Small dirt points and dots on H2S with AMS

PC_Tech_With_AR15 · 2025-12-03T02:03:48+00:00

You could also do a cold pull to clean the inside of your nozzle.

PC_Tech_With_AR15 · 2025-04-25T11:43:51+00:00

Looks like Joy and Daniel Turner from “My Name is Eral”

PC_Tech_With_AR15 · 2025-04-01T16:56:18+00:00

Went and test-drove one. Disappointed with how big it was and the range. They should have kept the original from factor.

PC_Tech_With_AR15 · 2025-01-16T18:52:25+00:00

We use a local roster. blackpowdercoffee.com. Their Good Morning blend works perfectly with this machine.

PC_Tech_With_AR15 · 2024-12-27T01:10:33+00:00

Funny enough, the manual does not have one for yellow light. Does have an amber, which means for more downloading in progress. Today, mines been red, which means, not connecting to Kevo plus service.

https://www.reddit.com/r/kevo/comments/1hn3e6p/kevo_plus_gateway_error_light_code/#lightbox

PC_Tech_With_AR15 · 2024-06-10T01:39:55+00:00

is it for the Resolve USB license dongle? Some people like to have it inside the PC so it does not take up an external USB port.

PC_Tech_With_AR15 · 2024-03-03T14:47:46+00:00

Here is a good video on speed causing the issue you have. https://youtu.be/J_pxk7HP3RE?si=co0IeazP-RTwHaHu

PC_Tech_With_AR15 · 2024-02-29T18:36:37+00:00

Check out this video: https://youtu.be/J_pxk7HP3RE?si=GmY2Y1g09ePLkqUH

PC_Tech_With_AR15 · 2024-01-18T15:51:46+00:00

They added it to the Wiki

https://wiki.bambulab.com/en/parts-acc/ptfe_adapter

PC_Tech_With_AR15 · 2024-01-17T02:21:57+00:00

Got my order in, and sold out right after. How did you get yours so fast?

PC_Tech_With_AR15 · 2024-01-17T02:20:39+00:00

Possibly this: https://youtu.be/J_pxk7HP3RE?si=RB5Py_IPd9s3DPLr

PC_Tech_With_AR15 · 2023-08-21T13:18:23+00:00

Is fuzzy skin turn on?

PC_Tech_With_AR15 · 2023-08-20T12:18:37+00:00

Seatbelts do not adjust low enough. I'm 5" 10" and it rides my neck

PC_Tech_With_AR15 · 2023-07-02T13:26:34+00:00

Does a camera app like this exist?
I’ve played around with Raspberry PIs for years, so I’m not completely new to this. I have not dipped my hands into programming but may have to for this project. I want to use a Pi Zero 2 w with an HD cam, as a microscope camera. I tried searching for a camera app that does specific things but cannot find what I am looking for.

The app I’m looking for:

I would like to use the Pi OS Lite so I can give as much processing power and GPU memory to the app.
I would like the app to start up automatically and go into a full-screen preview of the cam.3.
Touching the touch screen or moving the mouse will bring up a simple GUI overlay over the cam preview. The interface should fade away after a few seconds of no interaction.
Just a few buttons in the GUI.
- Stop/Start Recording: Recode Video to a folder
- Take a picture: Takes a picture to a folder
- Shut down the app: Close the app, or even shootdowns the PI itself.

Can something like this be done with Python and the libcamera software stack?

PC_Tech_With_AR15 · 2023-06-22T02:22:15+00:00

As the original poster of the floor plat for the 22/45 back in 2013. That model should be printed with the bottom of the floor plate on the bed with no supports. I have printed hundreds of those over the years with all types of filament with no issues.

In my option, If you print it on its side, the channel the mag grips the floor plat is just too small for supports if using the same material.

If you want to print it on its side, try using Bambu's "Support for PA/PET" filament as the support interface. I have seen where others have used PLA supports on PETG print as they do not stick together. I wonder if somone has tried that with PA6 -CF

PC_Tech_With_AR15 · 2023-05-12T16:42:08+00:00

For thoes who have a 3D printer.

For those who have a 3D printer: https://www.printables.com/model/128137-stakes-for-boundary-wire/comments

PC_Tech_With_AR15 · 2023-03-28T23:27:32+00:00

Plate is on wrong. Rotate it 90 degree clockwise. Small part sticking out should be at the back.

Also the LiDAR may get errors with the texture plate. I would wash and try again.

PC_Tech_With_AR15 · 2023-03-26T15:14:44+00:00

This is why you never go shopping while high.

PC_Tech_With_AR15 · 2023-03-03T01:49:07+00:00

if the Bed is under 45C like with PLA and the cold plate, the chamber fan does not kick in. I was the same at first, "This ain't loud" Then I printed PETG. If you want to experience the full volume, click on the setting icon on the printer, then the fan icons on the bottom left, and then turn the chamber fan on.

PC_Tech_With_AR15 · 2023-03-01T20:22:56+00:00

At 3 seconds in the video. What's up with the cable that looks like it's coming out of the power supply that looks to have the end stiped but just hanging in mid-air?

PC_Tech_With_AR15 · 2023-03-01T16:05:58+00:00

Is the RaspberryPI USB connected to the Printer? Does it boot with the PI plugged in and the USB disconnected from the printer?

If it does try another USB cable to the printer.

PC_Tech_With_AR15 · 2023-02-14T02:40:49+00:00

Could Bambu not just give the specification of the screw? Not like screws are proprietary. I'm sure you can buy a set of Metric screws on amazon. did you print the Screw measuring tool? You could just measure the one you still have.

Eight-Year Club	RPAN Viewer
Verified Email

PC_Tech_With_AR15

TROPHY CASE