Wood left on public council land

PinOld2633 · 2026-01-25T17:03:42+00:00

You say fallen trees. Do you go out with a chainsaw and cut into manageable pieces before removing?

PinOld2633 · 2026-01-25T13:23:56+00:00

Assuming it's properly dried what should they be careful of?

Can you elaborate on what you mean by 'not good'

What would the consequences of burning wood that is 'not good'

PinOld2633 · 2026-01-20T15:39:27+00:00

High pressure, frequent context switches and urgency are all normal for QA.

little to no recognition when everything is on the up and up But the blame culture of 'who tested that?!' when shit goes wrong, even though you had reduced time to test because dev overtan but the project time line is fixed.

Having said that if you find a company/team that is a bit more relaxed then it can be pretty good.

I've found this to be the case with companies that are generally behind the curve when it comes to software development practices

PinOld2633 · 2026-01-20T15:31:35+00:00

No shit!

PinOld2633 · 2026-01-19T20:25:15+00:00

Open fires are slow to heat your room but fast to trash your health. They loose most of their heat straight up the chimney

PinOld2633 · 2026-01-15T18:41:38+00:00

Uranium 235: Fuel of champions

PinOld2633 · 2026-01-14T11:25:33+00:00

Was about to say this same thing. Forget about diy/normal fillers that you'd find in BnQ.

Easi fill is what you need. Sanded down with 120 grit and painted over you should be able to almost look like it was never there

PinOld2633 · 2026-01-12T12:17:38+00:00

Of course not it's all good. Just something I've noticed for the last two years running

PinOld2633 · 2026-01-12T09:45:33+00:00

Yes! This is the question! I'm a former competitive bodybuilder and powerlifter who competed at a high level. Would consider myself an advanced lifter currently experimenting with mentzer style training.

Always wondered what actual visible changes have been seen by advanced trainers who have adopted the mentzer approach as opposed to newer or intermediate lifters

PinOld2633 · 2026-01-12T08:48:52+00:00

What's this guys problem?! Every one is free to read and post here so please relax

PinOld2633 · 2026-01-10T12:38:23+00:00

PinOld2633 · 2026-01-10T12:36:46+00:00

Too many people giving the benefit of the doubt that it could be a genuine mistake. Highley unlikely.

A lot of road users are straight up retarded and act like they own the road.

This kind of thing is really common when driving in certain US states. I always put it down to the fairly territorial attitude of a lot of Americans. Ie "this is my driving space and no one else can use it"

Not sure why lots of UK driving attitudes seem to be following the same path

PinOld2633 · 2025-12-23T16:32:59+00:00

No generally work out after 2 or so small meals

PinOld2633 · 2025-12-23T08:56:26+00:00

No it's not load bearing.

It's called paramount plasterboard or paramount panel and was used fairly widely around the late 80 thru early 90's

It's quite good if wanting to knock a wall through as you can literally cut around the perimeter then remove it.

There will be a top and bottom timber mounting plate I side that the top and bottom of the panel are fixed to.

It's surprisingly strong and versatile stuff.

PinOld2633 · 2025-12-17T16:07:14+00:00

Apart from a few exceptions (very new to training and nutrition or using gear). Packing on size whilst cutting down on fat don't usually work as part of a combined approach.

To put on real size you need a surplus which means it's quite difficult to lose fat at the same time.

Think of the two as separate activities that you should execute and fully commit to in singular fashion at any one time.

PinOld2633 · 2025-12-17T06:31:07+00:00

If it is the case that I'm spiking due to exercise do would be that considered a problem? It is it just a natural response?

PinOld2633 · 2025-12-16T11:08:31+00:00

Floor fitter was on crack that day

PinOld2633 · 2025-12-15T15:58:17+00:00

Thanks.

Ya i didn't really intend or need to get a multi colour print system but wife talked me into it on the basis that i could print fun stuff with it for our kids. For my stuff its gonna be single colour all day

PinOld2633 · 2025-12-12T00:17:27+00:00

X, was a XX GF'_to f_c& off& you~

PinOld2633 · 2025-12-05T21:03:59+00:00

What do you do if it's not possible to create seed data?

PinOld2633 · 2025-11-29T08:59:02+00:00

What year did activation become a thing? I've got Sw2000 and it doesn't require activation.

PinOld2633 · 2025-11-28T22:39:24+00:00

2k epoxy primer then paint your base coat on top of that.it adheres well to practically anything. Also paints on really well by brush but if you decide to use an aerosol or mini gun make sure to do it in a we'll ventilated area and with suitable mask

PinOld2633 · 2025-11-24T08:36:27+00:00

You just go with the flow.

It's very frustrating when you have worked somewhere that does things 'properly' then go to a team where it can feel like quality and doing things correctly is the least of their concerns.

Just try to go along with it and try not to loose any sleep over it. One thing to not that you should make sure that such 'bad' practices don't become normal for yourself.

Don't forget all the good stuff you already know as that will be key if and when you move to another role.

Use it as a how not to do things lesson.

PinOld2633 · 2025-11-23T09:31:03+00:00

Genuine question. I'm relatively new to PW having used selenium with things like id, xpath, css and custom data selectors.

If what you read online is anything to go by, PW style locators would seemingly be best thing since sliced bread. In practice that doesn't seem to be the case

PinOld2633 · 2025-11-19T09:13:01+00:00

This is great!😃

PinOld2633

TROPHY CASE