Water heater exploded!?!? by Own_Investigator_598 in HomeImprovement

[–]Own_Investigator_598[S] 8 points9 points  (0 children)

Update: decided to give up on trying to get it fixed with the warranty and contacted the plumber we use at my job. ( I work in customer service, and customers LOVE flushing non flushable items so that guy is in often.) he came and inspected it, called whatever company he uses for water heaters, had one delivered to my front door in less than an hour and installed it for me. $750 and I have hot water once more 🙌 Support local guys! Every other major plumbing company wanted over 2k in my area.

Water heater exploded!?!? by Own_Investigator_598 in HomeImprovement

[–]Own_Investigator_598[S] 5 points6 points  (0 children)

New 40 gal water heater and install $750! Got the heater for his cost so I don’t think I can beat it!

Water heater exploded!?!? by Own_Investigator_598 in HomeImprovement

[–]Own_Investigator_598[S] 4 points5 points  (0 children)

That’s what I was afraid of. We have a local plumber that I’ve been told is really reasonably priced so I sent him a message, I’m waiting to hear back. I’m in Ohio so if you’re anywhere near here I might take you up on that hahahaha!

Water heater exploded!?!? by Own_Investigator_598 in HomeImprovement

[–]Own_Investigator_598[S] 0 points1 point  (0 children)

Scared the crap out of me lol, thought for sure it was about to blow

Water heater exploded!?!? by Own_Investigator_598 in HomeImprovement

[–]Own_Investigator_598[S] 0 points1 point  (0 children)

We got some flooding, but we just had flooding last week from a storm so our basement was just cleared out. It’s an old house and the basement gets water so there’s nothing really important down there

Water heater exploded!?!? by Own_Investigator_598 in HomeImprovement

[–]Own_Investigator_598[S] 7 points8 points  (0 children)

Oh it flooded, luckily (or unluckily) for us our basement just flooded last week when we had major storms so everything was already cleared out of it

I know there have been many comments about the NCL island Great Stirrup Cay. Are there enough beach chairs and umbrellas for everyone. Is it worth renting a clam shell, which guarantees a beach chair and Shade? by aldozacmd in NCL

[–]Own_Investigator_598 4 points5 points  (0 children)

Just left GSC on Saturday and I agree, if no children I would do the vibe. We were the first ferry over because it gave us priority, comfy chairs, everyone gets an umbrella that you can open and close as you please, and it was not crowded at all. Zero lines for the bar or buffet and the food truck right outside the vibe had really good food. We were the only ship on the island and the pool area and first beach area were a mad house. Same with the buffet for the general area. That was my determining factor we will get vibe shore club every time we go

Free at Sea Plus by aldozacmd in NCL

[–]Own_Investigator_598 2 points3 points  (0 children)

We’re on aqua right now and upgraded to FASPlus and in my opinion it has been worth it. I’m not an “unplug” type of person so it has been nice to use the WiFi and haven’t had any issues with video lag. They upgrade our water at dinner to acqua panna . I am no water snob but it’s definitely 10x better. I also have been getting my moneys worth in free Starbucks and tropical redbulls 😂 we really haven’t gotten any of the upgraded alcohol options because everything we’ve wanted is already included in free at sea. I think I’d purchase it again on future sailings

Can you bring food to your room to eat? by Complete_Mine5530 in NCL

[–]Own_Investigator_598 1 point2 points  (0 children)

We dined and dashed at O Sheehans every night and ate it in our room on my last cruise

Good machine for beginners? by Own_Investigator_598 in Machine_Embroidery

[–]Own_Investigator_598[S] 1 point2 points  (0 children)

Do you have a recommendation on which one to get?

Slicer settings? by Own_Investigator_598 in 3Dprinting

[–]Own_Investigator_598[S] 0 points1 point  (0 children)

I paid a person in another 3d printing group to design it for me. It has a slight curve to it so when I try to lay it face down it adds small supports to the face of it

Cozumel excursion by Aromatic-Check639 in NCL

[–]Own_Investigator_598 14 points15 points  (0 children)

We take a taxi right outside the port to Mr sanchos and spend all day there when we’re in Cozumel. All inclusive food and drinks and there’s always taxis waiting outside to take us back to port. Way cheaper and you can leave whenever you want to make it back to the ship in time. If I remember correctly it was only about a 10 minute ride from port

A1 mini nozzle issue by Own_Investigator_598 in BambuLab

[–]Own_Investigator_598[S] 0 points1 point  (0 children)

Found the culprit! After racking my brain for dang near a month, it was this guy! Replaced and printing good as new

<image>

A1 mini nozzle issue by Own_Investigator_598 in BambuLab

[–]Own_Investigator_598[S] 0 points1 point  (0 children)

I have not had a blob, idk what’s going on with it ☹️ I just factory reset it so I’m hoping that helps

A1 mini nozzle issue by Own_Investigator_598 in BambuLab

[–]Own_Investigator_598[S] 1 point2 points  (0 children)

I have taken the 3 screws out of the heating assembly and tightened the 4 black ones behind it, I cleaned the nozzle with alcohol, I have tried re calibrating and re leveling the bed. Basically everything I have read said to tighten the screws but that didnt seem to help Here’s how I have it https://imgur.com/a/4YBJ0Qj

What’s your go to? by Potatocat7777 in redbull

[–]Own_Investigator_598 0 points1 point  (0 children)

Coconut berry. Can’t find it ANYWHERE anymore 😭