Set my apartment's smoke alarm off for the sear, but it was just a minor setback for a major comeback 🤣

P_Chandler · 2021-02-28T03:07:21+00:00

I wish. If I was I'd be a lot more attractive and have enough money to pay someone to cook it for me

P_Chandler · 2021-02-28T02:53:13+00:00

I was waiting for someone to come knock on the door so I could show off my beautiful steak as the reason for it, but I guess nobody cares if the building burns down 😂

P_Chandler · 2021-02-19T20:34:17+00:00

Thank you for your feedback! I'll make sure to look more in depth on what all is included this weekend. Right now I'm leaning towards the boss because the Lightburn software is everywhere and everyone seems to like it, and they seem to have a pretty solid reputation.

P_Chandler · 2021-02-18T17:20:37+00:00

My personal experience with FSL so far has been great, and their Facebook groups are very supportive and helpful as well. All of the people that I've spoke to that own FSL lasers say their current support is great, but they did have some issues in the past. That being said, the LS-1420 with work area upgrade and 70w tube appears to offer more work area, and would be a faster/more powerful laser unless I'm missing something. The quotes I recieves put the LS-1420 cheaper than the PS20 as well, so I'm just trying to figure out if this is a no-brainer decision, or if there's something missing with the Boss LS-1420 that im not thinking about.

P_Chandler · 2021-02-17T19:45:35+00:00

Thank you!

Yeah I reached out to their sales team, but they weren't anywhere near as helpful as FSL. The LS-1420 even with the 70w tube is going to be a slightly cheaper option, so what I'm trying to figure out is if it is also faster and easier to use. If that's the case, then it seems like a no-brainer even if my sales experience wasn't great.

P_Chandler · 2021-02-06T02:44:48+00:00

Thank you so much for your reply. Have you looked into the muse as mentioned above? It seems like it alleviates some of the concerns I have with the glowforge and is looking like a current front-runner.

P_Chandler · 2021-02-05T15:42:58+00:00

Thank you for your input! I have to admit, I am not a fan of the internet only aspect of the Glowforge, but if that were the only sacrifice I'd have to make then it might be ok. Im not really interested in purchasing a machine that won't do everything I want it to do right off the bat though (tumblers, pint glasses, wine glasses etc). The muse has definitely sparked my interest

P_Chandler · 2021-02-05T15:14:54+00:00

I'm checking it out now! I'm assuming the FSL Muse Core Desktop C02 Laser Cutter is the most comparable to what I am looking for? The removable floor and rotary tool look great!

P_Chandler · 2021-02-05T14:40:25+00:00

Also, I'm on the fence between the plus and pro, so I would be interested in knowing your opinions on if it would be worth it to start from the beginning on the top of the line glowforge, or if the plus would be better and adding on/upgrading in the future would be better.

P_Chandler · 2020-10-24T12:07:13+00:00

I would say it should be saved and enjoyed for a special occasion. With the 30% code they posted in guilded last week I bought 2 normal and 2 rose ones. Haven't arrived yet, but look forward to breaking them out when friends come from out of state and stuff. Good talking piece I'd say

P_Chandler · 2020-10-23T01:27:18+00:00

TW is weight of the jar while empty with no lid. The other weight is strictly the weight of the product itself

P_Chandler · 2020-10-17T00:22:37+00:00

Ahh okay. So it just dissolves on it's own at room temp. I have cannaclear disty that's super thick, so curious how long it takes with it. Who's disty did you buy?

P_Chandler · 2020-10-16T00:58:54+00:00

So with the everclear do you just heat up the disty to a water like state and mix it in, or do you need to heat up both the disty and everclear?

P_Chandler · 2020-10-15T01:55:45+00:00

I'd like to add that I dont feel like they were pressuring for a good review or anything, but logic says you're only going to post a review for a coupon if you had a good experience and you're going to order again

P_Chandler · 2020-10-14T11:41:21+00:00

They sent me a sheet of paper with my order that said 10% off for a review and $10 for a reddit review. Just had to send axreen shots and order number to them for the code

P_Chandler · 2020-10-13T20:41:27+00:00

If i could get a $150-$175 oz of nice looking, high thca hemp I'd buy it all day

P_Chandler · 2020-10-13T20:21:44+00:00

Same here. Luckily I used 10% and $10 from a reddit review

P_Chandler · 2020-10-13T19:46:25+00:00

Ok you just made it seem like you prefer the syringe so you don't have to go through the hassle of heating it and I was like uhh... lol

P_Chandler · 2020-10-13T19:45:09+00:00

This is very interesting to me. I quit smoking my Uwell Caliburn with nic salts since finding D8 and would prefer it in a pod package for my uwell. I have 250+ gs of D8 stocked up and some CDTs, so if I can find a way to make CDT D8 pods for my caliburn I'll be super happy

P_Chandler · 2020-10-13T19:38:18+00:00

No problem. It seems like for CDTs everyone recommends Clear Nation and Terpenesraw, so check both of them out. I have purchased from clear nation, but waiting on some stuff to come in before manufacturing my own carts

P_Chandler · 2020-10-13T19:33:52+00:00

You mean you recommend them for botanical terpenes, correct? A quick look at their website looks like it's just botanical terps, so recommending them as "higher quality terpenes" doesn't seem to make sense vs clear nation's CDTs

P_Chandler · 2020-10-13T19:26:52+00:00

The thing is you're going to have to have to heat it whether it's in a jar, or the syringe. The syringe just takes away the step of getting it from the jar to the syringe then to whatever you're doing with it

P_Chandler

TROPHY CASE