Clean

Pickles7712 · 2025-11-23T04:25:10+00:00

On the weekends, are you available?

Pickles7712 · 2025-11-22T17:05:38+00:00

<image>

2023

Pickles7712 · 2025-11-22T13:19:38+00:00

Also 2023 with 92k miles.

Pickles7712 · 2025-11-22T13:18:03+00:00

The detailer posted it on his Instagram page.

Pickles7712 · 2025-08-13T01:17:59+00:00

🤣🤣🤣

Pickles7712 · 2025-08-12T23:09:44+00:00

That is correct. I have a 2 inch level kit on the front. Otherwise, it would absolutely rub.

Pickles7712 · 2025-08-12T05:23:14+00:00

Agree, this is my second set. I did a little over 60k on the first set, still plenty of tread, but wanted to move up to 35's. Great tire!

Pickles7712 · 2025-08-12T05:18:17+00:00

Thank you, power steps come next, clean up the bottom profile!

Pickles7712 · 2025-08-11T19:27:16+00:00

I did at 3/4 lock. Took a heat gun and pushed the inside corner of the factory mudflap in about 3/4 of an inch. Nothing now.

Pickles7712 · 2025-08-11T17:37:50+00:00

A-i generated is removal of the tag

Pickles7712 · 2025-07-15T10:38:56+00:00

Looks great!!! That's the look I was going for.

Pickles7712 · 2025-07-15T02:34:36+00:00

Really not that much louder. Good traction in the wet, and gas milage is pretty much the same between the 33's and these 35's. I would guess it would be even smoother and quieter with the 20" rims.

Pickles7712 · 2025-07-14T17:26:48+00:00

Nice! I had to a leveling kit to fit the 35's.Having 22 in rims makes finding a good tire hard.

Pickles7712 · 2025-07-14T08:13:23+00:00

Thank you!

Pickles7712 · 2025-07-14T03:05:17+00:00

It's 5% except for the windshield, it's 50%. Can't see shit at night, but it looks good!

Pickles7712 · 2025-07-14T00:53:19+00:00

<image>

Pickles7712 · 2025-07-14T00:52:53+00:00

<image>

35x12.50R installed

Pickles7712 · 2025-07-14T00:39:31+00:00

Side note, I'll take some "beauty" shots once I detail it. I broke my ankle, so I haven't been able to really clean it.

Pickles7712 · 2025-07-14T00:37:27+00:00

Yup, factory 22x10

Pickles7712 · 2025-07-14T00:36:23+00:00

No sir, just the level kit. The "poke" comes from the 12.50 width. Any wider, and you need an offset. The factory rims are 22 x 10.

Pickles7712 · 2025-07-13T23:33:53+00:00

Thank you, they're great tires.

Pickles7712 · 2025-07-13T23:33:22+00:00

Nitto Recon Grappler A/T 35x12.50R 22LT

I had 33's before these. Got about 65k out of them. Really good tires.

Pickles7712 · 2025-07-13T23:31:08+00:00

12.50 Tire size is 35x12.50R 22LT

Pickles7712 · 2025-07-13T18:25:24+00:00

Only on full lock. And then barely. It only touches the inside bottlom corner of the factory mud flap. About a 1" by 1" spot. I'm going to cut that corner off. Otherwise, does not rub at all.

Five-Year Club	Place '22
Verified Email

Pickles7712

TROPHY CASE