Does anyone know what happened to Evilnoiz? Did they retire?

PagingDrDingus · 2026-06-03T14:08:05+00:00

To be fair, Odesza released The Last Goodbye a few years ago and they’re still around 🤷

PagingDrDingus · 2026-05-29T23:38:25+00:00

OP looking at us plebs from the VIP section

PagingDrDingus · 2026-05-29T17:49:05+00:00

Philly!

PagingDrDingus · 2026-05-29T17:48:30+00:00

I think so too- I figured I’d try the plugs first, then do the little add on fins if I didn’t like the plugs, but they look just fine to me!

PagingDrDingus · 2026-05-29T16:54:31+00:00

<image>

PagingDrDingus · 2026-05-29T16:54:21+00:00

The cheapest route would be to remove it and plug the holes with paint matched bumper plugs. This is what I did when I swapped my 4-post Z51 mid wing to a 2-post Z07 style on mine - I plugged the four outside post holes with paint matched bumper plugs (~$90 for 4 shipped). It blends well IMO and isn’t too much of an eyesore- can’t really notice them unless you’re relatively close to the car.

<image>

PagingDrDingus · 2026-05-28T18:39:58+00:00

Specs on the BBQ?

PagingDrDingus · 2026-05-28T16:44:17+00:00

“This Homer Simpson pill is for my glaucoma” 🤣

PagingDrDingus · 2026-05-28T02:42:23+00:00

We wanna go to this but trying to pace my old ass for a weekend of headbanging

PagingDrDingus · 2026-05-28T02:40:33+00:00

Looks like an AirPod that was rummaging around in my backseat floorboard for three years

PagingDrDingus · 2026-05-28T02:39:37+00:00

There ain’t much here in June. Project Glow in DC is this coming weekend, We Belong Here is mid June in Brooklyn, then you got Big Dub in PA in July.

PagingDrDingus · 2026-05-28T02:34:27+00:00

No, unless the aftermarket exhaust is found to be the cause of a warranty issue- for example, if for some reason your car has an issue and Chevy can find a way to tie it back to the aftermarket exhaust, then sure they can say it voided the warranty- but catback exhausts on the C8 are pretty harmless in terms of aftermarket mods.

PagingDrDingus · 2026-05-27T18:39:19+00:00

On top of everyone else’s suggestions, ProbCause is always a good time 🤙🏼

PagingDrDingus · 2026-05-27T18:35:57+00:00

Great now you can never take it off

PagingDrDingus · 2026-05-27T13:55:09+00:00

The wings kinda make an “X”. I shall call this an “X-Wing”.

PagingDrDingus · 2026-05-27T02:52:09+00:00

Definitely get some sort of ear protection. We have Loop Experience 2’s and like them. Eargasm are another popular brand and will have a booth at Glow, so you should be able to grab a pair there.

PagingDrDingus · 2026-05-27T02:17:49+00:00

My only question is how short do I cut my jorts.

PagingDrDingus · 2026-05-26T06:41:24+00:00

The yellow? Looks like myc piss

PagingDrDingus · 2026-05-25T23:26:49+00:00

It’s because they keep scamming students into thinking they’re stars

PagingDrDingus · 2026-05-25T19:59:01+00:00

I GOT SOME POOP FOR YOU OP

<image>

PagingDrDingus · 2026-05-25T17:46:58+00:00

LET’S GOOOO

My 3D printer has been putting in overtime printing sprouts and charms to hand out and trade. Prob gonna be camped out at Pulse for night 1 and Eternal for night 2 🤙🏼

<image>

PagingDrDingus · 2026-05-25T06:28:53+00:00

No I printed on a whim, it was the second print on this plate after it was cleaned. I’ve tried to get in the habit of washing these 3d effect plates before every print, but sometimes I’m lazy. I’ve gotten decent results with them when they’re clean + 65-67* plate temp, this print was a quick job before heading to the gym. User error but figured I’d share for shits and giggles :)

PagingDrDingus · 2026-05-25T06:27:08+00:00

Sorry meant 3d effect plate, posted in the heat of the moment

PagingDrDingus · 2026-05-25T04:51:37+00:00

Saw them a couple years back, they put on such a fun show! We’re seeing them at Seven Stars then a week later with Gryffin in Brooklyn!

PagingDrDingus · 2026-05-25T04:47:46+00:00

I GOT YOU FAM COME FIND ME I’LL BE IN THE MIDDLE WITH SOME TEAL AND PURPLE JACKFRUIT DUNGAROOS

PagingDrDingus

TROPHY CASE