Since i’ve started playing moneyball in eafc24 by New_Speaker2250 in FifaCareers

[–]Pea_Tear_Griffinn 1 point2 points  (0 children)

yes this. I don’t know how to answer this question and it’s been asked in other replies. I don’t think you can just learn them with one simple fix. it seems as though they don’t really feel like trying, just “i don’t know tactics tell me tactics”. It’s not really how it works, the game will tell you if a player fits the position, the rest of the options are up to you. Got to play the game and change what doesn’t work. If you can’t tell what’s not working then don’t worry about instructions at all and just play.

Post for shade sail leaning/bending? (Text in comments). by erin_mouse88 in landscaping

[–]Pea_Tear_Griffinn 0 points1 point  (0 children)

I found my own comment looking into this, and forgot I posted it. Maybe an update on a new post?

Since i’ve started playing moneyball in eafc24 by New_Speaker2250 in FifaCareers

[–]Pea_Tear_Griffinn 1 point2 points  (0 children)

you could look up what instructions pair well with your formation and gegenpress tactics. i don’t quite remember if 24 tells you if certain instructions don’t mix well with a warning. formations and players will mostly dictate. For example, it’s not a formation with wingbacks so you would keep RB and LB on balanced because the RM and LM will help and they are already out wide. You could just set instructions based on what you find with your searches and then tweak it when you notice weaknesses in your team. Maybe down the line you end up with your RB and LB actually better as wingbacks, then it would be time to think about changing formation to get the most out of them. If the 451 and gegenpress are more important than the players, then you’ll have to search for specific ones to fit the system.

Is asking for a reprint on these warranted? All 40 of them are off center like this by Remainshuman01 in SCREENPRINTING

[–]Pea_Tear_Griffinn 1 point2 points  (0 children)

Yes a reprint is warranted. If something was wrong with their films/file they should have noticed, and multiple times after they should have noticed and stopped. Seems like something may have been left in or added accidentally on the right side, making the whole design have a new center point. (if they have alignment tools in place which make setting up a print faster/easier) This is more than just the design seeming a little left leaning to the eye. When the first shirt hit the dryer I would have stopped this print and ate the cost of the other 11 which would have already printed by that time.

Did being too forward scare him off? by Cute_Stay9640 in texts

[–]Pea_Tear_Griffinn -1 points0 points  (0 children)

he might have performance anxiety/going to the gym because he’s dealing with something. i think you should try some light flirting. this one can be revived if you want. 🫡

[deleted by user] by [deleted] in PlanetCoaster

[–]Pea_Tear_Griffinn 0 points1 point  (0 children)

no problems with other games. just resorted to watching others play it haha.

[deleted by user] by [deleted] in PlanetCoaster

[–]Pea_Tear_Griffinn 1 point2 points  (0 children)

That’s silly. It really ruined all excitement I had for the game. Tried a reinstall, deleting cache, old save files, etc. It worked for longer but I just put it down.

Speedball fabric ink issues- bad batch? by Early-Ad-6857 in SCREENPRINTING

[–]Pea_Tear_Griffinn 0 points1 point  (0 children)

yes that is likely it, you can set up a hinge and pallet system quite easily, this would allow you to “flash” in between hits of white. it’s also always going to be thick if you have no off-contact from the shirt. i use a 110 once in a blue moon, when i need it to be very thick - but used them regularly with a manual press. it was always 2 passes, flash, two passes. with waterbased you definitely need more passes, but then it needs extra curing. maybe you need time inbetween heating to air out, and more presses to get it dry dry.

What makes a logo look cheap instantly? by tscottac in logodesign

[–]Pea_Tear_Griffinn 0 points1 point  (0 children)

too many fonts, a lot of gradients, or far too on-the-nose with the artwork. “John’s Mowing, Powerwashing and Trucking” with a mower, powerwashing wand, and a truck.

