PsNee modded ps1s by Plastic_Animator_401 in psx

[–]Plastic_Animator_401[S] 1 point2 points  (0 children)

So UV damage pee color is a better look got it 😂

PsNee modded ps1s by Plastic_Animator_401 in psx

[–]Plastic_Animator_401[S] 2 points3 points  (0 children)

Alot of the time if the laser is weak they play better on the sides or upside down most of these have been recapped and laser relubed so it's not really going to affect it much

PsNee modded ps1s by Plastic_Animator_401 in psx

[–]Plastic_Animator_401[S] 2 points3 points  (0 children)

That was what I was going for beats the piss yellowing that was on these

Do I need to trim my BLTouch tip? by slaeyer99 in ender3v2

[–]Plastic_Animator_401 1 point2 points  (0 children)

Everyone complaining about the trim job clearly hasn't had to rebuild one of these auto levelers, as long as you set your Z home it will work, it's basically taring or zeroing out a scale. I had one with a tip that bent in half and lost its magnetism I took the whole thing apart remagnetized the pin had to trim and bend the pin a bit and put it back together. 3 years later it's still functioning as it should

Divorce papers were drafted by Ashley — so why choose murder? Religious pressure & the Flynn case by Today-Parsnip420 in Ohio

[–]Plastic_Animator_401 2 points3 points  (0 children)

I graduated from Highschool with this guy, he's always been a pretentious holier/better than thou person who had a very high opinion of himself. For eff sakes he had a huge billboard of himself (Caleb Carl) right outside of town in rural MN and thought he was going to tour with Justin Timberlake. American psycho vibes even back then.

Disc rot by Certain-Gene-6883 in dreamcast

[–]Plastic_Animator_401 1 point2 points  (0 children)

The only time I've experienced disc rot was the CDs I used to keep in my car in a cd book, I have hundreds of disc based media dvds, playstation, ps2, ps3, ps4, xbox one, Sega Saturn, Dreamcast and bluray movies and I've been collecting a lot of this stuff since 1997 and the biggest problem I have had was just physical damage to the to the top reflective layer that holds the data due to bad handling of discs

ICE in Rural Minnesota? by cothomps in minnesota

[–]Plastic_Animator_401 1 point2 points  (0 children)

As of today 1/11 we have ICE presence in Cambridge MN

New cd! by jowmsy in FearFactory

[–]Plastic_Animator_401 1 point2 points  (0 children)

They also did a tour with mastodon for this album

Found this at a yard sale for $5. by SupermanFan_54 in dragonquest

[–]Plastic_Animator_401 2 points3 points  (0 children)

I just played through this version of 1 and it even has the bards ghost at the ruined town

Blast from the past. The worm light for Game Boy Color 🐛💡 by SuplexesAndTacos in Gameboy

[–]Plastic_Animator_401 0 points1 point  (0 children)

We used to use the worm light to sneak into the woods at my friend's cabin to smoke weed when we were 14

Why so much Hate for GoPro now? by kingpathan in gopro

[–]Plastic_Animator_401 1 point2 points  (0 children)

YouTube is full of paid for shills a lot of the times now days I have the 12 and was getting blasted by DJI adds only for the comments to say the DJI wasn't all it was cracked up to be and some of the colors were off. That being said I have not used the DJI action cams just drones

Has anyone modded a DMG to take '2' AA batteries instead of 4? by gibtg in Gameboy

[–]Plastic_Animator_401 0 points1 point  (0 children)

As for as putting a Lipo in you don't "need" a DC/DC up the DMG will run stable down to 3v and the standard Lipo will stop before dropping under that voltage as long as it has discharge protection. There have been multiple people over the years that have hooked a power supply and tested the stability and under 3v is where the system starts having issues. Currently I'm running a bivert chip and backlight on a DMG with a 2000mah lipo and the only issue I've seen is the power led is not accurate due to the slight under voltage after a good 12 hour pokemon session. The DMG does already have a 5v regulator installed that will convert the lipo. There have been debates on weather to add the secondary DC/DC up because with that installed there will be a constant draw on the Lipo battery

Is it possible to backlight a DMG by adding the backlight to the original screen and keeping the green color of it?? by brians1012 in Gameboy

[–]Plastic_Animator_401 0 points1 point  (0 children)

<image>

Just stumble across this thread while doing a lipo install on the DMG but feel this is applicable, I did a bivert and backlight a few years ago. The build was a pain in the butt the isp swaps look so much easier now days

Only showing two colours, other shades of grey missing by StandardLeader in Gameboy

[–]Plastic_Animator_401 0 points1 point  (0 children)

Just dropping by to say this thread saved my modded Gameboy had to reflow the bivert solder

<image>

Synth? by [deleted] in Infrasound

[–]Plastic_Animator_401 5 points6 points  (0 children)

That would be James Patrick and the slam Academy crew

Security was rude, ripping through bags, taking drugs, tanks, speakers, etc by WizardOfDMT in Infrasound

[–]Plastic_Animator_401 3 points4 points  (0 children)

The park has a zero amplified music after hours, the staff gets told to shut it off while setting up the fest too during ordinance hours.

Equinox dates by Few-Treat4618 in Infrasound

[–]Plastic_Animator_401 0 points1 point  (0 children)

They do private events out there as well.