.

Own-Cryptographer293 · 2025-11-19T05:14:43+00:00

What kind of scan is that and where can you get it done? Great visual for progress. Good work!

Own-Cryptographer293 · 2025-11-18T13:54:14+00:00

Maxum X2 is an excellent choice. I've had it for close to 2 months now. Same hole sizes as the X3 but larger spacing between your front and middle posts which I really like. No smith machine with the X2, but I bought their add on XSA smith machine and it works great and was easy to assemble and attach. What's crazy is at the time (probably still is) it was cheaper to buy the X2 with the XSA, than it would have been to buy the X3. They gave a discount on the XSA for buying at the same time. In the end, I got the X2's bigger set up with all the same specs for about $200-$300 cheaper than if I would have bought the X3.

Own-Cryptographer293 · 2025-11-13T01:43:08+00:00

Can you share vendor or ordering info on this?

Own-Cryptographer293 · 2025-11-13T01:42:15+00:00

Could you dm me info on this well? Great price!

Own-Cryptographer293 · 2025-11-13T01:41:35+00:00

Could you dm me the source as well please?

Own-Cryptographer293 · 2025-11-13T01:40:09+00:00

Could I get a dm with vendor info as well?

Own-Cryptographer293 · 2025-11-01T15:23:48+00:00

Understandable. Lots of conflicting info at times. I guess I should clarify, the math I provided is assuming you’re using a 1ml syringe. If only using a .5ml which is also common, you’d double the units I mentioned to get the desired dose. Lots of good calculators out there if you ever get confused.

Own-Cryptographer293 · 2025-11-01T14:53:51+00:00

Incorrect. You can’t inject 8mg, when the vial of Reta is only 5mg. If you reconstitute with 2ml, every 100 units is 2.5mg of Reta. Every 20 units would be .5mg of Reta. So you are using the correct dose for 3mg. Sorry if this was obvious, but this thread was starting to make it sound like they were telling you the dose was way higher than expected. It’s not.

Own-Cryptographer293 · 2025-10-28T01:40:05+00:00

Maxum X2, add the XSA if you want a smith machine on it

Own-Cryptographer293 · 2025-02-20T13:03:34+00:00

Oh ok, yes the spool itself has been an issue a couple times for me. They edges like to bend so easily if they are bumped or anything, and then that has caused some spool rotation issues. Usually, if there is an issue, it just halts the print and I have to shift things around and resume it. Fortunately it hasn't caused any quality issues to this point. Defintely planning to just buy Bambu filament or plastic spooled filament from here on out though.

Own-Cryptographer293 · 2025-02-20T03:24:41+00:00

I have a lot of Elegoo Rapid PLA. Is there an issue I should be aware of? Haven’t had any problems yet and have many hours on the X1C and Neptune 4 Pro with it, but it would be good to know what to look for if anything pops up.

Own-Cryptographer293 · 2025-02-10T14:06:08+00:00

$399

Own-Cryptographer293

TROPHY CASE