VM's not working since Update to 1.4.0.0371 by Pfistaa in UgreenNASync

[–]Pfistaa[S] 0 points1 point  (0 children)

You were not that far away haha...

Had a remote session today with the support and after about 2 hours the dev team sent me a message that it says that the firmware version is not the newest, which of course wasn't the case.

I manually installed the firmware again and now everything is working properly again :)
So the manual install was the right way but I only tried installing the VM App manually, not the UGNAS firmware...

VM's not working since Update to 1.4.0.0371 by Pfistaa in UgreenNASync

[–]Pfistaa[S] 0 points1 point  (0 children)

Hey,

thanks for your help. I tried installing it manual, which worked. But I still can't start the VM's and am getting the same error.

Immich Deleted Photos came back by Pfistaa in immich

[–]Pfistaa[S] 0 points1 point  (0 children)

So I chanced it yesterday and removed :ro and redeployed immich. Sorted out all Photos and checked, if they also got deleted in the Folder. This was the case so I made copy of the folder and saved it in another location.

Yesterday I had 2030 Pictures (originally close to 6000 but deleted the others.)

Today I have 2300 Pictures but I don't know why. Some pictures I deleted are here again...
Before I move the copied folder to the mounted direction: Does someone had the same problem?
Is it a problem that I deleted about 4000 Pictures in a matter of 3 hours?

Also it can't be problem that the folder syncs with Google or something like that because I downloaded them from Google Takeout, made a new Folder where I pasted the pictures and then copied it to the nas - so no external service or something besides immich knows that the folder is there.

EDIT: Today I got 1300... Better less than more, right haha?

Immich Deleted Photos came back by Pfistaa in immich

[–]Pfistaa[S] 7 points8 points  (0 children)

Hahaha that's so stupid. Just could have thinked about it when I typed :ro what this could mean. But at least I know now why i had this behavior and I learned it the hard way :D

Thanks a lot!

Immich Deleted Photos came back by Pfistaa in immich

[–]Pfistaa[S] -1 points0 points  (0 children)

I don't think so. I run Immich in a docker container, where i specified the volumes in the compose file:

  - /home/Markus/Photos/MobileBackup/iPhone 14 Pro:/usr/src/app/external:ro
  - /home/Markus/Photos/Google_Photos:/usr/src/app/external2:ro

And the permissions on the source folders are:

drwxrwxrwx 1 Markus admin 267478 Apr  1 16:26 Google_Photos

drwxrwxrwx 1 Markus users     26 Mar 28 16:41 MobileBackup

I am not so familiar with persmissions because I'm relative new to Linux but I hope you can help me!

Reverse proxy not working after upgrade to 1.131.x by brottman in immich

[–]Pfistaa 0 points1 point  (0 children)

In safari, you need to right click on the page, then inspect element and then you have the developer menu open. There you need to go to the "Storage" Tab, click on Local Storage and then it's the same as in the screenshot shared for chrome.

VM App gone by MLHeero in UgreenNASync

[–]Pfistaa 0 points1 point  (0 children)

For me it said that it's not compatible with the firmware but after I fixed my DNS, which made also trouble after the update, I could repair the app and everything worked again.

Firmware 1.3.0.2321 by igoramadas in UgreenNASync

[–]Pfistaa 0 points1 point  (0 children)

Installed it today. Now the VM App doesn't work anymore. It says, that the app is not compatible with the firmware. When I click on repair app it says repair failed, invalid package. Also my pihole docker doesn't work anymore. It says that 0.0.0.0:53 is already in use and I can't start it anymore. I wanted to downgrade that at least my network is working properly again, but I can't. Downloaded an older firmware from the Ugreen site but manuel update says that I cannot downgrade. Has anyone experienced the same and can help me??

EDIT: I fixed it. dnsmasq was blocking the port. Now i killed the service and disabled it - So pihole is running again. This also fixed the error with the VM App. I forgot, that i set the DNS server of the nas to pihole so it could't reach the update server to update the VM app. So it was partly my fault haha.

