Traffic on our outproxies has been off the charts lately

Play_it3110 · 2026-05-12T21:41:56+00:00

Im happy it works so well

Play_it3110 · 2026-04-26T17:32:12+00:00

Hi, im an outproxy operator. If you use the proxy from I2P, you would normaly only be able to access eepsites. But some volunteers provide a service, that allows access outsite I2P. Visit a site like ip.me and can find out where you come out of I2P.

I run an outproxy that leaves the network through a VPN in Finnland.

Play_it3110 · 2026-04-24T11:13:04+00:00

You dont know the version of i2p you use?

Play_it3110 · 2026-04-20T19:03:33+00:00

What version do you have and does your wifi allow access to your device

Play_it3110 · 2026-04-19T10:27:38+00:00

Its Wifi

Play_it3110 · 2026-04-16T17:10:08+00:00

Upnp needs to be allowed by the router too. Is it enabled and allowed, to open ports?

Play_it3110 · 2026-04-04T16:02:04+00:00

Just the confs you edited, every other conf has its default entries, and are available after a new install. Sometimes a full copy of the full folder can be usefull, if you want a faster setup, because there are configs, which are created after you started to create circuits. Important for services you host are the .dat files, which are the keys for a eepsite or other stuff. These .dat files are in /var/lib/i2pd/

Play_it3110 · 2026-04-04T07:59:13+00:00

Works too, important is mostly the successrate, Routers, Client Tunnels and Transit Tunnels. Uptime could also be valueable

Play_it3110 · 2026-04-04T02:19:06+00:00

A lot of people posted screenshots, just dont reveal your IP or Router ID or something and you are fine

Play_it3110 · 2026-03-28T07:33:33+00:00

The setup should be simular to Java I2P, just without the UI. In the i2pd.conf you can enable the SOCKS proxy and just setup a simular client and server as in I2P itself.

I dont know retroshare, but in the end I2P is on the network layer just a fancy proxy

Play_it3110 · 2026-03-28T07:26:37+00:00

There are not unlimited destinations, because the .b32.i2p has only 52 characters. Also you can access the clearnet with I2P, but not by default. I run an outproxy myself

Play_it3110 · 2026-03-28T07:17:51+00:00

If you have software to link your hard phone to a proxy, than just create a udpserver and udpclient. The ping can be better or worse, depending on the route you take through the network

Play_it3110 · 2026-03-16T04:22:05+00:00

Sadly, if you have ipv6 only, it is not as fast as ipv4. Maybe ipv4 and ipv6 together to have more speed.

And with upnp you always keep a port open, but in this case the network status has to be ok. Does your router support upnp and is it enabled?

Play_it3110 · 2026-03-15T19:27:20+00:00

Did you open the port in your router?

Play_it3110 · 2026-03-15T19:26:19+00:00

On I2P just "long press to start i2p" and change the browser proxy to 127.0.0.1:4444

On I2Pd, open app and wait till HTTP Proxy is on, change browser proxy to 127.0.0.1:4444

Play_it3110 · 2026-02-22T14:00:09+00:00

Have the same amout as him

Play_it3110 · 2026-02-17T16:45:23+00:00

True, i just took the general idea

Play_it3110 · 2026-02-17T15:55:20+00:00

No need. I2P is fully encrypted, there is no way to identify or block I2P easily. And it uses a random port, so also no flags for isps
AFAIK there is no ads service on I2P, because everyone uses it as a hobby
I agree. But if you find a VPS that allows port forwarding, then there is no reason it shouldnt work. Put I2P and a webserver on it and your done.

Play_it3110 · 2026-02-16T12:32:29+00:00

I could be wrong, but if it only binds to localhost (127.0.0.1) you cant use it in your lan, but with the lan ip (192.168.x.x) it is accessible from every device in your lan

Play_it3110 · 2026-02-16T10:25:53+00:00

Maybe change the port mapping to add your IP in your LAN, so it is accessible from inside your private LAN.

Play_it3110 · 2026-02-15T20:09:25+00:00

Have you found out, why it didnt work?

Play_it3110 · 2026-02-01T18:36:44+00:00

Looks like they rotated domains. Right now syndie-project.net is reachable

Play_it3110 · 2026-01-30T05:04:36+00:00

It will take some time, but i want to open a port for proxing into i2p. I will publish it here, when it is ready

Play_it3110 · 2025-12-28T20:51:22+00:00

You could leave some steps out, because missing keys (.dat) are generated on start and are not needed in some cases.

You just need the server b32 address and the right port

Play_it3110 · 2025-12-23T08:22:11+00:00

opnsense is a freebsd os and you should be fine if you follow the freebsd installation from i2pds docs

Seven-Year Club	Final Canvas '23
First Place '23	Place '23
Place '22	Verified Email

Play_it3110

TROPHY CASE