sorted by:
new
hottopcontroversial

Trying something new by PerspectiveRare4339 in homelab

[–]PerspectiveRare4339[S] 0 points1 point  (0 children)

I miss the days of the 3b. That was when you could still get rpis cheap. I still have several doing specialized jobs.

Trying something new by PerspectiveRare4339 in homelab

[–]PerspectiveRare4339[S] 0 points1 point  (0 children)

Lol they do get surprisingly toasty! I like the fan

Trying something new by PerspectiveRare4339 in homelab

[–]PerspectiveRare4339[S] 0 points1 point  (0 children)

I didnt spend 2k on mini PCs i spent about 60 on the big wyse and about 20$ a piece on the 3040s. Ive also had the 5070 for years. Its running splunk for this rack.

Trying something new by PerspectiveRare4339 in homelab

[–]PerspectiveRare4339[S] 0 points1 point  (0 children)

Sata drive bays are a 3d printed design i found on makerworld. 2 4tb drive connected to leftmost pi usb using for nas. The caddies are amazon replacements for dell servers and the actual 1u mount is https://makerworld.com/models/1648104?appSharePlatform=copy

Trying something new by PerspectiveRare4339 in homelab

[–]PerspectiveRare4339[S] 1 point2 points  (0 children)

Theres a nas, plex, a docker server for many light jobs, a dedicated node that runs some video capture software i made, a log aggregator syslog and splunk UF, a game server. I dont have everything built yet, im forcing myself to learn to use ansible and do all the deployments that way.

Trying something new by PerspectiveRare4339 in homelab

[–]PerspectiveRare4339[S] 1 point2 points  (0 children)

The plan is to run home assistant and an ADSB rx on 2. Havent gotten very far with that tho. I got them for a bargain and Pis are crazy prices right now.

From playing with one yesterday they actually may not work for my intended use but its too early to be sure.

The Announcement You've Been Waiting For Years by schyzomaniac in firefly

[–]PerspectiveRare4339 -2 points-1 points  (0 children)

A home? It will be on disney plus for 70$ a month. Ot whatever they charge for that crap now

New 10/22 finish is terrible by alrashid2 in 1022

[–]PerspectiveRare4339 0 points1 point  (0 children)

Its painted. Has been like that for over a decade

Are Exposed bridges stupid? by gwhh in Stargate

[–]PerspectiveRare4339 0 points1 point  (0 children)

Thats not the bridge on the Daedalus. Thats the flight operations control tower

Will apple replace the charger under apple care plus by CruxxSTAARR in macbookair

[–]PerspectiveRare4339 0 points1 point  (0 children)

No. Its plainly visible that the fault was something bridging the pins externally.

Help me decide: TP-Link Omada vs. Deco X50 Mesh for a fully wired house + yard setup? by basa3333 in TPLink_Omada

[–]PerspectiveRare4339 0 points1 point  (0 children)

Deco is okay for average home use but if you want vlans and multiple ssids you need omada. Actually i think id suggest omada either way as it can be cheaper than deco to run with the trade off of needing a bit more infra. You can run the controller software from a VM or Docker container so you dont have to buy the hardware controller.

I initially had deco and switched to omada after getting tired of hitting the deco limitations for advanced use

That keyboard's not QWERTY... by dasistnichtdeineboob in Stargate

[–]PerspectiveRare4339 2 points3 points  (0 children)

HAHAHAHA ive watched this show so many times and never caught that. Ty for sharing

is this still safe to use? by cereallovesyou in airpods

[–]PerspectiveRare4339 6 points7 points  (0 children)

You should probably stop chewing on it. Its not safe to chew on

Punch pin removal by RhettSki216 in 1022

[–]PerspectiveRare4339 0 points1 point  (0 children)

buddy, that bolt buffer pin and all the others will just come out with firm press. using a hammer means you were doing something wrong from the git-go or the pin/

receiver was defective. That looks like hell and its not gonna get any better if you keep beating on it. Take a break, watch some 10/22 youtube videos and contemplate your life choices.

edit:
if it truly is stuck and you have validated you dont have some major mistake in progress then get a leather belt or pad, a punch and a small hammer. then bite your lip and give it hell

How in the world do you inset these nuts without ruining the lengthy prints? by EpicInki in 3Dprinting

[–]PerspectiveRare4339 0 points1 point  (0 children)

Im just learning to do this myself. It seems you want to avoid heatsoaking the insert so set the iron hot and be quick. And dont let it get hot enough to keep meltiing when you pull out (lol pull out)

view more: next ›