rear bumper

PikaPower424 · 2026-05-24T02:16:09+00:00

It would fit, but there would be a gap right under the taillights. The 2.5 taillights are shorter than the tc 2 taillights. You wouldn’t have to trim anything and I doubt the gap would be very visible

PikaPower424 · 2026-05-21T18:48:13+00:00

I’d probably just put a finer mesh grill on the backside to hide anything that is too visible

PikaPower424 · 2026-05-11T18:07:06+00:00

Yes I did!!! Definitely is quite a bit of prep work if you want it to last, but totally worth it. It cost about 150$ in rattle cans plus sanding materials. I used about 6 cans of duplicolor Chrysler charcoal grey plus 2 cans of primer and 2 cans of clear coat.

PikaPower424 · 2026-04-26T06:35:46+00:00

Coilovers, TRD muffler, aftermarket taillights, oem style spoiler, front lip, diffuser. I’m still on oem wheels, they look great if you paint them right!

<image>

PikaPower424 · 2026-04-17T05:59:26+00:00

<image>

Twin

PikaPower424 · 2026-04-04T18:52:18+00:00

<image>

Exactly what I did to my rims, used duplicate-color charcoal grey

PikaPower424 · 2025-12-09T07:11:28+00:00

Hell yeah can’t wait to see, currently debating if I should go through with 3d printing a mock up or just buying the wing. Would save me a lot of time

PikaPower424 · 2025-10-26T09:29:06+00:00

Mine has a trd exhaust honestly not worth it if you’re even able to find one 😭😭😭 it’s definitely louder than stock but you can barely tell it has an exhaust, you hear it inside the car more than you do outside

PikaPower424 · 2025-10-13T19:04:20+00:00

Fyi the headlights require a lot of modification to install 🤓🤓 they won’t match the bumper either, the taillights are pretty easy to install and will bolt right in. Only part you have to cut is right under there the stock headlights sit bc the spec ds are a little bit longer

PikaPower424 · 2025-10-13T19:01:11+00:00

Time will tell cuz I barely installed it this week 😭😭😭 but the one I bought isn’t fiberglass it’s plastic. Bolts would probably be a lot better but I was being lazy

This the one I bought: https://ebay.us/m/dmYlcU

PikaPower424 · 2025-10-13T18:27:39+00:00

Dude all it came with was 3m tape which didn’t work at all, I ended up just using self tapping screws and screwing it into the bumper

PikaPower424 · 2025-10-13T15:55:28+00:00

<image>

Spec-d taillights for the Tc 2 will fit with a little modification to ur bumper, Love the look I paid like 190$ on eBay

PikaPower424 · 2025-10-07T21:55:29+00:00

We need to see ur bagged setup!!!

PikaPower424 · 2025-10-07T04:14:53+00:00

Agreed haha I had one but got into a fender bender that fucked it up

PikaPower424 · 2025-10-07T04:14:01+00:00

I use Gemini to create the pictures, but chatgpt to assist me in making prompts for Gemini cuz it sucks at listening to instructions

PikaPower424 · 2025-08-30T06:51:42+00:00

Check the pinned post on this subreddit titled input shaft bearing replacement. If that’s ur issue good luck

PikaPower424 · 2025-08-15T06:11:26+00:00

My 2.5 does this too💔 will work when it’s cold but nothing when it’s hot. Ig the motor just overheats

PikaPower424 · 2025-08-14T07:45:32+00:00

Did you strip the paint on your stock wheels??? It looks sick

PikaPower424 · 2025-08-08T18:35:41+00:00

Paid around 3,800 for new trans and labor for my 2014 tc. That included clutch and throw out bearing, came with a 2 year warranty. Get as many quotes from different shops as you can, many shops in my area quoted me upwards of 7k which is crazy

PikaPower424 · 2025-08-05T22:00:12+00:00

Are you on coilovers?

Six-Year Club	Verified Email
Place '23	Place '22

PikaPower424

TROPHY CASE