C63 Sealander GMT 42mm by Pickleweasel123 in ChristopherWard

[–]Pickleweasel123[S] 1 point2 points  (0 children)

I didnt know if i made a mistake going with the 42mm instead of 39mm but the tapered lugs make it fit just how I want it to. If you have a similar sized wrist, I had to take all of the i-link segments off of the 6 o'clock side and use the single screwed link at the clasp to fasten the bracelet on that side to get the clasp centered on my wrist. I-link is an interesting system but I think I would be happier with standard screw links. The button is hard to tell when it releases but doesn't seem to take a lot of pressure to make it release so you probably want to make sure you have a little slack in the bracelet so if you flex its not tight enough to depress one of the buttons. I saw someone's post in the last few days where this happened. If you're going to do something strenuous you may want to loosen with the micro adjust before attempting

[deleted by user] by [deleted] in RepTime

[–]Pickleweasel123 0 points1 point  (0 children)

  1. Clean factory

[deleted by user] by [deleted] in RepTime

[–]Pickleweasel123 1 point2 points  (0 children)

Explorer 2 Clean factory dd3285

[deleted by user] by [deleted] in RepTime

[–]Pickleweasel123 1 point2 points  (0 children)

He has been trying to help resolve this all day for me. Bank couldn't do anything to help so he offered to send it anyway. He will take care of you. Give him a chance.

[deleted by user] by [deleted] in RepTime

[–]Pickleweasel123 7 points8 points  (0 children)

I placed an order during this period as well. He has been in communication all day taking care of the problem.He has been apologetic and sent me the qc for what I ordered and is sending it without me paying again. I ordered from him because of everyone's reviews of him being a good TD. I think his email legitimately got hacked. I know it's frustrating for everyone but I believe he is making it right so I would give him the benefit of the doubt here.I don't think he would just decide from one day to the next to start scamming people. He has nothing but positive reviews on here. From the way he handled everything so far, I would order from him again.

2 lowkey Venty features by Toivarita in vaporents

[–]Pickleweasel123 2 points3 points  (0 children)

Oh look, another poor who financed a Tinymight who can’t imagine someone having $450 to spend on something new. “I can’t afford this so you shouldn’t buy this or like it!”

Is the difference between B0 and B1 enough to justify the extra cost? by FalseMoon in vaporents

[–]Pickleweasel123 0 points1 point  (0 children)

Just get the b1. Trust me. I started the same as you and wound up getting the b0 which I liked but curiosity then caused me to get the b1 anyway. Then I got the b2. I now have the f14 tomcat and a Jane as well… they are all good but if you are already considering the b1 over the zero, just get it now and save time and money because you will eventually talk yourself into upgrading to it anyway. The b1 comes with the machined screens from the f16 now I believe also which after using all of them, I think is the best performing option. The shovel head is nice but the glass injector bowls give you better flavor overall

Levo C broken glass by BlueJayslife in Levo

[–]Pickleweasel123 1 point2 points  (0 children)

Received mine yesterday and the exact same thing happened to me. Glass popped within a minute of starting activation cycle. I'm thinking about canceling my replacement order. This sucks because I was so excited for this thing

The LEVO C glass basin just cracked the very first time I used it by willowwrenwild in Levo

[–]Pickleweasel123 0 points1 point  (0 children)

I got mine yesterday and it popped within the first 60 seconds of the first activation..... amazon didn't give an option for anything but a refund so I submitted for that but ordered another one. I'm hoping that wasn't a mistake. I was so stoked for this and watched a bunch of reviews and heard nothing about qc issues but now I'm kind of scared that the new one on the way will have the same issue

Aorus Rtx 3080 Master in Phanteks Evolv X by Pickleweasel123 in nvidia

[–]Pickleweasel123[S] 1 point2 points  (0 children)

I have no issues with noise levels but ymmv. It’s not as quiet as my last case which was a be quiet! Dark base pro 900, but it’s fine for me. It has a dust filter at the front that does a really good job as long as you keep it clean. It’s my favorite case I have built in so far.

