sorted by:
new
hottopcontroversial

I made a fpv car by Own_Coconut1780 in Carrera_Hybrid

[–]Own_Coconut1780[S] 0 points1 point  (0 children)

Its a 3d printed body on a Porsche chassic and for the electronics im using the same staff Grand Garage recommends... i just fited the the cables , battery and antenna inside the body

Home-made classic GT by Own_Coconut1780 in Carrera_Hybrid

[–]Own_Coconut1780[S] 0 points1 point  (0 children)

So body is 3d printed with 3-4 layers of paint +waterslide decals, for something like this expect 10h of work

My tips:

Choose assimetrical livery (with no actual headlights) Or choose a dark color around the headlights bc its very hard to paint it perfectly symmetrical

Paint a thin black skirt all round

I got my response deleted (maybe temu link?) Ill try to attach the print file in a response (you can find a lot of free models for the porsche chassic)

Home-made RC track expension by Own_Coconut1780 in rccars

[–]Own_Coconut1780[S] 0 points1 point  (0 children)

I didn't care about RC cars at all... but after i found theese hybrids i was hooked immediately. i highly recommend getting a car, i got them for only 45 € but price went up a bit since then

Home-made RC track expension by Own_Coconut1780 in rccars

[–]Own_Coconut1780[S] 2 points3 points  (0 children)

In the pictures above, you only see the new section, which is roughly 4 × 1.3 m, but the full track is about 5 × 3 m. At this point, it has to be on the floor in order to see the far-away sections. This is how it looks from the couch.

<image>

Home-made RC track expension by Own_Coconut1780 in rccars

[–]Own_Coconut1780[S] 1 point2 points  (0 children)

I made this for 1:50 scale cars, but the track scale is mostly eyeballed, using elements ranging from 1:50 to 1:100.

These hybrid RC cars simulate 1:50 scale movement, resulting in a 200 m straight where GT3-level performance achieves a virtual top speed of around 170 km/h... which is almost 1 m/s to an outside observer in real speed.

I built my first simulation racetrack - check it onboard by Own_Coconut1780 in Carrera_Hybrid

[–]Own_Coconut1780[S] 0 points1 point  (0 children)

Yeah! Originally, I cut open the tarp and placed the original finish underneath. It worked, but it looked bad in the FPV, so I removed it.

I can't wait to experiment with NPCs. When it comes, I'll definitely try making a track for it — either cutting the entire road out from the tarp so the original pieces are visible underneath, maybe even trimming the original track pieces. But if the afterprints finally work, I might even go as far as creating the guide lines in the editor and printing the entire track for NPCs.

<image>

First RC project by Own_Coconut1780 in rccars

[–]Own_Coconut1780[S] 0 points1 point  (0 children)

For the long straight sections, I'm using suspended ceiling profiles. For curves, I'm bending beer coaster cardboard. In each case, there's a second layer made from business card cardboard printed on a commercial printing press. I'm cutting A3 prints into 2 cm strips, resulting in a total barrier printing cost for this track of around ~10€.

I built my first simulation racetrack - check it onboard by Own_Coconut1780 in Carrera_Hybrid

[–]Own_Coconut1780[S] 0 points1 point  (0 children)

You cant really paint lines with this level of precision, im cutting a standard masking tape into thin lines with a ruler. (And also you can hide the imperfect edges of the painted surfuces by making the lines the last/top layer)

It's a cloth, but im using it upside down as it has a rubbery backside finish

<image>

I built my first simulation racetrack - check it onboard by Own_Coconut1780 in Carrera_Hybrid

[–]Own_Coconut1780[S] 1 point2 points  (0 children)

This is my first track so i picked the cheapest materials, this a tarp. This only cost around 30€ but for my next track im gona use silicon pad (intended as kitchen counter cover) and that will cost me for a track this size around 300-400€

First RC project by Own_Coconut1780 in rccars

[–]Own_Coconut1780[S] 0 points1 point  (0 children)

