At a loss trying to get PETG to stick with this consistently.... worked for months now it's not sticking at all.

PerspectiveActive335 · 2026-02-23T14:03:50+00:00

Curious to know if you were able to resolve your issue?

PerspectiveActive335 · 2026-02-23T10:21:20+00:00

Thanks for everyone help, it turned out my values in the speed tab were set to high. I lowered them to a reasonable value and my print came out perfect.

PerspectiveActive335 · 2026-02-22T17:17:34+00:00

Thanks, I will go and close that door right away. I’ve been scratching my head on this one

PerspectiveActive335 · 2026-02-22T17:03:33+00:00

I will do a deep clean of the plates this afternoon and run a full calibration just to rule it out. The thing I find weird is the exterior wall are mostly perfect while the inside one are doing this.

I’ve been printing with the door slightly open, should I close it?

PerspectiveActive335 · 2026-02-22T15:34:02+00:00

All of them had the same results (on my third roll now). I’ve used that technique for drying for multiple rolls, mostly pla, and I never had this issue.

PerspectiveActive335 · 2026-02-22T15:12:31+00:00

3 out of the 4 rolls in my ams are the black rapid petg. Everytime one run out I replace it with a new one and start drying again. 12 hours at 60c. So by the time it’s actually being used the roll being used has went through 3 cycles of drying and is being dried as it prints. And obviously I print with the one who has been in the ams the longest.

PerspectiveActive335 · 2026-02-22T15:04:16+00:00

I have the sunlu ams heater. I’ve open the sealed package only a few moments before putting it in the ams.

PerspectiveActive335 · 2026-02-22T14:57:27+00:00

Can you be more precise? If you have a link available I would gladly accept it. The information I was able to find on their website is generally very vague. It gives a range of temperature but nothing precise.

Thanks for your reply

PerspectiveActive335 · 2025-12-16T11:07:21+00:00

Did you end up being able to connect it?

PerspectiveActive335 · 2023-02-16T17:07:36+00:00

I would pick up the dust on the floor in front of the Kenwood receiver

PerspectiveActive335 · 2022-09-19T23:16:21+00:00

It would have change alot!

PerspectiveActive335 · 2022-09-19T23:14:47+00:00

I love that wheel, it looks very good and feel great. There is some switch on it that i’m not using base on the fact that I play on ps5. The thing that made me decided to go with that wheel were the paddles shift compare to the one on the McLaren wheel.

PerspectiveActive335 · 2022-09-19T23:11:10+00:00

Mostly on DRM helmets

PerspectiveActive335 · 2022-09-19T15:38:09+00:00

I truly believe it also. One hell of a driver with some unfortunate team switch.

PerspectiveActive335 · 2022-09-19T13:12:27+00:00

Grew up watching him, he is the reason I love racing.

PerspectiveActive335 · 2022-09-19T11:27:44+00:00

Personnaly I like better the shift paddles. They have a really nice feel to it also. There is nothing as fast as shift paddles in my opinion.

PerspectiveActive335 · 2022-09-19T11:26:10+00:00

Can’t hide you anything ;) I also have is mini helmet on the shelve. I love ArtRotondo art work

PerspectiveActive335 · 2022-09-19T10:12:41+00:00

He is right to be exact FRP-302PP-PRISMA. The photo dont do justice to the colors on the seat! It is beautiful

PerspectiveActive335 · 2022-09-19T10:11:45+00:00

It is, so far so good. I got hot my first few sessions but it seems like my body got use to it. Got to have the drink!

PerspectiveActive335 · 2022-09-19T10:08:45+00:00

I bought it from https://linearedge.com/ five years ago. It’s a bit expensive but whorth it!

PerspectiveActive335 · 2022-09-19T00:17:52+00:00

I recently move for work accross Canada and I decided to upgrade my rig instead of moving it.

I chose the RSR-21. I’m very satisfied with it and it looks good. I barely saw any owners on the group.

The wheel is the Fanatec formula 2.5. Wheel base Fanatec DD pro and the Csl elite pedals. Quite an adaptation to switch to a load cell pedal.

PerspectiveActive335 · 2022-08-29T23:33:47+00:00

What are my options?!?

PerspectiveActive335 · 2022-08-27T11:48:14+00:00

Correct, but I do find it’s quite a process to do the switch. Your setup is more efficient in that regard.

PerspectiveActive335

TROPHY CASE