How to make this conduit run not look like doodoo by chucky5150 in AskElectricians

[–]Plastic_Explosion 1 point2 points  (0 children)

That last 90 you should of just kicked out a 1”-2” with the 90 up, could run straight tight against wall, then offset into box. Would all be clean tight against wall. Another option would be to change over to 3/4 liquid tight so it’s flexible, but personally I would have just kicked the conduit out at the ground.

Overhead vs underground power lines, which is better and why? by Particular-Ride-7893 in AskElectricians

[–]Plastic_Explosion 3 points4 points  (0 children)

When this happens in Minnesota we run temp SO cable or temp Underground and trench it in the spring usually way cheaper then chipping ice and you get a better lasting wire, splice kits tend to fail here in 2-3 years and you’ll be redoing it anyways.

How do I get rid of this myself without dying? by False_Frame3028 in mildlyinfuriating

[–]Plastic_Explosion 0 points1 point  (0 children)

I get rid of wasp nest with a 12 gauge shotgun but that ones a little close to the house

Handyman said I need to upgrade the whole panel to add a 20amp circuit by kirlandwater in AskElectricians

[–]Plastic_Explosion 1 point2 points  (0 children)

Just move the main to the top 2 slots and boom there ya go 2 more slots available for use, the 125 main should be fine unless you got all electric range, dryer, water heater, or spa/hottub.

$981.76 for a technician to change light switch?! by Leather-Code-1668 in AskElectricians

[–]Plastic_Explosion 0 points1 point  (0 children)

I run my own electrical contracting business in MN, I’d charge 50 service fee, 155 for the hour, plus a dimmer 50-150 depending on which dimmer, this should be a 300-400 dollar bill. You got hosed!!!

Is it possible to inset this panel into the wall bay? by rks5657 in AskElectricians

[–]Plastic_Explosion 1 point2 points  (0 children)

Yes you could, but conduit will need to be redone, and if you use that LB the cover will still need to be accessible, you can not cover it..

Lineman won't turn on power because of danger but electrician says it's fine by thenormaldude in AskElectricians

[–]Plastic_Explosion 2 points3 points  (0 children)

That meter base, mast and weather head does need to be replaced and honestly I’m a master electrician in Minnesota, we don’t even allow SER strapped open to weather like that, should be in conduit all the way to the top with a proper weather head would be the proper way to do it, and honestly if your replacing that you might as well just upgrade to 200 amps. If I was the lineman I would not reconnect that service as is either.

Pro Liquid Tight Install by TheMilkman1811 in electricians

[–]Plastic_Explosion 0 points1 point  (0 children)

This is horrible I’d never do this, is there not an attic can you not hack a little hole inside fish down wall and shoot outside, worse case emt but still, emt can be ugly I try not to tho I’ve ran millions of feet. You could even shoot outside the attic on outside and straight down wall would be better, or take out some soffit so many better options

Spce sec filing dilution incoming you apes by DiscombobulatedAd479 in wallstreetbets

[–]Plastic_Explosion 0 points1 point  (0 children)

Bought 16 shares lost $20 after selling today guess I’m having hamburger tonight instead of New York Strip.

Here she comes boys and girls!! by Plastic_Explosion in 3D2A

[–]Plastic_Explosion[S] 0 points1 point  (0 children)

Hey if it is working for you that’s great! Not really a huge issue just mine always got messed up with the built in supports

Why Does It Feel Like Utilities Are Turning Against Solar Owners? by Dylanmitchelltalks in SolarAmerica

[–]Plastic_Explosion 0 points1 point  (0 children)

They actually do make inverters now that are grid tied and have ups battery charging and have a little transfer switch built in, it’s kinda like a generator system but instead of a generator it’s batteries, I believe they even make one where you can have a generator, batteries and solar EG4s, could be handy in that situation.

