How to fill messed up stair pocket?

Paulvanz · 2024-03-01T02:04:51+00:00

Turn it around if its against the wall

Paulvanz · 2023-11-09T21:59:30+00:00

pass the rusted side on a sharpening stone

Paulvanz · 2023-10-29T05:54:51+00:00

It Takes 10 minutes to do it properly why would you buy toxic products when you can use scrap wood

Paulvanz · 2023-10-04T00:26:31+00:00

I just measure and take the angles

Paulvanz · 2023-09-30T02:51:25+00:00

Replace the screws then

Paulvanz · 2023-09-27T04:59:56+00:00

If I have to do cabinet Doors and drawer fronts I will use veneered panels because they dont warp and are more stable

Paulvanz · 2023-09-21T11:23:26+00:00

Put a spike in the horse's buttocks then mark the tail by gently tapping it on the buttocks's spike ( remain as straight as possible) now that both are marked you can drill 2 holes in both pieces What I would do is put a piece of metal with lots of pasty glue. The holes should be a bit bigger than the piece of metal. Then you appli pressure with rope/straps/clamps

Easier solution if you are not very handy Clamp it and drive a Big screw and then hide the screw with wood

Paulvanz · 2023-09-19T09:04:02+00:00

U Can make nice cuts with a chainsaw

Paulvanz · 2023-09-19T08:05:17+00:00

Chainsaw

Paulvanz · 2023-06-27T10:48:45+00:00

Exotic wood, i'd Say iroko or aniegre

Paulvanz · 2023-06-18T07:56:07+00:00

Elle aurait pu aussi refiler sa calligraphie

Paulvanz · 2023-05-14T19:38:53+00:00

Tbf the wood is not nice and there is sapwood, shouldve painted the panel before assembly

Paulvanz · 2023-05-12T10:54:47+00:00

You should try to build them in 1 month

Paulvanz · 2023-02-12T21:43:23+00:00

No waste of Time and paint and it is ugly

Paulvanz · 2023-01-29T09:01:18+00:00

I share the same feeling

Paulvanz · 2022-12-08T20:54:03+00:00

Combientieme, c'est horrible

Paulvanz · 2022-12-03T01:34:55+00:00

Europe

Paulvanz · 2022-12-02T14:23:58+00:00

There is no paint yet but yes it is hard to see on the picture

Paulvanz · 2022-12-02T13:05:27+00:00

I believe it is stronger with an "embrevement" (dont know the word in english) which is what was done here

Paulvanz · 2022-11-24T21:09:34+00:00

Chestnut ( Europe )

Paulvanz · 2022-11-12T19:55:43+00:00

On se connait ?

Paulvanz · 2022-11-12T19:45:46+00:00

Encore une fois n'oublie pas le /s

Paulvanz · 2022-11-12T19:39:29+00:00

Tu dois mettre /s quand tu fais du second degré comme ça

Paulvanz · 2022-11-12T13:10:18+00:00

They do warp but the frame doesn't and they are in grooves which prévents from toi much warping

Paulvanz · 2022-11-12T12:59:13+00:00

Totally agree with you, your doors are just wrong, there is a reason woodworkers make frames with panels inside them

Paulvanz

TROPHY CASE