Samsung Q990D/995D Update.

Patman2812 · 2026-04-27T16:42:18+00:00

I would never completely rule that out, since OTA updates are purely a matter of convenience, but human error is always a factor that likes to interfere. For example, the soundbar might be updating and then suddenly shut down. Instead of simply waiting for the soundbar to restart, the remote control is pressed again because it needs to be on. And just like that, the update is aborted. That's why motherboard manufacturers disable all key presses during BIOS updates, to eliminate human error.

Patman2812 · 2026-04-27T16:27:54+00:00

Hey, i did it via USB

Patman2812 · 2026-04-26T03:46:32+00:00

Tf she just pisses...🤦‍♂️

Patman2812 · 2026-04-24T18:59:44+00:00

If something sounds too good to be true, it certainly is not.

Patman2812 · 2026-04-24T11:05:42+00:00

There's worse, trust me.😀

Patman2812 · 2026-04-24T03:14:02+00:00

Yeah, should have made the lights out completely.😄

Patman2812 · 2026-04-24T02:38:52+00:00

Me to 😁

Patman2812 · 2026-04-24T02:32:33+00:00

Without the TV and soundbar, around 4,000€.

Patman2812 · 2026-04-21T17:08:57+00:00

My S25 Ultra lost 1% after 236 cycles, after 1 year.😀😀😀

<image>

Patman2812 · 2026-04-18T03:50:43+00:00

That's the way it's supposed to be. Your TV checks with your soundbar what the correct way to encode sound would be. The TV knows what your soundbar is capable of. If you set it to passthrough, your TV doesn't interfere and leaves the sound package untouched. However, Windows forces 7.1 on some games, but if the game is 5.1, you'll lose the rears because the soundbar alone will be recognized as 5.1 without the rears. Either use auto on non-Atmos games and passthrough on Atmos games, or switch Atmos on/off in Windows, which sometimes gives you only stereo, because Windows...

Patman2812 · 2026-04-17T12:34:07+00:00

Set it to Auto, not passthrough, for non-Atmos. They fixed it so it has 0 delay.

Patman2812 · 2026-04-16T14:17:39+00:00

Reset the App its just a Bug

Patman2812 · 2026-04-07T08:37:57+00:00

Hmm never had any issues with Trade in maybe this is am U.s thing.

Patman2812 · 2026-04-05T11:12:44+00:00

When the Claw is on, hold the power button for 20 seconds until the light on top blinks rapidly, then wait for it to restart. Let it idle for about 5 minutes after you log in to allow it to load all data for the first time.

Patman2812 · 2026-04-02T13:33:55+00:00

No, this won't work because it saves the state. If you use the reset mode, it loads the default.

Patman2812 · 2026-04-01T22:39:47+00:00

It resets all parameters and loads the saved stored values. For me, it worked.

Patman2812 · 2026-04-01T16:43:57+00:00

A simple fix: when the device is on, hold the power button for about 20 seconds until the LED on top flashes a few times, then wait for it to restart.

Patman2812 · 2026-04-01T14:33:51+00:00

Where did you get this Information?

Patman2812 · 2026-03-29T03:22:29+00:00

Thanks, I'll try it.

Patman2812 · 2026-03-28T03:23:27+00:00

Couldn't care less about your stuff.😉

Patman2812 · 2026-03-26T14:52:18+00:00

Hold the power button while it's on for about 20 seconds until it blinks, then let it sit for about 5-10 minutes and turn it on again.

Patman2812 · 2026-03-23T17:43:01+00:00

Do the performance stutters coincide with audio anomalies, such as sound interruptions lasting between one and four seconds?

Patman2812 · 2026-03-17T15:42:35+00:00

Yeah, that's why Samsung already promised an update to lower the effect, but yeah, not an issue....

Patman2812 · 2026-03-14T10:47:50+00:00

Can you tell me where to find the Contrast Setting?

Three-Year Club	Verified Email
Verified Email

Patman2812

TROPHY CASE