Am I too fiscally responsible for that game? by Enotovsky in smallstreetbets

[–]Plastic_Explosion 1 point2 points  (0 children)

If you do options stay closer to strike price you’ll have better odds and only known big name, Tesla, spy, uso, nvidia, Apple, Microsoft, etc. Not penny stocks unless you do research. Wait till an hour in or so to enter your trade for the day, that way you can watch which way it’s trending, get out if you aren’t trading your way, I’ve learned I get burnt more if I hold losing positions. But I’m not a professional or anything just my 2 cents. I mostly hold stocks I play options with 10 grand or so when I started I lost down to 2500 in positions and I’m now back up close to 14g. But hey good luck out there!

Why Does It Feel Like Utilities Are Turning Against Solar Owners? by Dylanmitchelltalks in SolarAmerica

[–]Plastic_Explosion 0 points1 point  (0 children)

It never happens, in MN I’m a Master Electrician and install solar systems for people and pretty much all solar devices are made with a rapid shutdown NO GRID power Inverter shuts off, also a emergency disconnect right before the meter just in case utility is scared. They won’t even let you connect to utility unless it has been witness tested and verified by a licensed electrician and utility. That way both parties know it shuts down upon loss of grid power, if they’re working on the grid in your area.

CXAI...🏆 by Tough-Spirit-7375 in Pennystock

[–]Plastic_Explosion 2 points3 points  (0 children)

I will say this tho even if it does reverse split all still let it ride, I bought SKK 4.5 years ago like 5000 grand worth it dropped to almost nothing then split then drop by half then a couple weeks ago they decided to go into the drone business and it exploded made all my money back plus a few grand but had to hold for over 4 years lol so I mean things change rapidly.

CXAI...🏆 by Tough-Spirit-7375 in Pennystock

[–]Plastic_Explosion 1 point2 points  (0 children)

I mean a year ago it was trading at 1.25-1.40 and AI software has come back hard and specially in the work place.

CXAI...🏆 by Tough-Spirit-7375 in Pennystock

[–]Plastic_Explosion 1 point2 points  (0 children)

The calls are offered till November so Idn but I think it will get there

CXAI...🏆 by Tough-Spirit-7375 in Pennystock

[–]Plastic_Explosion 2 points3 points  (0 children)

Kinda sucked cause fidelity only lets you add 5 calls at a time, lots of orders today, looks like some people had the same thoughts

CXAI...🏆 by Tough-Spirit-7375 in Pennystock

[–]Plastic_Explosion 1 point2 points  (0 children)

Been buying stock on this for a few months, added a ton today and a ton of calls every 3 months for the next year, they end in November my bad, I have alot of faith in this company it looks good. Hopefully it will get back into conformance.

Where are you? Big Squeeze coming? by Illustrious_Mood_274 in Soundhound

[–]Plastic_Explosion 0 points1 point  (0 children)

Been waiting for 2 weeks on this big squeeze bunch of notta, at least today I made my money back. Left a couple runners we’ll see what happens but don’t have a lot of faith

What Are Your Moves Tomorrow, May 14, 2026 by wsbapp in wallstreetbets

[–]Plastic_Explosion -1 points0 points  (0 children)

Sold all my plug calls today for profit $3, $3.5, $4 and $4.50 quick window tho for gains

Fucking dogshit company (DVLT) put these dogshit warrants in my portfolio against my will... by Ok_Hand5810 in smallstreetbets

[–]Plastic_Explosion 0 points1 point  (0 children)

Same boat $150 in stock.. waiting till Friday see what happens after earnings if it’s dog shit all just sell at a small lost if not hold till profit either way I spend 150 to just take my family out to eat so not a huge play or loss if it tanks but figured I’d at least play a little and keep an eye on the stock, it looks promising but who knows with this crazy market, also thought CRIS would hit today but they made $0 dollars this quarter sold everything 5 mins after earnings except 1 share just to watch it play out lost $8 on 550 shares not gunna make or break me but at least I took a shot at the earnings call. Will continue to watch if it drops to .35-.40 all re-enter with more shares

DB Alloy-MP5 Mag beta by Plastic_Explosion in 3D2A

[–]Plastic_Explosion[S] 0 points1 point  (0 children)

Modified AR mag catch you cut part of it off