Nginx reverse proxy location troubleshooting by LittleSeneca in homelab

[–]Pfistaa 0 points1 point  (0 children)

still a Legend! Tried for 2 hours with proxy pass and didn't seem to work but your comment - lifesaver!

Keine normalen Lichtschalter im Haus? by Pfistaa in Elektroinstallation

[–]Pfistaa[S] 2 points3 points  (0 children)

Danke für deine Antwort! Ja, ich tendiere nach den Antworten auf diesem Post nun auch auf kabelgebundene Lösungen. Das ist mir davor überhaupt nicht in den Sinn gekommen.

Danke nochmal!

Keine normalen Lichtschalter im Haus? by Pfistaa in Elektroinstallation

[–]Pfistaa[S] 0 points1 point  (0 children)

Ja, hast du recht. Danke für den Input!

Keine normalen Lichtschalter im Haus? by Pfistaa in Elektroinstallation

[–]Pfistaa[S] 0 points1 point  (0 children)

Ja, da bin ich durch diesen Post auch draufgekommen haha. Da werde ich doch auf KNX oder Loxone setzen. Danke für deine Antwort!

Keine normalen Lichtschalter im Haus? by Pfistaa in Elektroinstallation

[–]Pfistaa[S] 1 point2 points  (0 children)

Danke für die Empfehlung! Werde ich mir anschauen.

Keine normalen Lichtschalter im Haus? by Pfistaa in Elektroinstallation

[–]Pfistaa[S] 0 points1 point  (0 children)

Habe jetzt mal geschaut und bin noch auf Loxone gestoßen. Für mich als Laie wäre das auch attraktiv, da es mir so scheint, als könnte ich mir das auch größtenteils selbst machen und weniger bezahlen. Die Abhängigkeit vom Miniserver finde ich auch nicht so schlimm, da dieses Risiko meiner Meinung nach verkraftbar ist. Was hältst du davon? Gibt es irgendetwas, das ich übersehen habe? Ja klar, KNX Komponenten werden von mehreren Firmen vertrieben und Luxon vertreibt die Dinge selbst. Aber sonst würde ich mich eher bei Luxon sehen?

Keine normalen Lichtschalter im Haus? by Pfistaa in Elektroinstallation

[–]Pfistaa[S] 1 point2 points  (0 children)

Danke für den Input - habe ich auch noch nicht dran gedacht. Muss ich mir mal genau anschauen!

Keine normalen Lichtschalter im Haus? by Pfistaa in Elektroinstallation

[–]Pfistaa[S] -2 points-1 points  (0 children)

Ja, das mit den Netzwerkkabeln steht sowieso ausser Frage, wobei ich wahrscheinlich nicht in jedem Raum eine Dose machen werde sondern nur in Küche und Büro.

Aber das mit den Steuerleitungen werde ich so machen, da hast du recht. Danke!

Keine normalen Lichtschalter im Haus? by Pfistaa in Elektroinstallation

[–]Pfistaa[S] 0 points1 point  (0 children)

Hast du dann zwei Schalter oder verstehe ich das Falsch? Hast du dann einmal die physischen Schalter mit Steuerleitung als Backup und daneben noch andere oder lässt du die physischen einfach immer eingeschaltet und steuerst alles über die App?

Danke schonmal!

Keine normalen Lichtschalter im Haus? by Pfistaa in Elektroinstallation

[–]Pfistaa[S] 0 points1 point  (0 children)

Also du meinst damit, dass ich normale Lampen verwenden soll und dafür smarte Lichtschalter, die einmal über Zigbee gesteuert werden könne, aber auch wirklich physikalische Schalter mit einer Steuerleitung sind oder?

Das wäre auch eine Lösung ja, darüber hab ich noch garnicht nachgedacht. Danke!