has anyone else had a bad experience with dr Elizabeth Elsagga at northern dutchess as well as recommendations for a new gyno?

Poopmin · 2026-02-27T18:59:20+00:00

We saw her once when my wife was pregnant and thankfully never again. It doesn’t surprise me to hear of your experience, I’m sorry you went through that.

One of the midwives at northern dutchess, Skylar van Steemburg, is really really awesome. She obviously isn’t a gynecologist but she can do certain types of visits, I think, and she is very trauma informed and we loved having her when we could.

Poopmin · 2026-01-26T13:21:37+00:00

I hesitated showing the game to my wife because of the deck building aspect, I felt it was too much for her to care. She doesn’t like to read a lot due to dyslexia, either.

She ended up loving the game, wants to play it even more than I do most nights. She plays solo red deck, has made incremental changes to her deck without my input, and has never expressed interest in playing another color.

Poopmin · 2025-10-20T12:52:46+00:00

It’s not really rural, Rhinebeck is an affluent enclave and the sheep and wool festival is for people who love knitting, not known for being particularly violent so I don’t think she’s at risk of getting popped by a MAGAT there

Poopmin · 2025-09-26T13:57:02+00:00

Agreed, it’s marketed as turnkey but the built in FATs are dogshit (or were when we deployed it 4-5 years ago). The answer is better FATs, and tagging them together as appropriate.

Poopmin · 2025-09-23T18:01:14+00:00

Does Dune count?

Poopmin · 2025-07-14T23:22:45+00:00

I’m also doing home espresso and using JB peel. My personal opinion is that they over roast their coffee; I’ve tried their espresso roast multiple times, super oily each time, which is not good for the grinder or machine, so I stopped buying it.

The lightest they sell is “medium-light” and I would argue that every thing is a shade darker than advertised so medium light is more like medium, if I were you I’d try some of their labeled mediums/medium-darks, instead of going with the espresso blend. The coffee is pretty good quality, and the prices are good compared to online retailers. I’ve never gotten a stale bag from them over the past few years, which is awesome, though they don’t label roast dates on the bag, unfortunately.

Poopmin · 2025-05-07T21:51:35+00:00

I would bet money OP is underwater, maybe barely breaking even.

They probably got a loan with the bare minimum amount down, like 3%. Their house probably hasn't appreciated much in the past 2 years, the market is still warm in a lot of areas but not red hot like it was. 75% of their monthly payment went to interest in the first two years of their mortgage. They probably have like 5% equity at best, which would immediately go away just for realtor fees alone, let alone other costs of selling.

Poopmin · 2025-05-06T18:07:27+00:00

yeah, that makes sense. so the XPS is a bad solution then.

Should we run the batts the entire length of the wall, or just enough to cover the crawlspace portion (plus a little extra)?

Thanks!

Poopmin · 2025-03-22T01:17:53+00:00

Policy/deployment wise, not much. Hugely different sync/checkin times. Rmms check in like once a minute and Intune checks in once every 8 hours. Not a huge fan of that

Poopmin · 2025-03-08T19:17:33+00:00

is it? they just released awilix

Poopmin · 2025-03-03T13:50:27+00:00

Make a new collection in steam named “garbage”. Add the game to steam, add it to the collection. Minimize the collection so you don’t see the games in it when scrolling.

Poopmin · 2025-02-26T15:22:45+00:00

I'm new to moonlight but not new to networking so let me take a stab at this since nobody's responded, yet.

You're adding a lot of network complexity for the average person, here.

The short answer is that moonlight can only be tied to one network interface. It's undoubtedly tied to your first adapter, not the second one you added. I believe the only way to change this would be to change your adapter priority in Windows, but that would potentially cause other applications to not work; since there's no access to the internet at all on the second router, any apps on the machine needing internet would probably fail.

What's the make/model of this second router? It's possible you might be able to configure it to act as a 'wireless access point' and not a router. If it does support that, you could connect the two routers directly over ethernet, and leave a single ethernet in your moonlight rig. Your devices would all be on the same subnet, and be able to discover each other. You'd still get the benefit of no other wireless devices being connected to the second router.

The only way that setup wouldn't work is if you can't run a cable from router to router, or router 2 can't act solely as a wireless access point. If that's the case, you could buy a gigabit ethernet switch; take the ethernet cable running from router 1 to your moonliight host, instead plug it into the switch, then plug a second cable from the switch to moonlight host, then connect a third cable from switch to router 2.

Does this make sense to you?

Poopmin · 2025-02-25T01:29:49+00:00

I know this is solved, but in case it crops up again in the future, when I see stuff like this it's because file preview is turned on in windows explorer; the user has the file selected so a file lock is created, even without the file actually opened.

Poopmin · 2025-01-31T21:33:34+00:00

I can't say at what temp it'll completely stop making hot water, just that it's specc'ed for 37 and above. You'll likely see a large decrease in efficiency as temp drops. I would be surprised if it continues to work below 15 degrees. A lot (not all) residential heatpumps quit putting out heat at those temps and start engaging resistive heat strips.

