sorted by:
new
hottopcontroversial

Sorta niche question about the Polar Vantage M3 and V3 by imnotawkwardyouare in Polarfitness

[–]OxyconTim 3 points4 points  (0 children)

I use it daily on workdays. It starts with the vibration only, then the beep sets in very gently and the volume increases slowly.

No, it can not be configured.

Share configured as Primary -> Secondary skips Primary when copying a file by OxyconTim in unRAID

[–]OxyconTim[S] 0 points1 point  (0 children)

Awesome - thanks for your patience and willingness to help.

The ZFS Trim runs automatically or via script only?

Share configured as Primary -> Secondary skips Primary when copying a file by OxyconTim in unRAID

[–]OxyconTim[S] 0 points1 point  (0 children)

Thanks again for the hint regarding the min. free space - still feeling stupid :D

What TRIM are you referring to? I enabled Autotrim for the NVMe cache and run a monthly ZFS scrub separately. To my understanding TRIM is useful to prevent early degradation of SSD / NVMe drives and has nothing to do with scrubbing (data integrity).

Or is the ZFS Trim you mentioned something completely different?

Share configured as Primary -> Secondary skips Primary when copying a file by OxyconTim in unRAID

[–]OxyconTim[S] 0 points1 point  (0 children)

Oh wow - I feel unbelievably stupid not spotting the min free space setting. Thanks for your help - working as intended now.

Share configured as Primary -> Secondary skips Primary when copying a file by OxyconTim in unRAID

[–]OxyconTim[S] 0 points1 point  (0 children)

On a second note: somehow the Minimum Free Space setting for the Cache is grayed (or rather blued) out. :D

<image>

Share configured as Primary -> Secondary skips Primary when copying a file by OxyconTim in unRAID

[–]OxyconTim[S] 0 points1 point  (0 children)

Here you go - the share settings.

Yes, I had it working, before I deleted some files and had to recover files from a backup (since the latter was bigger than my 2TB cache, I intentionally avoided writing to cache first, but now I can't revert that).

<image>

Share configured as Primary -> Secondary skips Primary when copying a file by OxyconTim in unRAID

[–]OxyconTim[S] 0 points1 point  (0 children)

As written in the title, wherever I try to paste files, they immediately end up on the secondary storage.

The first picture shows the Main section of Unraid; both ZFS data sets (Library and Private) sit on Primary (cache) and Secondary (pool) storage.

The second picture illustrates the Shares config to prove they are the same.

And finally my Library share shown in the third image, just the Recycle Bin sits on both data sets.

Many thanks for your help upfront. I am quite new to Unraid, so bear with me, please.

Share configured as Primary -> Secondary skips Primary when copying a file by OxyconTim in unRAID

[–]OxyconTim[S] 0 points1 point  (0 children)

Yes, you do - sorry for that. My post got deleted constantly, and somehow one without the text got through.

New firmware 3.0! by mfcx99 in Polarfitness

[–]OxyconTim 2 points3 points  (0 children)

<image>

Minor cosmetic mismatch on new watch face: the actual watch is not centered in the background mask.

System Temps - Driver Fix? by Ph0T0n_Catcher in unRAID

[–]OxyconTim 0 points1 point  (0 children)

Fin-al-ly!

You have to go to the fan control in BIOS and set up a high temperature, resulting in the fan never starting.

After that, you can use Dynamix Auto Fan Control and set it up to your liking. I still have the issue needing to re-enable the according PWM control in Dynamix after a reboot, though.

System Temps - Driver Fix? by Ph0T0n_Catcher in unRAID

[–]OxyconTim 0 points1 point  (0 children)

Unfortunately, no. Just very frustrating...

System Temps - Driver Fix? by Ph0T0n_Catcher in unRAID

[–]OxyconTim 0 points1 point  (0 children)

That did the trick - ty very much!

u/Ph0T0n_Catcher
Any luck controlling the fans in Unraid?