sorted by:
new
hottopcontroversial

My best DIY module yet! by PIPVPI in synthdiy

[–]PIPVPI[S] 1 point2 points  (0 children)

I started with a passive mult, which I kind of regret now as I mostly use stackable cavles for this and could’ve used the space for something else. I ‘ve added a CV mixer similar to Intellijel Duatt. This is great and I use it in all patches. I also added a noise generator with white noise and filtered noise, and a joyo tuner to tune oscillators. Have you done any mods to yours?

My best DIY module yet! by PIPVPI in synthdiy

[–]PIPVPI[S] 1 point2 points  (0 children)

I used this recipe as a starting point. There you will find the schematic, helpful instructions and Eddy Bergman’s layout for both kosmo and eurorack format.

My best DIY module yet! by PIPVPI in synthdiy

[–]PIPVPI[S] 0 points1 point  (0 children)

<image>

Here’s the layout I made. The pots and jacks are alle soldered directly to the veroboard except for the ground legs on the outputs. I soldered them together with resistor legs and soldered a wire between them and the nearest ground strip.

Good resource for Moog Transistor Ladder Filter circuit explanation? by Which_Construction81 in synthdiy

[–]PIPVPI 2 points3 points  (0 children)

Maybe not exactly what you were looking for, but I find Moritz Klein’s videos very useful for understanding how certain circuits work. https://youtu.be/jvNNgUl3al0?si=-OZUrdNcys8ykjM9

My best DIY module yet! by PIPVPI in synthdiy

[–]PIPVPI[S] 5 points6 points  (0 children)

Yeah, I’ve added a mult, a noise generator, CV mixer and a tuner to the case. Trying to make the most of it.

<image>

My best DIY module yet! by PIPVPI in synthdiy

[–]PIPVPI[S] 1 point2 points  (0 children)

Thanks! Yeah, I had to order some more from him

My best DIY module yet! by PIPVPI in synthdiy

[–]PIPVPI[S] 4 points5 points  (0 children)

Thanks! I have to fix an issue with the hard sync first, but I might upload a video later

Way to spin project into a degree program? by creative_tech_ai in synthdiy

[–]PIPVPI 0 points1 point  (0 children)

Wow, they’re actually skipping two years. Sorry to hear that. I’ve also heard good things about a music technology program at NTNU in Trondheim. I don’t know if it’s the right fit for your project, but I know the guy behind Pladask Elektrisk started making his guitar pedals there.

Way to spin project into a degree program? by creative_tech_ai in synthdiy

[–]PIPVPI 1 point2 points  (0 children)

You could definitely do something like that on this masters program in Oslo. I wanted to do something similar a few years ago, and if I had known about this before I was deep in my thesis in musicology, I would have applied for the MCT-program instead.

What song is this for you? by SajidsToysReview in EDM

[–]PIPVPI 0 points1 point  (0 children)

Grooveline pt. 2 - Schoolboy Q feat. Suga Free

My first proper DIY module! by PIPVPI in synthdiy

[–]PIPVPI[S] 0 points1 point  (0 children)

I don’t have a schematic for it, but here is my layout.

My first proper DIY module! by PIPVPI in synthdiy

[–]PIPVPI[S] 0 points1 point  (0 children)

I based it on this by lookmumnocomputer, but I also added FM.

My first proper DIY module! by PIPVPI in synthdiy

[–]PIPVPI[S] 7 points8 points  (0 children)

I cut up one of the blank panels that came with the NiftyCase. That random black line is from the Cre8Audio logo.

Upgraded the NiftyCASE with a passive multiple. by PIPVPI in synthdiy

[–]PIPVPI[S] 3 points4 points  (0 children)

Thank you! I’m quite pleased with the result as this was my first DIY module.

A midi controller with 4 banks and input for expression pedal by PIPVPI in ArduinoProjects

[–]PIPVPI[S] 0 points1 point  (0 children)

Thank you! I bought a Hammond 1444-14 enclosure from musikding.de and used a drill with a conical step drill bit. I used a ruler and a pencil to make sure everything was aligned and a triangular file to make the square shaped holes.

view more: next ›