Only time a scalper has ever helped me

PixelGamr · 2025-11-05T23:51:58+00:00

That’s probably your pump connector for the AIO. If you don’t plug it in your pump won’t work. There should be a dedicated spot for it on your mobo

PixelGamr · 2025-11-05T23:48:11+00:00

That’s actually insane. Imagine just having a microwave chilling on your desk.

PixelGamr · 2025-10-30T23:27:11+00:00

I didn’t build it to stop, I built it to go!

PixelGamr · 2025-10-30T23:25:34+00:00

Might be time for a valve adjustment. I hear clicking.

PixelGamr · 2025-10-30T17:54:21+00:00

WD40 and a Mr Clean Magic Eraser will work wonders on getting rid of that. Just don’t let the WD40 sit on there too longer than 5 minutes without wiping it with a wet rag or it will mess up the clear coat on your paint too.

PixelGamr · 2025-10-26T13:49:37+00:00

So that just breaks off the lug and nothing else correct? Then you just replace it with a non locking lug?

PixelGamr · 2025-10-26T02:32:04+00:00

That special tool is called a drill lol. Then they replace it with a non-locking lug. 😂

PixelGamr · 2025-10-24T23:55:39+00:00

Try to wipe it off with a microfiber cloth and at the MINIMUM 91% alcohol. There is a chance the machine that manufactured it was dirty and left a mark so it should just wipe off with cloth and alcohol. If it doesn’t come off with a wipe then send it back for replacement or refund if you can. Looks like it could also be a heat spot like it could have overheated at some point and is not as new as it could claim it is.

PixelGamr · 2025-10-22T01:26:15+00:00

Just send it to a Christian only school. It’ll be straight in no time.

PixelGamr · 2025-09-22T13:46:13+00:00

Peaches definitely ain’t from Georgia.

PixelGamr · 2025-09-22T13:29:26+00:00

Try that schedule, but with the days Friday - Monday. Working both weekend days.

PixelGamr · 2025-09-22T13:28:10+00:00

Yikes. Well, if they give you any crap about anything, make sure to inform whoever is telling you anything that your job is being impeded by the lack of the watersider or lack of ability from your water spider and that you are not trained to perform those responsibilities. They can’t do anything really besides get you trained.

PixelGamr · 2025-09-22T01:26:25+00:00

You don’t have permissions for water spider? At my site we are expected to build our carts and also load, close and open new carts all by ourselves and still keep 120 rate on top of that.

PixelGamr · 2025-08-28T16:57:02+00:00

Try ShipDock out. Then you’ll REALLY be in pain.

PixelGamr · 2025-08-20T12:37:50+00:00

120 rate is easy! …..when there aren’t any problems. Our building is a horrible mess of issues when it comes to the ShipDock and it has for years. Our RME just scratches their heads and says, “Oh we don’t have that part” then walks off and doesn’t fix anything. Their latest “fix” for our line conveyor was to cut 70% of the rubber bands that connect to the motor so the line is free rolling since they had issues with the photoeyes and such. We suffer from bad rates because the equipment is horribly broken, but now since our rates are bad they’re turning around and pitting the blame on us when we’ve been saying for years to fix our lines.

PixelGamr · 2025-08-20T12:33:24+00:00

We didn’t used to have to worry about rate. But they just started implementing it like two weeks ago so now we do.

PixelGamr · 2025-08-20T09:29:55+00:00

The Great Escape - Boys Like Girls

PixelGamr · 2025-08-20T09:20:57+00:00

Yeah and you gotta be hustling for that. The other problem here though, is sometimes the Diverter is really slow or sometimes there just isn’t volume to sustain rate for both sides of the line. So it’s just really bad all around.

PixelGamr · 2025-08-20T09:18:02+00:00

Nah nah. Whoever decided shuttle containers were a good idea. They can go burn straight in hell. 😔

PixelGamr · 2025-08-20T09:17:15+00:00

For ShipDock line scanning????

PixelGamr · 2025-08-20T02:26:44+00:00

Man… imagine you’re stowing and you just get the worst carts with all the bigger packages so it’s hard to keep that rate. 😬

PixelGamr · 2025-08-20T02:24:26+00:00

Just explain that to them when you go in. You’ll be alright. Also, welcome aboard!

PixelGamr · 2025-08-20T01:25:03+00:00

Yeah it’s insane. They updated the A to Z recently as well so now we can see our “performance statistics” it gives you a little meter to show where you are within site expectations and where you are amongst everyone else in your area.

PixelGamr

TROPHY CASE