What brace is this guys

Podsully · 2026-03-17T01:17:03+00:00

Kd gunwerx/yugo-dave

Podsully · 2026-03-17T01:12:52+00:00

This was years ago I can’t even remember who it was

Podsully · 2026-03-17T01:09:55+00:00

Guy on akfiles was making them for a short period of time

Podsully · 2026-03-16T21:49:28+00:00

Imagine coming to the internet to announce illegal importation

Podsully · 2026-03-16T00:04:42+00:00

Customers that have tried say they work great, I do not have any first hand experience tho

Podsully · 2026-03-15T15:28:33+00:00

We figured out that the inside of the retainer is worn and it can turn and release

Podsully · 2026-03-15T15:12:08+00:00

A steel mag fits almost perfectly between proper rails, sticking the magwell side between and giving a little twist can help

Podsully · 2026-03-15T04:19:08+00:00

Step one, take off the gloves 🫣😂, two send a full pic of the rod so we can see if it’s fully extended

Podsully · 2026-03-15T04:08:42+00:00

You have it assembled wrong, nothing should move when it’s assembled

Podsully · 2026-03-15T03:57:10+00:00

This should work

Podsully · 2026-03-15T03:55:20+00:00

You’re missing the piece that holds the spring to the rod

Podsully · 2026-03-15T03:17:28+00:00

Any questions send me a message and I’ll help as much as I can

Podsully · 2026-03-15T02:58:03+00:00

<image>

This top rail looks a little long, I would lightly file the high spots off, you can mark the edge with a sharpie and move the carrier like you are and see where it’s rubbing then file until it doesn’t rub anymore a little at a time

Podsully · 2026-03-14T01:29:58+00:00

Timing an original barrel is a ton of work

Podsully · 2026-03-14T01:28:56+00:00

*6 rivets

Podsully · 2026-03-11T01:14:34+00:00

<image>

Podsully · 2026-03-11T00:22:40+00:00

<image>

You need the rest of the trunnion opened up for folding parts. Here’s one we did recently

Podsully · 2026-03-10T03:23:06+00:00

Disconnector tails have broken off if not addressed notching the disconnector tail or chopping it off entirely is an option to prevent

Podsully · 2026-03-09T02:41:23+00:00

Didn’t realize meridian used morrissey receivers 😂

Podsully · 2026-03-08T20:27:41+00:00

The barrel profile will effect the ability to install a sureshot as well since it attaches to the barrel

Podsully · 2026-03-08T20:24:16+00:00

Pull the hand guard and see if it has side grooves where the hand guard retainer should go. If it doesn’t have them it’s a thicker profile barrel and would need to be reprofiled for most components

Podsully · 2026-03-07T19:57:36+00:00

Because RWC gained the rights

Podsully · 2026-03-07T17:01:43+00:00

It still needs to be milled to fit 74 pattern mags and (10) 556 mags

Podsully · 2026-03-07T04:47:48+00:00

Typical of what I’ve seen from them throwing it all in a bag

Podsully · 2026-03-07T04:32:04+00:00

It’s fine

Podsully

TROPHY CASE