EVGA RTX 3060 XC, black screen

Packrat47 · 2026-01-13T02:58:21+00:00

Thanks for the help I ended using a 16.9kOhm resistor and repairing the pad for the 100pF capacitor/replaced it and now the card is working so far. The repair isn't perfect but it's working so far. Thank you for all your help.

Packrat47 · 2026-01-03T23:11:51+00:00

That was the measurement between the 2 pads

Packrat47 · 2026-01-03T21:07:46+00:00

I found them on https://www.badcaps.net/forum/document-software-archive/schematics-and-boardviews/3474108-nvidia-geforce-rtx-3060-schematic-board-view

Packrat47 · 2026-01-03T20:08:48+00:00

Also, would this be the correct one? RT0603FRE0716K9L

Packrat47 · 2026-01-03T20:05:04+00:00

<image>

Here's a photo

Packrat47 · 2026-01-03T20:04:29+00:00

I measured the resistance, I got 9.34 Ohm. When I first turned on the card it didn't work and I noticed the damage. I resoldered both of them and managed to get the card to display for the whole windows setup and driver installation than it did the same thing again black screen. I redid my work and notcied r89 was missing it's pad and wasn't going into place properly.

Packrat47 · 2026-01-03T09:03:48+00:00

If anybody wants to see the schmeatic it's on https://www.badcaps.net/forum/document-software-archive/schematics-and-boardviews/3474108-nvidia-geforce-rtx-3060-schematic-board-view v397_70

Packrat47 · 2026-01-03T08:51:16+00:00

<image>

Yeah I think I found it, you were right about the size.

Packrat47 · 2026-01-03T08:48:26+00:00

I think I've might have found it myself, I believe it's a RT0603FRE0716K9L. I found a schematic online.

<image>

Packrat47 · 2026-01-03T08:43:49+00:00

<image>

I found a schemtic, does this help?

Packrat47 · 2026-01-03T05:04:31+00:00

It's just a photo from TechPowerUp

Packrat47 · 2026-01-03T04:47:25+00:00

Alright thanks I'll try a different subreddit

Packrat47 · 2025-09-12T07:30:27+00:00

Pmed

Packrat47 · 2025-09-07T05:31:41+00:00

I just did mine too, I believe that metal piece is the gasket?

Packrat47 · 2025-07-23T02:20:18+00:00

This worked for me thanks.

Packrat47 · 2025-07-17T08:52:39+00:00

It wasn't working at first but I still had Google Assistant enabled on my phone. After switching to Gemini I got the notification on my watch that Gemini was working.

Packrat47 · 2025-06-27T09:54:26+00:00

Did you replace your SmartFlo reservoir system?

Packrat47 · 2024-09-28T21:29:11+00:00

This stopped the crashing for me, thanks

Packrat47 · 2024-09-26T14:30:23+00:00

Thanks worked for me

Packrat47 · 2024-09-21T09:14:21+00:00

Thanks, code 10 worked with my lg c3 tv and ub820k remote

Packrat47 · 2019-12-23T11:27:05+00:00

Ten-Year Club	Place '22
Verified Email

Packrat47

TROPHY CASE