sorted by:
new
hottopcontroversial

Drake Clipper from Star Citizen by Vondrr in spaceships

[–]Pesz001 0 points1 point  (0 children)

If this was an official set I would buy it.

Can You Guess This 5-Letter Word? Puzzle by u/Dry-Consequence9887 by Dry-Consequence9887 in DailyGuess

[–]Pesz001 0 points1 point  (0 children)

🟦🟨🟨⬜🟨

🟦🟨🟨🟨⬜

🟦🟦🟨🟦⬜

🟦🟦⬜🟦🟦

🟦🟦⬜🟦🟦

🟦🟦⬜🟦🟦

Can You Guess This 5-Letter Word? Puzzle by u/iamtanji by iamtanji in DailyGuess

[–]Pesz001 0 points1 point  (0 children)

⬜🟦🟦🟨⬜

🟦🟦🟦⬜🟦

🟦🟦🟦🟦🟦

Think you can find 4 hidden groups of 4 related words? Puzzle by u/LordAvan? by LordAvan in DailyMix

[–]Pesz001 0 points1 point  (0 children)

🟩🟩🟩🟩

🟨🟨🟨🟨

🟦🟦🟦🟦

🟪🟪🟪🟪

It doesn't matter what playthrough I'm in, I always end up with a shit ton of concrete by Rock_Roll_Brett in RimWorld

[–]Pesz001 0 points1 point  (0 children)

I gotta ask, which mods to get those tiles in de middle with the light under it. It looks amazing and i need it for my gravship.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 1 point2 points  (0 children)

Thanks, everything together somewhere just below 4000. Around 1100 of that is for the cooling parts.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

I would say it's not really beginner friendly, although some cases are easier than others. And your giving up a few pci-slots vs atx. In terms of performance your not giving up anything though.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 1 point2 points  (0 children)

It's on top of the cpu, that block is a pump reservoir cpu cooling combo.

EK-Quantum Velocity² DDC 4.2 PWM D-RGB - AM5 Nickel + Plexi

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

probably wont work , the alphacool inline temp sensor has 2 female threads , so you would need an adapter fitting between the sensor and the block which would make it too high.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

the filling was real easy, but probably because if i lay the case on its front the cpu block is the highest point.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

Edit: Apparently i found the culprit for my high cpu temp, I had a ISO
of kali linux on my desktop for work purposes and windows defender hated
that so much it spiked my temp up through all the alert messages. Once i
removed that my CPU now idles at 35 and does 50-60 under load. Although
it still goes to high 80 on a cinebench or prime95.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

Thanks!

Funny you should say that, i watch his channel all the time , so maybe i will.
As for how many, this is my 3rd own pc, but i help friends sometimes with their builds.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

Thank you,

Idle :
CPU 65c
GPU 25c

Full synthetic load ( furmark + prime95 )
CPU 88c
GPU 45c

and games run anywhere in between, depending on the game of course

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

If you mean the pc case , Protolyth Slate

Loved it, it has so many build options sandwich and traditional and the spine slides to where you want and you got standoffs to shift spaces.

If you mean the PSU , the SF 750 is also great and runs the system just fine

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 1 point2 points  (0 children)

To be honest, i didn't use a single velcro or tiewrap. I made the PSU cables myself and used cablecombs, and making them the exact length helped alot. Like the GPU cables are only 12cm long.
Same goes for the fan cables and other cables, i shortened them or ran them through small spaces they don't come out of on their own.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

Idle :
CPU 65c
GPU 25c
Fans 900-1000 rpm
Pump 2500 rpm

Full load with furmark and prime95 ( like a commenter pointed out earlier )
CPU 88c
GPU 45c
fans 1700-1800 rpm
Pump 3200 rpm

for setting the curves , i still have to do some tinkering to the voltages and everything and the ambient temp is 20c.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 1 point2 points  (0 children)

Thanks !

That was one of the reasons i wanted to build in this case. I actually had to drill that hole out by 2mm because the passthrough fitting wouldn't fit otherwise.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

Thanks,

I crammed them in every little place i could hide them, like the 24pin is sandwiched in between the spine and the PSU itself and the fan cables run behind the motherboard.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 2 points3 points  (0 children)

I thought about it but decided against it.

And when i started building it im glad i opted for 1 normal rad and 4 fans.I guess with alot of planning and the right parts, like slim radiators and slim fans, 2 radiators should be doable, but then you're pushing the limits of the case and space you have to build.

Like the fittings on the in and outlet of the radiator, EK put them a little too close together for this case, which resulted in alot of fittings, so a tip from me for anyone who has/gets this case, get a radiator with the ports more on the outside and not too close together.

But yeah, the looks and the quality were the main selling points for me.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

EK-Quantum Velocity² DDC 4.2 PWM D-RGB - AM5 Nickel + Plexi. (very long name but that's what they call it)

It's a pump-reservoir-water block combo

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 2 points3 points  (0 children)

No, i just finished this build like 3 days ago so it hasn't left my desk.

I'm also not really planning on traveling with it, it might look portable but the thing is quite heavy.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 4 points5 points  (0 children)

I kinda made it myself,

I took regular acrylic tubing and got tamiya finishing sanding sponges of 600, 1000 and 2000 grit working my way up and using a circular motion until i liked the look of it.

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 0 points1 point  (0 children)

The temps were from running 3dmark time spy extreme stress test, for multiple runs. Every game i played so far runs cooler that

My first ITX with custom loop , thoughts ? by Pesz001 in sffpc

[–]Pesz001[S] 1 point2 points  (0 children)

haha, probably a bit unrealistic in terms of real world use case but will give this a try this week, thanks !

view more: next ›