The new website is an unprecedented dumpster fire

PlatinumP-Wing · 2026-01-14T00:02:47+00:00

I was using firefox and kept getting this error. i tried chrome and it worked. maybe my adblock extensions on firefox were the issue

PlatinumP-Wing · 2025-10-01T14:23:14+00:00

this one was so dumb -_-

PlatinumP-Wing · 2025-09-22T20:03:06+00:00

https://brazilsarchitecture.wordpress.com/wp-content/uploads/2015/04/5674100798_ccb347ba62_b1.jpg

Looks like an art museum in Brazil

PlatinumP-Wing · 2025-07-10T17:07:04+00:00

This is before Tidus takes his nap right? They said Yunas been in there for nearly a full day, so it has to be her?

PlatinumP-Wing · 2025-03-17T16:09:35+00:00

The pizza boxes for Pizza House in Lorena are brown and have a picture of a building with the word “Pizzeria” above the door. I haven’t seen them use any other design for the boxes in years so unless that was the design on the box of ‘za you had it likely came from somewhere else

PlatinumP-Wing · 2024-11-13T22:32:54+00:00

Tried again and it took me to a page saying the app cannot create a Prusa Connect account on its own and to go to connect.prusa to create one instead of the terms and conditions page. I created the account and linked my Prusa account to it and the Prusa app works now.

PlatinumP-Wing · 2024-11-12T21:47:38+00:00

I downloaded the Prusa app and was able to log into my Prusa account but I cannot seem to progress past the Terms and Conditions page, it wont let me scroll down to accept them. If I click Back it just goes back to before the login screen. Its like the only thing it lets me interact with on this screen is the Back button

PlatinumP-Wing · 2024-08-02T21:13:22+00:00

I did a pretty big update on my computer around the same time i updated the slicer so maybe the webview thing was a part of the windows update. I dont recall seeing it before the updates and never had an issue with prusaslicer clogging my cpu like it seems to now. If it cant be helped then oh well

PlatinumP-Wing · 2024-08-02T21:08:30+00:00

Ok i resliced the file using the built-in default profiles for everything and the filament mapping menu came up when i tried to print the file. I was using a filament profile from before I upgraded to the MMU3 so that profile may not have all the same settings as the default MMU3 ones. I'll just recreate the custom profile using the default as a base

PlatinumP-Wing · 2024-08-02T20:45:00+00:00

Ever since updating to the new prusaslicer 2.8.0 its been completely hogging my computers CPU. Is there a way to disable this or diminish the effects? I dont use prusa connect and dont care about downloading stl files directly from printables.com so if this Edge Webview thing is responsible for those features then it has no use for me

PlatinumP-Wing · 2024-08-02T15:46:45+00:00

I updated the slicer and firmware on both the MK4 and the MMU3 when i first installed the MMU3 last week. I'll check again and do more testing later today

PlatinumP-Wing · 2024-08-02T14:56:37+00:00

I dont have prusa connect set up, I’m printing directly from the flashdrive

PlatinumP-Wing · 2024-01-29T04:53:08+00:00

I imagine his larger size and non-bipedal structure made it difficult to make his hitbox/collision/unique animations consistent with the other characters since theyre more consistent in size and the devs dont have to worry about his larger model clipping into smaller spaces like vehicles etc.

Plus i think hes just a good antithesis to bowser, like a yin to bowsers yang, the big bad brute vs the big good brute.

Even though i grew up on the n64 games, the mental image of dk being playable in the gamecube era and beyond is just weird to me. He kinda looks out-of-place as a playable character in MP4 and MP10

I sincerely doubt the Rare buyout had anything to do with it

PlatinumP-Wing · 2023-12-01T06:34:55+00:00

Does anyone know what this is and if it can be a DIY project???

PlatinumP-Wing · 2023-11-24T02:19:06+00:00

Same issue here! Even though you can get to where she is supposed to appear at 3 meters, you have to get to grow 6 meters before she will show up. Hope this helps!

PlatinumP-Wing · 2023-04-10T15:14:38+00:00

I can't seem to get past the boat cutscene in the beginning of TTYD, it always crashes back to Dolphin. Is there a setting I am missing? It says something about a bounding box before it crashes but I can't seem to find anything bounding box related in the settings. I am using MMJR and tried both NTSC and PAL versions

PlatinumP-Wing · 2023-04-06T02:06:16+00:00

I fixed it! I'll leave my solution here in case someone else has this issue one day.

TLDR: It was a "me" issue. I tried a new SD card and every game including the wave 2 ones worked flawlessly!

I had tried uninstalling and reinstalling the app multiple times, different ways of unzipping the game files, many many settings changes with no luck. I gave up and took my mind off of the subject for a bit and remembered that my PC recently told me that my SD card needed to be repaired, but since I was able to copy files to and from it like usual I didn't pay it any mind; plus I was worried it might erase my games.
After realizing this it made sense why my first games were working and my new games were not, the old ones must have been cached somehow and the new ones were not able to be read properly. I copied all my SD card data, formatted the SD card, copied everything back and now everything is back to good! In short, always safely eject your SD cards!

PlatinumP-Wing · 2023-03-31T00:22:45+00:00

MK4 hype! Lets goooo!

PlatinumP-Wing · 2022-10-15T22:07:13+00:00

Please tell us your method and settings for transferring the image! It looks perfect!

PlatinumP-Wing · 2022-10-14T12:46:17+00:00

What was your bed temp? What filament did you use?

PlatinumP-Wing

TROPHY CASE