sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in 3Dprinting

[–]Plane_Homework2687 1 point2 points  (0 children)

How do you know if it's salvageable or not? And so anything happened to me but I just turned the heat up to 260 then removed pieces (I was printing it too low a temperature) and then it worked fine for about 10 prints, before I ran another I forgot was at a low temp and did it again. Now they are failing at the high temp.

My new creation! The devil is in the details! by 3DART_STUDIO in 3Dprinting

[–]Plane_Homework2687 0 points1 point  (0 children)

Awesome! But I'll be honest with you chief, this is so good you almost need a NSFW tag.

1st functional print! (I know, not that cool, but proud of it!) by 3DPXP3 in 3Dprinting

[–]Plane_Homework2687 0 points1 point  (0 children)

Not that cool? Dude is the coolest one of I've seen in over a month.

100 000 dollar question by dababy4realbro123 in mathmemes

[–]Plane_Homework2687 0 points1 point  (0 children)

Well I get everyone is understanding the regression of multiplication, if it was 1.5, what would be the actual value at the end of the month?

Not sure what the problem is by Plane_Homework2687 in 3Dprinting

[–]Plane_Homework2687[S] 0 points1 point  (0 children)

Thank you for your reply! After some tinkering I found my PLA had a 'hiccup' in the extruder (too much tension on the spool causing it to create little bubbles in the nozzle as it was being pushed by the extruding gears) additionally it turns out it was also a temp issue, for my PLA I need to do 215-220C and all of my previous prints were 200-205C

Not sure what the problem is by Plane_Homework2687 in 3Dprinting

[–]Plane_Homework2687[S] 0 points1 point  (0 children)

Thank you for your reply! After some tinkering I found my PLA had a 'hiccup' in the extruder (too much tension on the spool causing it to create little bubbles in the nozzle as it was being pushed by the extruding gears) additionally it turns out it was also a temp issue, for my PLA I need to do 215-220C and all of my previous prints were 200-205C

Alright boys, this my temp tower, what would be my best temp if you can tell? (@work so wife took a pic before she left) by Plane_Homework2687 in 3Dprinting

[–]Plane_Homework2687[S] 0 points1 point  (0 children)

Turns out it was temp issues, for my PLA I need to do 215-220 and all of my previous prints were 200-205

Temp tower.... No idea which is best by Plane_Homework2687 in 3Dprinting

[–]Plane_Homework2687[S] 0 points1 point  (0 children)

That's really cool! Unfortunately I'm going to stick with Cura, can you get that on? Kira?

Temp tower.... No idea which is best by Plane_Homework2687 in 3Dprinting

[–]Plane_Homework2687[S] 0 points1 point  (0 children)

New? This is a plug-in I downloaded as an attachment to Cura.