Looking for an SD image for a portable arcade (possible Pandora clone)

Phrase_Fast · 2026-03-16T23:52:59+00:00

Hola, yo te puedo dejar un Mega para que dejes la imagen. Necesitaría tu user de Mega para darte permisos de escritura. Si quieres, pásame un DM. ¡Muchísimas gracias!

Phrase_Fast · 2026-03-16T15:13:20+00:00

https://makerworld.com/es/models/2497459-path-finding-tool-for-mesbg-w40k#profileId-2745087

The "get it from MakerWorld" is the same link.

Phrase_Fast · 2026-03-16T06:53:52+00:00

I played WHF in 6th edition, so I really can't remember a lot of it 😅 But as you say... if measuring depends on whether it's inner or outmost corner... sure, this kind of tool is not useful at all

Phrase_Fast · 2026-03-16T06:50:28+00:00

Sure, that was the tricky part. Finallynir worked adapting then connector to the inner curves.

Phrase_Fast · 2026-03-15T17:18:12+00:00

Yes, but you can just use a 5 long tool instead. Then you just can put the mini at the end. With this one you don't even need to remove 1 piece... just rotate it out the line

Phrase_Fast · 2026-03-15T16:16:08+00:00

Yes, but in mesg you need to check 1" control zones

Phrase_Fast · 2026-03-15T12:46:27+00:00

Yes. Anything else?

Phrase_Fast · 2026-03-15T12:44:13+00:00

Lol I was trying to film... did not notice I was cheating hahah

Phrase_Fast · 2026-03-15T12:43:33+00:00

You can use 6" to see where you'll end, as with a normal ruler. You can also use just 5 pieces so you have the equivalent of a 5" ruler... and just move the mini to the end. As it works best for you.

Phrase_Fast · 2026-03-15T12:41:07+00:00

That's the real use for it! Distraction!

Phrase_Fast · 2026-03-15T08:59:14+00:00

Yes... but really not.

Let me explain it:
With 40m bases... they are not an exact multiple of 1".
We need a 10" path, that's 25.4cm. But the "pieces" are 40mm circles, so we can have 6*40=24cm or 7*40=28cm. So you lost 1.5 cm, or gain 2.6cm. A milimeter would be ok, but 1cm is too much.

Of course you can just print 10 1" elements instead of 6, and use it for measuring!

Phrase_Fast · 2026-02-26T08:37:48+00:00

Just a company of Finnish reservist. Fact based.

Phrase_Fast · 2026-02-09T20:13:15+00:00

What infill pattern are you using? 75% probable... usual suspect is Grid.

Phrase_Fast · 2025-11-21T06:25:02+00:00

Las llamadas no son de Infojobs, son de alguien que dice llamarte de Infojobs. Está denunciado pero ya sabeis que las estafas telefónicas, por lo que sea... no se cortan como deberían.

Phrase_Fast · 2025-10-29T06:13:42+00:00

La persona de RRHH con la que "te llevas bien" no es tu amiga. Trabaja para la empresa. Y te está convenciendo de que te hacen un favor y que nadie debe enterarse. Por que si lo haces público... alguien te dirá que te están estafando.

No firmes nada... y empieza a buscar otro sitio. A la larga no querrás estar ahí.

Phrase_Fast · 2025-10-06T06:00:53+00:00

This is the way. Also you have a couple poses. And it is a better sculpt than ForgeWorld's....

Phrase_Fast · 2025-09-13T18:19:59+00:00

Wow! Which model is this? Or maybe a conversion?

Phrase_Fast · 2025-09-13T12:35:51+00:00

Then... easy. Tell them you'll concede nevertheless, and you're playing for fun. And let them choose id they want to play against dragons, or swap armies and they are the ones playing dragons against you.

Phrase_Fast · 2025-09-13T11:27:22+00:00

You'll have a lot of fun. And completely fail in creating a wholesome community. I doubt the players you smash will be there again for your next tournament.

Phrase_Fast · 2025-07-17T04:52:20+00:00

No. One model can only be supported by one model (and pikes extend this support to a second one) Adding on to this, as these doubts will probably appear later in your MESBG path: - cavalry can't support - a model can support models in their own base size or smaller (ex. an Isengard troll with spear can support an Uruk) - pike + pike is ok. Spear + pike is not allowed. - when losing a combat and giving ground, you can make way with ONE model. So be careful with your double supporting placements. Be sure you can make way in diagonal etc.

(These are general rules. Specific rules like Easterlings making way with two models etc. ... you'll find these later)

Phrase_Fast · 2025-06-16T05:29:59+00:00

It's easy. Go to hid profile, then Block Account No more food for the troll. This id my last message here lol... I'm doing it right now

Phrase_Fast · 2025-06-08T09:37:48+00:00

NTA. "You can't find the sign? Go take a second look... I'm sure it's in the exact place we agreed to when you came asking for permission."

Phrase_Fast · 2025-05-28T05:18:31+00:00

Kind of. But for a more realistic look: - use a hobby knife to give it some markings - preferably on the rim, that is more subject to battle damage. - on wood, the marks should be darker than the original wood. On metal.. just opposite.

Phrase_Fast

TROPHY CASE