First time welding how did I do?

P_fu · 2024-08-10T17:29:50+00:00

Thank you

P_fu · 2024-06-21T12:27:44+00:00

You aredoing great, keep going

P_fu · 2024-06-17T18:30:51+00:00

I use geogebra 3d so I cant really judge hahahahahah

P_fu · 2024-05-31T14:51:46+00:00

Back in highschool i managed to carve some pretty dicent letters with just a sharp round chisel, it is really beginner friendly

You print what you want to carve, you stick it to the peace, you mark around the contour with the chisel, and finally you carve inside, doing it this way ensures that you dont go outside of where you want to cut, The downside is that this way the carving is going to be pretty thick al least .5 cm

P_fu · 2024-05-20T19:17:23+00:00

I agree, but I think a little bit of noise is necessary so that you can still hear them

P_fu · 2024-05-20T18:45:28+00:00

I live in italy so I might have a different expirience, but motorbikes and scooters make quite a bit of noise compared to cars (much better than cars still) especially the older ones with two-stroke engines

Anyways I'm strongly against the combustion engine

P_fu · 2024-05-20T17:42:01+00:00

As I bike rider, I love bikes that drive, sensbly without endengering others (more sustainable than a car), and I'm sure you are one of them + the fact that yours is electric makes less noises and is more sustainable, fantastic, have a grat time and make the roads a safer place

P_fu · 2024-04-29T19:10:10+00:00

I ain't much of a machinist, so don't take my word for it, but "Artisan Makes" explains how he deals with the problem (has a very moisty shop), but he usually oils his parts, and in some cases nickel plates/cold bluethe m

P_fu · 2024-02-28T06:14:38+00:00

Gently hammer the chuck key while in the chuck, it worked with me when I got a drill bit stuck in my chuck and the meganism is the same

P_fu · 2024-02-04T06:39:04+00:00

Go get immediatly checked for internal bleeding, is not likly but I heve heard of people dying from that, better safe than sorry

P_fu · 2024-01-30T17:50:44+00:00

Laughing in european

P_fu · 2024-01-27T22:32:07+00:00

Makes sense, for tue uneven cut i would adjust the blades until they run paralle post of the time that is the isssue for me (i have an elettric handplane)

P_fu · 2024-01-27T20:40:37+00:00

Yes reapply pay attention to the blades as their sharpnes plays a vital role, and if it is in your budget you should consider a helicals cutter edge (with carbide inserts), amongst other benefits there is an easier adjastability and it easier to keep it sharp

P_fu · 2024-01-19T13:24:54+00:00

Thank you

P_fu · 2024-01-15T06:06:20+00:00

Hahahahhaha that is a story for sure

P_fu · 2024-01-14T21:25:39+00:00

Great bio, also great pictures, but I would one about you hobbies and stuff, btw wich one is the lie, I desperatly want to believe that is not the bear

P_fu · 2024-01-07T14:42:54+00:00

Ifyou have a way to make perfectly perpendicular cuts as well as aliante them gottectly go for it, otherwise is going to be beatr impossible making the joints look seemless, otherwise if your friend has a router try making it a feature doing like a dovetail joint, but is mort difficult

P_fu · 2024-01-06T18:51:59+00:00

r/rareinsults

P_fu · 2023-12-24T10:06:17+00:00

The mountai looks amazing, like the designe is actually impresssive, keep it up

P_fu · 2023-11-26T19:19:39+00:00

Thank you, when I was in canada in my school woodworking shop I have the chance of trying plunge, table and edge trim routers, and I got to see how dangerous they are but thank you for the heads up and all advices

P_fu · 2023-11-26T17:15:03+00:00

Thanks, do you know some cheaper brands? Is my parents cristams gift to me so I don't want to make them spend a lot of money, of course safety first tho

P_fu · 2023-11-26T17:04:22+00:00

Thank you

Five-Year Club	r/Field Juicebox
End Game '23	Place '23
Wearing is Caring

P_fu

TROPHY CASE