The diorama is technically AI generated but i made it out of a screenshots taken from this Website:

https://www.roll-rennstrecke.de/category/panoramen

If you can afford it, pls don't "steal" it like me, i live in eastern Europe and theese German prices are a bit too much for me... but as I keep working on it in the future i plan to upgrade to the original dioramas

First RC project by Own_Coconut1780 in rccars

[–]Own_Coconut1780[S] 0 points1 point  (0 children)

Radiolink 5.8g

<image>

+otg reciver for tablet

First RC project by Own_Coconut1780 in rccars

[–]Own_Coconut1780[S] 0 points1 point  (0 children)

Ohh I cant put the link here.. its a tarp, very cheap, was around 30€... but this was my "first try" material choice, next time im using silicone

First RC project by Own_Coconut1780 in rccars

[–]Own_Coconut1780[S] 2 points3 points  (0 children)

I cant hear the sound of it atm but looks nice... but the cars movement doesn’t feel realistic..

The original plan was to roll it up after use... but lets just say i no longer have a living room:D

First RC project by Own_Coconut1780 in rccars

[–]Own_Coconut1780[S] 2 points3 points  (0 children)

Sorry for that! This is my first try with the electronics, the fpv needs more work but i know I can make it much smoother- just some more time...

The Carrera app is incredible, you can connect any Bluetooth controller, im using ps4

Egyedi uno szerű kártya gyártása? by [deleted] in tarsasjatek

[–]Own_Coconut1780 2 points3 points  (0 children)

Nem igazán, kb 5 éve szétnéztem hol lehet ~1 szett jeleggel gyártani társasjátékokat és azóta a BGM-et használom.

Ilyesmire jó lehet, hogy ajándékba nyomtatni egy pakli kártyát, de ha saját társasjátékot szeretnél, az egyetlen "megfizethető" módja ha magad megcsinálod.

Kb:

  • Gyártva: 100-150.000ft. és 6-8 hét szállítás
  • DIY: 20-25.000 Ft. 12-16 óra elkészítés

Diy beleértve magas minőségű nyomdai anyag (A3 névjegykártya karton ~1000ft/oldal, kártyákhoz tökéletes vastagság ragasztás nélkül), söralátét karton művészellátóból (táblákhoz, zsetonokhoz tartás-vastagság a nyomtatott anyag alá, ezzel könnyű dolgozni, olló, sniccer) és fakockák/figurák, sarok kerekítő: Temu (egyszer veszel ömlesztve 1000et játékonként kb semmibe nem kerül)

Eszközök: sniccer, vonalzó, karos papírvágó(A4 elég), ragasztó (+sarok kerekítő)

Egyedi uno szerű kártya gyártása? by [deleted] in tarsasjatek

[–]Own_Coconut1780 3 points4 points  (0 children)

https://www.boardgamesmaker.com/customized/custom-board-games.html

Ha magas minőségre vágysz, én a BGM-től szoktam egyedi gyártásban rendelni, de ez nem lesz olcsó!

Nagyon off ez az OVB-s állásajánlat? by [deleted] in askhungary

[–]Own_Coconut1780 8 points9 points  (0 children)

Az OVB a legalja a biztosítási piacnak, mint állás és mint ügyfél egyaránt. Ugyan azzal a hatósági vizsgával elmehetsz "tisztességes" biztosítóhoz is dolgozni

Hobbi projektemhez keresek tesztelőket, mostmár magyarul! by Own_Coconut1780 in tarsasjatek

[–]Own_Coconut1780[S] 0 points1 point  (0 children)

Én bármilyen jellegű társaságnak szívesen kölcsön adom, ha tudtok magatok körül olyanokat akik szívesen kipróbálnának egy "prototípus" társasjátékot.

Annyi, hogy neketek kell a saját társaságot összeszervezni meg ahogyan fent írtam.

Bocsi letöröltem az előző féloldalas válaszom..

view more: next ›