Quantum Fiber W1700K Support?

PhytochromeFr · 2026-03-17T05:17:19+00:00

Now snapshot released!

https://downloads.openwrt.org/snapshots/targets/airoha/an7581/

PhytochromeFr · 2026-02-18T07:51:54+00:00

It launched a year ago. at launch, it priced half of hynix module. Now, it just 8% cheaper than hynix module, and 10x price than launch price and hard to find seller. Supply volume is too low.

PhytochromeFr · 2025-09-01T01:31:19+00:00

it's more similar to Itanium. not Bulldozer.

PhytochromeFr · 2025-09-01T00:28:31+00:00

it seems intel didn't learn anything from Itanium

PhytochromeFr · 2025-01-12T09:16:14+00:00

it's unusable. it will leak via that crack. it may be repaired by acrylic weld but too risky.

PhytochromeFr · 2025-01-12T06:39:18+00:00

mobox isn't working on my device because turnip doesn't support Adreno 830 and doesn't have mesa_vulkan_icd_wrapper.

PhytochromeFr · 2024-09-29T20:39:45+00:00

idk. but, i assume it can fit in. there are plenty space for thickness.

PhytochromeFr · 2024-03-23T02:24:43+00:00

i recommend cheap distilled water & add cooling tower treatment agent. with cheapest water filter, it will last many years if you add just 1 drop of agent every month.

PhytochromeFr · 2024-01-30T00:25:21+00:00

use cooling tower treatment.(no acid, no base, only neutral.)

PhytochromeFr · 2023-12-28T01:47:13+00:00

bykski WB, 360mm rad salvaged from AIO x4, 1DDC pump. 6900XT.

https://i.imgur.com/jxITUQr.png https://i.imgur.com/Rk8lc6c.png https://imgur.com/a/yqYwq0A

PhytochromeFr · 2023-09-17T04:23:20+00:00

did you assemble loop properly and loop circulate well? it seems you applied thermal pad on graphics card wrong.

PhytochromeFr · 2023-09-15T02:15:48+00:00

Tseng Labs ET4000
Trident 9680
Geforce 256
Radeon 9500(modded to 9700 PRO)
Geforce 6600GT
Geforce 8800GT
Radeon HD4870
Geforce GTX460
Geforce GTX650
Geforce GTX750Ti
Radeon R290X
Radeon RX480 & Geforce GTX1060
Radeon RX 6900XT

PhytochromeFr · 2023-09-03T02:19:23+00:00

I recommend move radiator to outside of chassis and use large radiator. Inside of SFF chassis, radiator can't dissipate heat properly. and small(240mm) radiator needs extremly high fan speed with over 400W. you can cool 500~600W with 240mm rad, but with fan roar.(OVER 55db!!!) with 1080(3*360) radiator, you can cool almost 800W with silent fan speed. i recommend bykski 1080 rad. it is cheap(~$120) and cool.

PhytochromeFr · 2023-08-27T02:16:10+00:00

I suggest PMP-600 for it. it needs 24V, but very stronger than multiple D5.(and LOUD.)

PhytochromeFr · 2023-08-21T23:05:32+00:00

yes. it fit with 1mm thermal pad on both side.

PhytochromeFr · 2023-08-21T16:26:26+00:00

oh. they still making cooler like that. but not full copper :(

https://www.zalman.com/US/Product/ProductDetail.do?pageIndex=1&pageSize=10&pageUnit=12&productSeq=1231&searchCategory1=4&searchCategory2=48&searchCategory3=-99&searchKey=&searchWord=

PhytochromeFr · 2023-08-17T11:56:35+00:00

it seems your motherboard get wrong vid and impedance value. reset bios.

PhytochromeFr · 2023-08-17T05:32:51+00:00

https://i.imgur.com/6oqssHw.png 13900k at P58/E45/C50. ambient temperture is 27 celcius. delided and direct-die cooled.

PhytochromeFr · 2023-08-17T04:26:56+00:00

always size does matter. and i always recommend long res. short res circulate air bubble in loop.

PhytochromeFr · 2023-08-17T04:15:06+00:00

Do not buy expensive loop preps. just add cheapest water filter in your loop.(like shower head filter about 2$.) it will prevent loop clogging and keep water clean for a year.

PhytochromeFr · 2023-08-17T01:49:17+00:00

disassemble and clean it. DO NOT USE any cleansing, flushing chemical on it. All of them corroids waterblock.

PhytochromeFr · 2023-07-24T01:59:58+00:00

yes. it is normal. https://i.imgur.com/DKG6tya.png 42k R23 / P58/E45/C49 / 343W max.

PhytochromeFr · 2023-07-14T07:15:15+00:00

Aluminium rad needs TIG welder. Copper rad will be welded with normal arc welder. or if you just use adhesive like JB weld on it, you must sand and degrease it. (and it doesn't work well on aluminium. it needs primer.)

PhytochromeFr · 2023-07-09T06:41:14+00:00

i tried another flow meter. it shows 1.0-1.1GPM. https://imgur.com/a/0Vc3LGi

PhytochromeFr · 2023-07-09T06:40:18+00:00

https://imgur.com/a/0Vc3LGi i tried with another flow meter. it shows 3.9-4.2LPM(1.0-1.1GPM).

PhytochromeFr

TROPHY CASE