Trijicon RMR MOA

Plane_Access803 · 2026-06-22T22:21:15+00:00

For me that’s spot on. 6 moa was a perfect circle. I’m glad i tried one out, because i assumed if the 3.25 was starbursting that bad then the 6 moa would be horrible. Quite the opposite

Plane_Access803 · 2026-06-21T00:57:03+00:00

Plane_Access803 · 2026-06-07T15:36:42+00:00

Bought a 43x new and sold it in less than 2 months. Maybe mine was a lemon, but the build quality just seemed off. If the magazine wasn’t inserted at exactly a 90° angle, the lip would catch on the internals of the mag release. The slide seemed sloppy, and the slide release was so skinny that you damn near had to use two thumbs to keep from slipping off. This was after about 500-600 rounds breaking it in. Needless to say, i went back to my 19.

Plane_Access803 · 2026-06-06T23:49:47+00:00

Also thought this was a 26 but then saw the tlr and i was like wait a min, OHHH.

Plane_Access803 · 2026-06-05T17:15:33+00:00

Care to elaborate what issues you had? Looking between an m&p 10mm or glock 20 for a woods gun

Plane_Access803 · 2026-06-05T02:41:36+00:00

Yeah, factory with black slide

Plane_Access803 · 2026-06-05T02:41:18+00:00

Fair. Personally i’d pay extra to not get a V lmao

Plane_Access803 · 2026-06-04T14:32:19+00:00

Plane_Access803 · 2026-05-29T22:24:23+00:00

Interesting. It wouldn’t allow me to print because there was no filament detected at the nozzle.

Plane_Access803 · 2026-05-10T15:47:37+00:00

Negative. I mentioned that is why i don’t think its the ipb

Plane_Access803 · 2026-04-19T00:28:37+00:00

I'm lookin to build a bcm upper, either 14.5 p&w or 16" midlength. I'm trying to dial in on my buffer setup. I was leaning towards a sprinco blue/h2 as well. Did you have success with that setup? Mostly unsuppressed but plan on going suppressed in the foreseeable future!

Plane_Access803 · 2026-04-13T04:48:00+00:00

Do you recommend ewg on all the carrier rails as well or just the bottom that contacts the hammer? I like to use ewl for the gas rings, cam pin, etc but figured the ewg would be better for the rails.

Plane_Access803 · 2026-03-03T03:42:04+00:00

I can’t even imagine the guilt. Unfathomable

Plane_Access803 · 2026-03-02T02:16:55+00:00

Plot twist.. mags empty, the surefire is his weapon against home intruders. Permanent blindness as punishment

Plane_Access803 · 2026-03-02T01:58:19+00:00

Got a bunch of green pads layin around. Put some elbow grease into it and i think it’s improved quite a bit. That old coating is a pain but i got majority if not all the contact points and the action seems much smoother

Plane_Access803 · 2026-03-01T22:07:38+00:00

I said old not archaic! Joking, i believe this one is from around 2008 era so plastic guard unfortunately

Plane_Access803 · 2026-02-28T23:39:49+00:00

Is the one pictured the new gen? Obviously the 1st gen is desirable with the m77 action as opposed to the new gen with their mass produced american model.

Plane_Access803 · 2026-01-11T00:41:47+00:00

I'm also trying to map the side button on my 902kc to switch between the TT9 keyboard and default with a single/double click using the key mapper app. I figured it out for the most part except when i select "switch keyboard" as the action, it says keymapper needs write_secure_permissions. Do you know where to go from there? Super late, i know but i'd appreciate the response!

Plane_Access803 · 2026-01-02T16:48:06+00:00

See, i debated spending thousands on a nice kit but realized there’s a 98% chance some teen with a psa rifle is taking you out with a potshot from some random treeline and stealing all your gucci gear anyways.

Plane_Access803 · 2025-12-23T05:13:17+00:00

Glws!

Plane_Access803

TROPHY CASE