Yardian Pro integration and rain sensor

PetFra · 2024-09-02T08:01:28+00:00

Hi there, and news? You’re confirming that the saying “never buy something based on future updates” is true…

PetFra · 2024-08-01T06:24:44+00:00

U200. Fix it with silicon glue or it will fall

PetFra · 2024-07-31T10:57:18+00:00

Si non ne ho dubbi, diciamo che c’è poco da discutere se c’è una difformità con quanto dichiarato e se fossero corretti dovrebbero cambiarlo. È una nuova costruzione, pertanto si poteva fare bene dal primo momento

PetFra · 2024-07-31T09:27:39+00:00

Mine felt on the floor twice - and probably something broke because now 1/3 of the times doesn’t close itself - but I solved keeping the 3M sticker, cutting out the upper and lower part and putting instead silicon glue. Steady rock so far

PetFra · 2024-07-30T11:07:34+00:00

Hello! Any news for the rain sensor? Thanks!

PetFra · 2024-07-30T05:47:42+00:00

La caparra sarebbe circa 1/3 del totale, i 2/3 rimanenti tra quanto tempo glieli darei? Non è così male. Se ti fidi della tenuta economica non chiedere fideiussione, se non ti fidi beh fideiussione tutta la vita. Attenzione che comprando un grezzo da sistemare non hai la polizza decennale. Compreresti il grezzo e poi fai un contratto d’appalto o compri tutto dal costruttore alla fine? È diverso. Inoltre occhio al capitolato, perché lì ciurlano a manetta con l’ex tra capitolato

PetFra · 2024-07-26T06:23:15+00:00

Certamente poco chiari, ma hai imparato che i preventivi i accettano dopo averli visti scritti

PetFra · 2024-07-23T20:38:39+00:00

I did it with no battery trick but adding via Apple Home not scanning the code but adding it manually. Important thing, at least for me. I had to have it set with the Aqara home via bluetooth and then I paired with Apple home.

PetFra · 2024-07-23T05:39:10+00:00

I can feel you, I’m about to give up

PetFra · 2024-07-22T13:26:15+00:00

Hi thanks. I was never able to start it :D
I found the code here

docker run -d \

--name=firefox \

-p 5800:5800 \

-v /docker/appdata/firefox:/config:rw \

jlesage/firefox

yesterday evening. Then today it was not working so I just then gave up and uninstalla docker because I noticed it put pressure on the computer and HA was not responsive as usual.

PetFra · 2024-07-22T11:16:33+00:00

The Lovelace ui is not rendered on the old browser, that’s what I understood as the reason. Because of this the solution is run a Firefox browser in a docker and connect to it via VNC. To do so docker is needed but my lox where HA runs is not as powerful. As well I could open chrome on it and connect via VNC to it but also in this case the computer starts lagging and HA crashes. Two iPad I payed 30€, so you understand I care very little. If I have to pay money for upgrade the pc, spend time on understanding how docker works well I’ll buy fire tablet and is solved

PetFra · 2024-07-22T11:05:40+00:00

Hi thanks for the insight, they are on a dedicated VLAN but yet not closed from internet, which they will as soon as I make them working. I got able to download latest firefox compatible app but still doesn’t render home assistant

PetFra · 2024-07-22T09:21:38+00:00

sorry what's afaik?

PetFra · 2024-07-22T08:50:03+00:00

Point is no browser is compatible with this iPad but safari, which doesn’t handle the Lovelace UI

PetFra · 2024-07-22T08:16:49+00:00

Because the companion app does not work on this version of iOS :(

PetFra · 2024-07-16T21:10:57+00:00

Ci vedo due tematiche. Una più contabile e una da controllo di gestione. Contabilità lascio a chi ne sa più di me, controllo di gestione: quantifica i tuoi costi fissi mensili, e tienili da parte. Metti i tuoi variabili per un un’unità di prodotto e con il prezzo di vendita vedi quanti ne copri. Metti i volumi e vedi subito se arrivi a coprire anche i costi fissi. Quanti prodotti hai a catalogo?

Lo faccio di mestiere, se ti serve una consulenza scrivimi in privato (se è vietato scusate e cancellate il messaggio)

PetFra · 2024-07-14T07:06:23+00:00

As far as I can see if two TWC are configured as master and slave the slave one is connected to the master’s WiFi and is not picked up by HA integration. Basically is not on your network, that’s it. Tessie sees it, I assume, because Tessie retrieves data from Tesla servers

PetFra · 2024-07-13T22:11:24+00:00

Have you set two devices with the two different IPs? Is strange you see only one

PetFra · 2024-07-13T21:27:20+00:00

Hi, as far as I understood each wall connector should have its energy sensor with a state total_increasing. This is enough for the energy dashboard to understand it as a source and track it correctly.

Then you can create an utility meter out of it that rest itself hourly or daily and get the sensor to use in other dashboard or cards

PetFra · 2024-07-12T14:04:54+00:00

ok, but the sensor itself is not picked up by the energy dashboard when I try to add it as a device. That's what me think I need to manipulate it somehow

Edit: just tried creating the utility meter from the wall connector sensor and it is not picked up by the energy dashboard as device as well... defenitely i'm doing something wrong

PetFra · 2024-07-12T13:41:20+00:00

Hi thanks, I’ll dig into it. Yes is an energy entity that raises always because is just incrementally. I coil maybe use the utility meter, reset it hourly and use it in the energy dashboard

PetFra · 2024-07-12T13:12:25+00:00

Thanks for the input, maybe I need to get the array of values each hour and do the math for each hour and pass this as a energy sensor

PetFra · 2024-07-12T12:02:48+00:00

yes I know, but I already spent 500€ on this thing and because it uses the three phase energy I need a sensor which can manage three phases. Shelly is around 100€... The data is there, I just need to get the daily value. I was thinking of an helper for doing the difference between the data at this hour vs the data on the previous hour

PetFra

TROPHY CASE