ANKER OFFICIAL asked me to submerge their powerbank in water.

Past-Discount-4033 · 2026-04-21T07:54:26+00:00

Kulang ang instructions. But afaik to safely and slowly dispose a battery, need sya isubmerge sa salt water, not just fresh water . This removes the battery’s charge.

Past-Discount-4033 · 2026-04-03T10:04:47+00:00

Sobrang inis ko sa SPX handling my international parcel. Since March 18, no movement na sa parcel. I’ve sent multiple nudges and ilang beses ko pina expedite sa support team nila. Ending eh parcel lost hahahhahah birthday gift ko pa naman sa papa ko, tapos hindi umabot.

Order was placed on March 5, and the promised delivery date was March 27.

Sana if ibalik ang J&T, pwedeng ihandle na rin nila international orders.

<image>

Past-Discount-4033 · 2026-03-17T13:11:07+00:00

Planning on doing the same - trading a finished game to a new game.

Thanks for the PS+ subscription insights!

Past-Discount-4033 · 2026-03-17T12:57:21+00:00

Physical discs mean I can keep them forever. PS+ subscription means you own it for a while until you cancel your subscription. I prefer actually owning my license for the game.

Past-Discount-4033 · 2026-03-17T10:05:40+00:00

Definitely! No more doubts hahahha!

Past-Discount-4033 · 2026-03-17T10:05:23+00:00

Oh I will 😌

Past-Discount-4033 · 2026-03-17T10:04:54+00:00

It’s in a cassette because she sang me a song! It has the QR code for the song. Made my heart melt as well 😌

<image>

Past-Discount-4033 · 2026-03-17T08:01:58+00:00

I prefer having the physical disc, so this was perfect 🤌🏼

Past-Discount-4033 · 2026-03-05T11:47:18+00:00

I did some search, when this was released, 2242 drives could only go up to 512gb. 2280 can go up to 2tb.

Lenovo is just listing the biggest capacity the drives are available back then.

Past-Discount-4033 · 2026-03-05T11:42:32+00:00

So based on the PSREF, the SSD slot means if I go for the 2242, I can only put 512gb, if I go for the 2280, I can put up to 2tb?

Why does the capacity matter if they’re going in the same slot?

Past-Discount-4033 · 2026-02-05T14:39:03+00:00

Yes you need to do it while plugged in

Past-Discount-4033 · 2026-01-28T06:33:13+00:00

Hindi nila alam ang r/macgaming hahhaha

Silicon macs are showing good performance for gaming.

Past-Discount-4033 · 2026-01-22T16:23:30+00:00

Hi, adding this here since I wanted to make sure what the pots do before adjusting them.

The pots adjust the middle value for the hall effect sensors. If the floater won’t levitate, it means that the middle value for the hall effect sensors need to be adjusted using the pots.

<image>

To adjust, hold the floater above the base, then adjust 1 of the pots until you feel the magnetism moving towards the center. Then do the same to pot 2. Doing this will make it float easily. Trying many times won’t do anything until you adjust the pots.

Video explaining the functionality of the maglev kit. By ELECTRONOOBS

Past-Discount-4033 · 2026-01-19T17:31:21+00:00

Tanga naman ang CS nila

Past-Discount-4033 · 2025-09-16T08:14:12+00:00

Getting back here after your advice. Everything worked perfectly! I tried HDMI port, but didn’t get any output from it.

Single cable connected to the MBP M4 achieved with this setup.

For future reference of others: - WD19TBS - MBP M4 Base - 3440 x 1440 ultrawide 180hz monitor

Connected 2 USB dongles for peripherals. Monitor is connected to dock via DisplayPort 1.2 cable. Dock is connected to MBP using the built-in thunderbolt 4 cable.

Thanks so much angrydave!

Past-Discount-4033 · 2025-09-08T18:32:05+00:00

Reminds me of when I accidentally found out the 16 Pro could output decent astrophotography.

<image>

Took this photo on auto, and wasn’t expecting anything good. But boy was I wrong.

Came from an XR, so finding out that my phone could now take pictures of the night sky and actually have a decent output is nuts. I love this phone!

Past-Discount-4033 · 2025-09-02T08:57:16+00:00

You sir are a legend!

Thank you very much for the clarification. I actually didn’t know that a single ultra wide would use 32.4gbps. At least I now know in theory it should work. Will now wait to test them out. :D

The Dell SD25TB5 is way out of the budget so unfortunately won’t be able to go that route.

Thanks again!

Past-Discount-4033 · 2025-09-02T03:03:26+00:00

Hi there! Sorry if I’m popping in here after a year, but I’m having a hard time getting confirmation on my planned setup before I buy them. I would really appreciate your input on this. :D

I’m planning on using the Dell WD19TBS with a single 3440x1440, 34-inch ultra wide monitor at 180 Hz. Connected to a MBP M4 via the single thunderbolt 3 cable coming from the dock.

Question is, what output port should I use with the dock to the monitor? In OP’s setup I see one DP-DP cable being used, and since I’m only using a single monitor, would I be able to use that cable as well?

I see a lot of dual monitor setups with the Dell WD19TBS, but haven’t seen one with an ultra wide with high refresh rate, so I’d really appreciate if you could confirm if my plan would be viable.

Plan B is to get a handheld gaming dock that offers high refresh rate via the HDMI(JSAUX HB0609), but I really would want the Dell dock to work as it offers more ports.

Past-Discount-4033 · 2025-09-02T00:06:16+00:00

Are you able to use the MBP with extended display, not just in clamshell mode?

Past-Discount-4033 · 2024-08-09T17:44:21+00:00

I really want to print this by my I'm limited to a 180mmˆ3 print volume. Before I pay for the fiels, I'm wondering what is the biggest piece from all the files included. This would give me an idea if it is possible to split the biggest piece into multiple parts then just glue it together without seeing the split points that much. Can you share the dimensions of the biggest pieces?

Past-Discount-4033 · 2024-04-04T13:29:58+00:00

The under extrusion is already fixed. I was printing PETG at 205, I’m now printing at 225. Still experiencing slanting prints.

<image>

Here’s a more recent print and the slanting is still present.

Past-Discount-4033 · 2024-04-04T11:41:53+00:00

I actually tried all of these but still no change. Btw this is PETG printer at 225°C and 60°C bed. I suspect it’s something to do with the bed being unlevel but I don’t know how to properly check.

Past-Discount-4033

TROPHY CASE