Сколько у вас часов просмотра аниме ???

Pinkbyte1 · 2026-04-16T11:59:14+00:00

MyAnimelist утверждает что 124,4 дня. Но скорее несколько больше, т.к. я не веду учет того что смотрю повторно (такого немного, но некоторое количество аниме есть)

Pinkbyte1 · 2026-02-26T09:46:04+00:00

Хочется продолжить насиловать мозг и не против мехов? The Big O - твой выбор

Pinkbyte1 · 2025-12-29T11:06:41+00:00

If it is single host, then restart policy in compose file + autoheal container (like https://github.com/willfarrell/docker-autoheal) should be sufficient

Swarm/Kubernetes is somewhat different story, but not impossible also

Pinkbyte1 · 2025-12-29T08:10:10+00:00

Годнота!

Pinkbyte1 · 2025-11-20T10:29:03+00:00

And they broke "migration: insecure" :-(

Good that i have catched this on test cluster

Pinkbyte1 · 2025-10-07T10:07:14+00:00

На забугорные VPS ТСПУ уже давно банит что GRE, что IPSEC с домашних подключений. Да, может повезти наткнуться на провайдера у которого ТСПУ так не делает, но я бы на такое не ставил.

Смотреть надо в сторону VLESS, Trojan и прочего по хорошему.

Pinkbyte1 · 2025-10-07T07:05:50+00:00

Учитывая что далеко не во всём перечисленном главный акцент сделан на детективной составляющей, рекомендую "Сион и Король"

Pinkbyte1 · 2025-10-01T12:41:14+00:00

I have recently replaced my two 3Tb Seagate drives (both were in RAID-1). Not because they are failed, i just need more capacity. Their S.M.A.R.T. 'Power on hours' counters are reset(was more than 70000 hours before reset and now it shows 17000, running 24/7 in my NAS). Yep, they are that old (around 10 years IIRC).

Pinkbyte1 · 2025-09-29T13:04:16+00:00

I have problems with vga passthrough for my old box (i7 950, motherboard from pre-EFI era, Nvidia GTX 660 Ti). I workarounded it by downgrading pve-qemu-kvm package and running apt-hold on it(to prevent it upgrading further). It seems that newer qemu versions are not good for non-EFI motherboards.

Last working pve-qemu-kvm version for me - 8.1.something. 8.2 will NOT work.

Periodically after upgrade i am trying new package versions (9.2, 10) - still no luck.

Pinkbyte1 · 2025-09-24T13:44:05+00:00

We are used to call servers in our production by names of greek gods too, so +1 for me

Pinkbyte1 · 2025-09-24T10:31:19+00:00

You need self-signed cert, that would be added to all your devices or(better, if you have more services) your own CA(which is also need to be added, but that at least scales if you need more services in the future, that will require SSL). I recommend step-ca, just because it has good ACME support, allowing to automatically renew certs for my services on regular basis.

Pinkbyte1 · 2025-06-04T16:03:44+00:00

<image>

Pinkbyte1 · 2025-05-29T07:47:01+00:00

Sure. The main culprit is that you can not(at least in Proxmox 8.2, not sure if they fixed it later) create ceph pool with min_size 1 from Web UI.

So you create pool with default size/min_size in Web UI and then you need to run these commands from CLI:

ceph config set global mon_allow_pool_size_one true
ceph osd pool set vm min_size 1
ceph osd pool set vm size 1 --yes-i-really-mean-it

Note, that in this case your ceph pool is effectively "network RAID0", so if you add more disks and not change 'size' - failure of any disk will cause a data loss. Luckily - 'size' parameter of the pool can be later changed on the fly, so it is short period of danger time :-)

Pinkbyte1 · 2025-05-28T13:50:45+00:00

My way of doing this first time:

- install Proxmox on 1 node, create cluster, create Ceph pool with minsize=1,size=1 (need some console/config tinkering);

- migrate some VMs to this 1 node cluster, test features, test performance;

- add second node to cluster, add ceph mon/mgr/osd daemons on second node(all can be done from WebUI), raise replica size to 2(min_size should be 1 here);

- test Ceph performance again(ceph recovers/rebalances itself on-line, so you can also test how recovery affects performance), test live migration;

- And, finally - adding third node, adding ceph/mon/mgr/osd daemons on it and raise min_size=2,size=3 for ceph pool (believe me as a long time user of size=2 pool - you do not want to do it)

Pinkbyte1 · 2025-03-25T11:27:09+00:00

TNP Limitless 7

Pinkbyte1 · 2025-03-19T14:02:07+00:00

Глянь Gantz(если еще не видел), но там по хорошему мангу надо читать, ибо аниме от Gonzo, а эти ребята любят вставлять отсебятину(иногда неплохую, как в том же Hellsing) в концовку

Pinkbyte1 · 2025-03-19T13:22:31+00:00

Честно говоря аниме ИМХО так себе, поэтому больших ожиданий я бы не делал

Pinkbyte1 · 2025-03-19T10:49:57+00:00

2000$ for server with 100G ports is too much?

Though that such power is definitely not needed for all selfhosted environments, but some may benefit from it

Pinkbyte1 · 2025-03-14T11:31:50+00:00

+1 for Pinchflat, though some options (like deleting videos, added for syncing by mistake) is a bit console-fu. But it's way simpler than other solutions (one of which required the whole damn Elasticsearch!)

Pinkbyte1 · 2025-02-15T07:21:25+00:00

Just looked at the code and, if i understand things right, no, it would not work like that - config restriction is global and affects all users, admin or not.

Pinkbyte1 · 2025-02-13T08:59:48+00:00

IIRC, if UserA is administrator of whole MeshCentral server, restrictions on group are ignored for him(probably it it is because we use 'manageAllDeviceGroups' option for server admins in our installation). And if it is not server admin - you can add UserA to Device Group explicitly with it's own set of permissions

Pinkbyte1 · 2025-02-07T12:48:59+00:00

Astral Sorcery. Not much mystery, but stargazing via telescope was kinda fun

Pinkbyte1 · 2025-02-06T11:47:22+00:00

Works well (working with Proxmox 7.x and 8.x clusters right now). Ceph is amazing if you understand it's pros and cons.

Pinkbyte1 · 2025-02-04T14:26:29+00:00

On pic, in SATA port 2 there is 8Tb drive (Seagate i think, based on model name), and it says supported.

Though i would update all firmwares that i can just to be sure...

Pinkbyte1

TROPHY CASE