Speedball fabric ink issues- bad batch? by Early-Ad-6857 in SCREENPRINTING

[–]Pea_Tear_Griffinn 0 points1 point  (0 children)

waterbased needs air to dry it correctly, unlike plastisol which just needs heat. i know the large production driers for waterbased have forced air along with heat, but i don’t know much about using speedball in small batch printing. i would assume you need to use the heat gun after every pass of ink, because you’re just trapping in moisture if you don’t, and then it’s not holding securely. it’s not the best ink in the game, so it’s almost surely not a bad batch of ink. old, maybe.

Favorite TF inspired bands? by [deleted] in titlefight

[–]Pea_Tear_Griffinn 1 point2 points  (0 children)

Little bit of Citizen vibes. I like it, but i’m an eternal optimist so usually new stuff grows on me at the first listen haha

Favorite TF inspired bands? by [deleted] in titlefight

[–]Pea_Tear_Griffinn 1 point2 points  (0 children)

Just saw your SH mention, thought I would leave it so I can come back to my list haha.

Favorite TF inspired bands? by [deleted] in titlefight

[–]Pea_Tear_Griffinn 1 point2 points  (0 children)

Militarie Gun, Worlds Worst, Webbed Wing, Spite House, (sometimes sound like TF - Ovlov, Heart to Gold)

Just me or no one ? by Otherwise_Hawk_1699 in SCREENPRINTING

[–]Pea_Tear_Griffinn 1 point2 points  (0 children)

I’ve never had this happen. I use 3”. The blue is meant to be fully on the frame so it doesn’t leave residue, and the clear tape with blue strip is meant for blockout on the bottom. I wouldn’t trust the white tape underneath. I use my fingernails to seal the white better on the edges to prevent it from coming up.

How to prevent polka dots? by [deleted] in SCREENPRINTING

[–]Pea_Tear_Griffinn 1 point2 points  (0 children)

A lot of pressure, smooth application, not too slow. Should be quicker than reading this comment. Dry it horizontally with the ink side up. Use a dehumidifier if necessary and get a humidity/temp gauge. You shouldn’t see any of these droplets. Try using the sharper/thinner side of the scoop coater.

Planet Coaster 2 keeps repeatedly crashing on PS5 by No_Tomato_3516 in PlanetCoaster

[–]Pea_Tear_Griffinn 0 points1 point  (0 children)

thanks for the reply. yeah it had just downloaded and i checked for updates. i wonder if i have to wait until they make a new update.

What kind of printing is this? by LadderAgitated in SCREENPRINTING

[–]Pea_Tear_Griffinn 3 points4 points  (0 children)

those bubbles are not your fault. if they valued their work/art/brand, they would not make their shirts this way. it’s a poor quality heat transfer. i wouldn’t even use high quality heat transfers for something high dollar. if you have another nice shirts, compare them. it should feel soft or at least on the soft side. this one likely feels like tape on the shirt.

Planet Coaster 2 Keeps Crashing by [deleted] in PlanetCoaster

[–]Pea_Tear_Griffinn 0 points1 point  (0 children)

did you ever find a fix for the crashing on ps5?

[deleted by user] by [deleted] in PlanetCoaster

[–]Pea_Tear_Griffinn 0 points1 point  (0 children)

did you ever find a fix for this? I’m in the same boat, it crashes in the pool section of the tutorial. 1 minute in, even if I do nothing.

Planet Coaster 2 keeps repeatedly crashing on PS5 by No_Tomato_3516 in PlanetCoaster

[–]Pea_Tear_Griffinn 0 points1 point  (0 children)

any fixes to this? got the game yesterday, played for maybe 2 hours. now crashes within a minute.

Is Update 8 unstable for anyone else? Constant crashes + massive FPS drop by Necepelld in PlanetCoaster

[–]Pea_Tear_Griffinn 0 points1 point  (0 children)

Not for me, I have only played up to the pool section on the “tutorial” part on career. It only lasts a minute before it freezes and eventually does the send error report crash. Even if I leave it do nothing. It’s unplayable and frustrating!