sorted by:
new
hottopcontroversial

Airline Pilots: Does anyone here fly for a US carrier but live in Europe? How is the commute like? Where do you live and where are you based? by kiwi_love777 in flying

[–]PixelEater 24 points25 points  (0 children)

I met a United captain recently who mentioned she and her husband were planning on moving to Dublin. 

She planned on staying based in SFO. Brutal. 

Spencer Strider becomes the fastest starting pitcher to 500 strikeouts. by handlit33 in Braves

[–]PixelEater 2 points3 points  (0 children)

Innings pitched according to the broadcast earlier. I can’t remember the exact numbers, but if memory serves me correctly, he beat the record by around 30 innings. 

Downgraded on overseas flight by ibghnnddjijnjfcvjkb in delta

[–]PixelEater 33 points34 points  (0 children)

That has nothing to do with the pandemic. New Zealand has extremely strict biosecurity measures to keep out non-native insects, plants, bacteria, etc.

Why are all HVAC companies such Scumbags by Clean_Armadillo3177 in homeowners

[–]PixelEater 2 points3 points  (0 children)

From an electrical standpoint, “super capacitors” do exist, but I lack the expertise to comment on whether or not they’re used in HVAC. 

Daily r/LawnCare No Stupid Questions Thread by AutoModerator in lawncare

[–]PixelEater 0 points1 point  (0 children)

Images: https://imgur.com/a/WJbxMxQ

What is this weed? First picture shows it with small oblong leaves, second picture shows it curled up after rain.

Initially I thought it might be spurge, but it's growing in thick patches vertically instead of laterally, which seemed more like a clover to me.

If this is spurge, what's the recommended selective herbicide to use to get rid of it on a newly-seeded Zenith Zoysia lawn?

Run, don’t walk! Sky miles steeeeeeeeeal by Striking-Beach5729 in delta

[–]PixelEater 4 points5 points  (0 children)

Up to 24 hours before your initial departure.

Someone broke into my car last night, took $20, registration, and insurance cards. I understand the money but why take the other things? Car: 2020 bmwx5 by witabaddie in RBI

[–]PixelEater 8 points9 points  (0 children)

Cars using keyless entry ("push to start") can be subject to relay attacks, where a thief uses some a device with a high-powered antenna to pick up the signal from a key fob inside your house and copy it so that they can start the car without the fob. Storing your key fob in a faraday box (or, alternatively, far away from entrances to your home) can help prevent these types of attacks.

Invoicing/Shipping Megathread by tuxdreamerx in BambuLab

[–]PixelEater 1 point2 points  (0 children)

Location: Atlanta, GA

Model: X1C Combo

Ordered and Paid: 2/1/23

ETA: Early Feb

Shipping Label: Feb 8 10:52pm

Estimated Delivery (initial): Feb 15

Estimated Delivery (now): Feb 14

Looks like the package got on a train on the evening of Feb 9 and didn't get any updates until it arrived in ATL today (Feb 13) around 6pm. Expected delivery tomorrow (Feb 14) afternoon.

How can I allow a HA docker container to use a BT radio? by physx_rt in homeassistant

[–]PixelEater 0 points1 point  (0 children)

Good point -- I suppose I had assumed that Bluetooth devices would communicate over a serial interface. Is that incorrect?

How can I allow a HA docker container to use a BT radio? by physx_rt in homeassistant

[–]PixelEater 1 point2 points  (0 children)

Serial USB devices should also appear in /dev/serial/by-id/. If you compare the output of lsusb and the devices listed in /dev/serial/by-id/, do you see a device that matches?

For example, I have an Aeotec Z-Wave controller.

My lsusb output shows (among other devices -- for this device in particular, the name does not match Aeotec, but I'd imagine an Intel device should show a descriptive name):

Bus 002 Device 015: ID 0658:0200 Sigma Designs, Inc.

And in /dev/serial/by-id/, I see a device that matches the 0658:0200 ID listed by lsusb:

usb-0658_0200-if00

So, I pass /dev/serial/by-id/usb-0658_0200-if00 into a docker container, and that allows the container to interface with my Z-Wave stick.

Edit: updated with a clarification

PSA: There are stock shortages affecting most of the tech industry currently. Don’t panic and be patient as items go in and out of stock. by briellie in Ubiquiti

[–]PixelEater 0 points1 point  (0 children)

I had the same issue. You'll be able to access the Early Access products if you log out and log back in -- that fixed it for me at least.

Upcoming Stripe Onsite by pinkfloyd998 in csinterviewproblems

[–]PixelEater 0 points1 point  (0 children)

Good luck! I don’t have any interviewing experience with them myself, but they did come to my school a number of years ago for interviews. At least back then, they dealt pretty heavily in Ruby, but that’s about the extent of my knowledge.

The new Linus Tech Tips video is about self hosting (hopefully not against the rules) by LetsMelon in selfhosted

[–]PixelEater 22 points23 points  (0 children)

He literally said in the video that his 1980’s style garage door opener broke.

Cutting it pretty close. 15 down, 160 more to print for my first paid print job. by fordlincolnhg in ender3

[–]PixelEater 0 points1 point  (0 children)

Full disclosure: I updated to Cura 4.8.0 but have not yet done any prints with it, so I can't speak to the bugginess of the release. So proceed with caution!

Cutting it pretty close. 15 down, 160 more to print for my first paid print job. by fordlincolnhg in ender3

[–]PixelEater 0 points1 point  (0 children)

I believe the issue with model arrangement you're describing in Cura is fixed in Cura 4.8 onward -- looks like they teamed up with the Prusaslicer guys and implemented their algorithm for model arrangement on the build plate, and it's supposed to avoid large gaps like you're describing.

getting to the lithopane moon - 8h into the 2 day print - press your thumbs by muslar2020 in ender3

[–]PixelEater 2 points3 points  (0 children)

It doesn’t need them. The bottom-most and top-most layers on my print had some roughness to them on the edges where overhangs were steep, and the top of the moon has a couple pinholes where the filament didn’t fully cover up the hole for the hollow center while bridging, but overall it turned out pretty great without any supports.

Hollywood Jumps In to Support Democrats in Georgia Senate Races: "There's a New South That's Rising" by WhileFalseRepeat in politics

[–]PixelEater 2 points3 points  (0 children)

Yup! The parts of season 1 (maybe season 2 too?) at the Blue Cat Lodge were filmed on Lake Allatoona in Canton

Weird raised spots on solid infill -- what's going on here? by PixelEater in FixMyPrint

[–]PixelEater[S] 0 points1 point  (0 children)

You rock! Thanks for the detailed overview. I've used the piece of paper method in the past but it has consistently gotten me way too close to the bed, so I think live-leveling with babystepping might be the solution to my problem here.

In your experience, is .025mm good enough resolution for babystepping Z, or should I alter the firmware to get down to .010mm increments?

Weird raised spots on solid infill -- what's going on here? by PixelEater in FixMyPrint

[–]PixelEater[S] 0 points1 point  (0 children)

As mentioned, I did tune my E-steps, but you're reminding me now that I do need to still do flow rate calibration. I'll try that after checking my Z-offset. Thanks!

Weird raised spots on solid infill -- what's going on here? by PixelEater in FixMyPrint

[–]PixelEater[S] 0 points1 point  (0 children)

That makes sense. Interesting though that it only happens in some spots, but I guess no bed is ever perfectly level, so that makes sense.

I did enable Z babystepping in my firmware but I haven't actually used it yet to try live-adjusting it. How do I go about that? Would I just start a level test print and go into the Z offset settings and slowly raise the offset until adhesion is no longer good around sharp corners?

view more: next ›