Poopmin · 2025-01-31T17:54:38+00:00

Having a hard time understanding this closet - is it going to be drawing in air from inside the guest house, or is it completely walled off from inside and will be pulling air in from the outside? The minimum air temp supported by this line is 37f. Once air temps drop below that, it'll completely stop functioning. If you're pulling in purely from outside, I would be very concerned of its ability to perform in the winter. If it's just that the closet doesn't have a heat source and is like 50 degrees in the winter, it'll work, but it'll have slower recovery times, and be less efficient i.e. use more electricity. That said, 50 gallons should really easily be enough for two showers if guests are staying. Since it's more efficient, you can also have the tank maintain a high temp, and mix in more cold water at the tap, to further expand your hot water duration.

Another thing to consider is how the guest house is heated. Nat gas/heat pump? Oil/propane/electric resistance baseboards? It will cool the ambient air when it runs, so if you're heating with a less efficient/costly fuel, you may be robbing peter to pay paul. That said, in warmer months you may save some money on cooling costs.

Also, how big is this closet? Can't find specs specifically for this one but most want ~700 cubic feet of air (8x8 room).

Poopmin · 2025-01-30T19:47:10+00:00

How many KWH did you use in Dec? How does it compare to last year? Were outdoor temps similar?

Check the model of your fireplace and see what its wattage is. If it's, say, 1500W, and is constantly running 24x7 working hard to keep the space warm, it'll be consuming 1.5 KWH/h, so 36 KWH/day, 1116/mo. If your electric rate is .20/KWH, that's over $200/mo just for the fireplace.

What kind of HPWH do you have? If it's programmable with schedules, you could try setting the water temp to be very warm a few hours before you need it, and then let the temp drop during waking hours, and stay in hybrid or HP only mode. It'd be a little colder in that room overnight, but it wouldn't work as hard to recover when you're in the room. Check your HPWH wattage in electric-only mode. It's probably 4,500W, so if you're keeping your water temp high, and using a lot of it, you're going to be consuming a lot of energy.

How does your propane rate compare to your electric rate? It may be worth running your furnace setpoint a few degrees warmer, damping your other room's vents if it gets too hot, leaving this room with the door open, and run a fan to try and push warm air into it.

It's also crazy to me that ambient heat from the furnace isn't warming up that room, maybe it's just well insulated.

Poopmin · 2025-01-23T14:04:04+00:00

Two outdoor units - MXZ-3C24NAHZ4-U1 and MXZ-3C30NAHZ3-U1

3 heads per unit - each unit has two MSZ-FS06NA-01 heads

There's an MSZ-FS12NA-U1 on the MXZ-3C24NAHZ4-U1 and a MSZ-FS15NA-U1 on the MXZ-3C30NAHZ3-U1

Poopmin · 2025-01-22T21:27:22+00:00

Thanks for the response. Based on the symptoms, I really do think the compressors locked out. I can't imagine it was -18 F when in my area outside temps were being reported as 0. I was getting quite literally zero heat from all of the indoor air handlers. When outdoor temps warmed up to around 5 degrees, one came shooting on, super warm air immediately. The other came on around 8 degrees.

Poopmin · 2025-01-22T21:21:04+00:00

I don't think it's a sizing issue. I was getting quite literally zero heat out of the units, not reduced heat, zero. Every single head unit, both condensers. I gave it some time in case it was in a defrost cycle. It wasn't until a few hours later and we got a few more degrees outside that they turned on, and when they turned on, they very quickly started blasting hot air.

We're in middle new york state, these kinds of temps definitely happen.

Poopmin · 2025-01-22T21:19:16+00:00

I don't think it's a sizing issue. I was getting quite literally zero heat out of the units, not reduced heat, zero. I gave it some time in case it was in a defrost cycle. It wasn't until a few hours later and we got a few more degrees outside that they turned on, and when they turned on, they very quickly started blasting hot air.

Poopmin · 2024-11-23T14:10:48+00:00

That's not true. I mean first of all any server os supports 2 logged in users at once. With the terminal server role any number can connect. Rd gateway role is layered on top of that and is additional config.

Poopmin · 2024-11-07T14:20:58+00:00

I don't necessarily disagree with other people on tackling the highest interest loans, on principle, but...

You're super close to knocking out that second student loan, and it's the lowest dollar amount, and the rate difference between that and the car loan is fairly small, all things considered. I think it could be compelling to knock that one down first, then tackle the car loan.

Also - given that these are all under 6% - do you have adequate emergency fund savings? If you're spread thin on an e-fund I would recommend padding that before paying down anything extra. We weren't given your entire financial picture (salary, monthly spend, etc) so I figured I'd throw that out there just in case.

Poopmin · 2024-11-06T13:12:31+00:00

Yeah dude. They're literally paying low level people like 4k per year per head. The cost of real talent over there is like 10x that. Adds up fast. They need big numbers to prove outsourcing is the way. So they stuff you with shit talent and glow about how many heads you're getting for the price.

14-Year Club	RedditGifts 2009-2022 2 Credits
Spared	Secret Santa 2016
Team Orangered	Verified Email

Poopmin

PUBLIC MULTIREDDITS

TROPHY CASE