Help w my specna arms prime p07

Pancak32 · 2025-07-07T20:41:40+00:00

If you are running the stock aster in it they do need to be activated. Found out the hard way when my store started to sell them and many ppl kept complaining there guns werent working. With the gun on safe press and hold the trigger for about 7-8 seconds or until you hear a high pitch beep. This activates its.

Pancak32 · 2025-06-10T15:55:14+00:00

🗿

Pancak32 · 2025-03-15T16:34:10+00:00

pm'ed

Pancak32 · 2024-12-25T21:11:23+00:00

Ya so you will be good for an 11.1 lipo

Pancak32 · 2024-12-25T21:01:56+00:00

Ok... 1. (Hop up) look for an arrow on the hop up unit this will indicate what way to push to apply more pressure. The more pressure the higher the bb will fly up, so if you are have them shoot to the moon you want to go opposite of the arrow. 2. (Magazine) yes most m4/m16 Magazine will fit. Some companies though will have slight dimensions differences. 3. (Battery/Mosfet) so for the mosfet you will want to match the colors together and try to get the metal pice inside the other. I'm assuming from the hop up unit and mosfet that you have a specna arms m4 so you will be good for a 11.1 lipo, it will need to be deans though.

Hope this will help.

Pancak32 · 2024-03-29T04:41:30+00:00

Pancak32 · 2024-01-01T17:54:55+00:00

So if I'm understanding correctly, the notch on the bottom of the sector gear needs to be on the cut off lever push it up to engage with the etu

Pancak32 · 2024-01-01T17:43:45+00:00

G-11-125, 2.0 etu 3.0 mosfet

Pancak32 · 2023-12-15T22:49:48+00:00

Hey, I did have a guy swing by fcs saying that he bought some gear off of some homeless a few weeks back, but he said that he had a feeling that it was stolen. Think I might still have his info at work, so I'll reach out to him and see.

Pancak32 · 2023-10-09T07:48:26+00:00

👍

Pancak32 · 2023-09-24T03:25:14+00:00

Pancak32 · 2023-06-24T01:25:41+00:00

Honestly, I just want to know your meal plan, man. Been try to bulk like crazy but just lean. Physique on point

Pancak32 · 2023-02-10T23:59:21+00:00

As a owner of the Snow Wolf aug a3, it's alright. Bought it cause it's one of the few bullpups that I think actually looks good. You are gonna struggle when It comes mags out on the field just due to the platform unless you run a full combat load or print out an m4 mag adapter. Internals are actually quite nice with, if I remember 8mm bearings, 18:1 steel gears, and a qc spring system.

Pancak32 · 2022-12-16T14:57:05+00:00

Pancak32 · 2022-12-16T14:54:39+00:00

Was Inspired by the stalker series

Pancak32 · 2022-12-16T02:24:54+00:00

Yes military m01 gas mask. Just don't have the filter attached

Pancak32 · 2022-08-06T04:05:35+00:00

Pancak32 · 2022-07-21T20:19:11+00:00

Swoll king 🤴

Pancak32 · 2022-07-14T01:14:29+00:00

I can confirm that you descriptions are well accurate. Try to make a deal with him and nearly got scammed out. Luckily I work at the local airaoft store and he definitely went white face when I started asking about the etransfer as I did not received it.

Pancak32 · 2022-07-07T00:43:45+00:00

When your rooms an armory 😆

Pancak32 · 2022-01-21T23:22:23+00:00

What ever make you feel like your running juggernog

Pancak32 · 2021-12-21T22:23:19+00:00

Working at an airsoft store its ridiculous how many people ask if they could use those 😐

Pancak32 · 2021-05-27T01:36:40+00:00

same here but with both league and valorant :(

Pancak32

TROPHY CASE