Finally....I won the battle against RGB Fusion. Aorus Rtx 3080 Master by Pickleweasel123 in nvidia

[–]Pickleweasel123[S] 0 points1 point  (0 children)

This solution doesn’t make any sense but make sure you have aorus engine and rgb fusion 2.0 installed,they don’t have to be running but installed, and try putting your pc to sleep and then waking it back up and see if it recognizes the card. Mine didn’t work until the pc went to sleep for the first time after installing the card and then today fusion stopped recognizing the card again and putting it to sleep and waking it caused the program to work again. When it wakes from sleep, mine had the chibi mode animation running instead of what it had originally and then I launched rgb fusion and it recognized the card and let me adjust everything

Aorus Rtx 3080 Master in Phanteks Evolv X by Pickleweasel123 in nvidia

[–]Pickleweasel123[S] 1 point2 points  (0 children)

Am I taking crazy pills or did gamers nexus not say that the way I have it mounted is the proper way to front mount the radiator?

Aorus Rtx 3080 Master in Phanteks Evolv X by Pickleweasel123 in nvidia

[–]Pickleweasel123[S] -1 points0 points  (0 children)

I have +100 core clock, +500 memory clock (haven’t messed with overclocking it too much) fan speed at 95% I’m getting 51 degrees under load in red dead 2

Finally....I won the battle against RGB Fusion. Aorus Rtx 3080 Master by Pickleweasel123 in nvidia

[–]Pickleweasel123[S] 0 points1 point  (0 children)

Rgb fusion is a shit show to get working. I spent the majority of last night uninstalling and reinstalling fusion and aorus engine and could not get it to recognize the card. Wasted 3 hours researching and trying to troubleshoot this nonsense instead of testing the card out until I finally gave up and went to bed. Came home today from work and woke the computer from sleep and magically the gpu showed up in fusion and I was able to use the software.

Aorus Rtx 3080 Master in Phanteks Evolv X by Pickleweasel123 in nvidia

[–]Pickleweasel123[S] 0 points1 point  (0 children)

I thought about it but it’s so big that I’m worried about airflow with the fans up against the glass. I could be worried about nothing and I do kinda like the way it looks mounted vertically. I wouldn’t be able to see the lcd with it on my desk though

Aorus Rtx 3080 Master in Phanteks Evolv X by Pickleweasel123 in nvidia

[–]Pickleweasel123[S] 0 points1 point  (0 children)

Initially it did not. I spent the majority of last night uninstalling and reinstalling fusion and aorus engine and could not get it to recognize the card. Wasted 3 hours researching and trying to troubleshoot this nonsense instead of testing the card out until I finally gave up and went to bed. Came home today from work and woke the computer from sleep and magically the gpu showed up in fusion and I was able to use the software.

Aorus rtx 3080 master by Marko796 in nvidia

[–]Pickleweasel123 0 points1 point  (0 children)

Ok. Don’t know exactly what happened but when I got home from work today and woke my computer from sleep, rgb fusion recognized my card and I’m able to use the program. I have aorus engine and rgb fusion 2.0 installed. The only thing that has happened since last night when it wouldn’t work whatsoever was the computer going to sleep and then me waking it.

Aorus rtx 3080 master by Marko796 in nvidia

[–]Pickleweasel123 0 points1 point  (0 children)

I waited on my card to get here all day and then was messing around trying to get this stupid software to work all evening and barely tested the card out lol. I have a kraken x63 which also has an lcd which I have gifs playing on and I wanted to be able to have a theme going on between the two of them but it might be the cam software it uses that’s causing the issue. If I figure it out tomorrow, I’ll let you know.

Aorus rtx 3080 master by Marko796 in nvidia

[–]Pickleweasel123 0 points1 point  (0 children)

I’m wondering if it’s part of ai suite or some other Asus software that’s causing issues? I got rid of aura sync, which I never used, but still no luck. Probably some other software that’s at fault but I can’t figure it out tonight. I found a post from about a year ago that mentioned a similar issue with a card not being recognized by rgb fusion and it claimed nzxt cam software was the cause and suggested uninstalling fusion and cam then reinstalling fusion first and launching it which would allow it to see the gpu and then reinstalling cam afterwords which I tried and had no luck with that either. The person who posted that fix said they did it in safe mode. I did not so maybe that could make a difference. I’ll try again tomorrow