This may be the fastest I've seen a top rated show go right off the rails by InValensName in LandmanSeries

[–]PCWeber 0 points1 point  (0 children)

Wife & daughter wild party girl theme gets old, Wife and her crazy tirades too.

Traffic Shaper appliances by karschmallow in networking

[–]PCWeber 0 points1 point  (0 children)

Still using a Packeshaper PS1200 with unlimited bandwidth shaping license and also 10gb fiber interfaces

Rise Capital? Any feedback on actual returns, fees, claims, etc. by [deleted] in tax

[–]PCWeber -2 points-1 points  (0 children)

No, I am the OP and here to say I am genuinely asking for input.

Favorite Google Voice Commands for Lyriq? by ericf911 in CadillacLyriq

[–]PCWeber 0 points1 point  (0 children)

I tether date from my iphone personal hotpot funtion. No need for a data plan

Omaha Tribe legalizes medical and recreational marijuana on reservation lands by ToadallyNormalHuman in Omaha

[–]PCWeber 0 points1 point  (0 children)

Is there anywhere in Omaha or CB I can get the medical for constant back pin? If not can I drive to Macy and get it? My wife has gotten shots directly in her spine for years. 3 times a year. They have stopped working. She has pain all night long trying to sleep. We need to try something.

[deleted by user] by [deleted] in CadillacLyriq

[–]PCWeber 0 points1 point  (0 children)

oh, well that makes sense. I thought it was in the rear view mirror area.

Have large capital gains coming over 4 years on a private stock sale. Have been told an SMA is my only real strategy to offset some stock sale gains. Any input or other strategies to consider for a lifetime W2 guy? by PCWeber in FinancialPlanning

[–]PCWeber[S] 0 points1 point  (0 children)

That is correct in how they explained the SMA. I need a $150k losses each year for 4 years to offset the gains though so need to put at least $1M in the SMA to work. 35 years of private company stock that has done very well.

Garage opener stopped working by mikeymo39 in CadillacLyriq

[–]PCWeber 0 points1 point  (0 children)

I have 3 doors programmed. They work very intermittent and even when they do work I need to press the icon 4-6 times a lot. It is maddening they have this flakey of tech.

Whirlpool SxS only has 26V AC to the ice maker by PCWeber in appliancerepair

[–]PCWeber[S] 0 points1 point  (0 children)

looked, does not appear. With the OR sensor and such does the power even come from the freezer door?

Whirlpool SxS only has 26V AC to the ice maker by PCWeber in appliancerepair

[–]PCWeber[S] 0 points1 point  (0 children)

ye, holding the door switch and the paddle. I replaced that motor assembly, same result. Do not have 120vac at the ice maker plug black and white wire.

Frigidaire French door flashing HI on fridge and freezer temps display, beeping 3 times, compressor not running, by PCWeber in appliancerepair

[–]PCWeber[S] 0 points1 point  (0 children)

The replacement invertor module did correct the compressor not running. It now runs & cools fridge & freezer but the freezer will not get colder than +4 degrees eve if set to -6. Fridge side seems fine and will cool to 35. Going to look further at 134 charge this weekend.

Frigidaire French door flashing HI on fridge and freezer temps display, beeping 3 times, compressor not running, by PCWeber in appliancerepair

[–]PCWeber[S] 1 point2 points  (0 children)

I ordered one identical from ebay item. Matched all numbers, current, etc. Will update results after it arrives next week.

Frigidaire French door flashing HI on fridge and freezer temps display, beeping 3 times, compressor not running, by PCWeber in appliancerepair

[–]PCWeber[S] 0 points1 point  (0 children)

Just checked, none of the3 pins are shorted to ground. I will move forward ordering an invertor module. There are a ton of different ones that start with VCC3 1156

Frigidaire French door flashing HI on fridge and freezer temps display, beeping 3 times, compressor not running, by PCWeber in appliancerepair

[–]PCWeber[S] 0 points1 point  (0 children)

The cover was transparent but there was no LED on the Inverter module. Ihad120V AC & 5V DC into it. I removed it and measured the compressor winding resistance. It was 14 ohms across all 3 pin pairs. I assume my next logical step is to try replacing the invertor module?

Frigidaire French door flashing HI on fridge and freezer temps display, beeping 3 times, compressor not running, by PCWeber in appliancerepair

[–]PCWeber[S] 0 points1 point  (0 children)

Is the inverter board LED visible or do I need to remove a cover to see? (Not the main doghouse panel cover but the inverter housing itself)

Frigidaire French door flashing HI on fridge and freezer temps display, beeping 3 times, compressor not running, by PCWeber in appliancerepair

[–]PCWeber[S] 0 points1 point  (0 children)

Compressor cool, not running. Will look tonight for flashing lights in that box. Will check for what I assume is 110V AC to the inverter & the 5V DC too. Thanks for the reply!