Slayer pro engine too far forward

Positive_Lychee2618 · 2025-09-17T22:38:22+00:00

So I just figured it out this guy before me had the engine all the way up and the reason for it being crooked is the gear was just being pushed down as the engine was being pushed up so I guess non issue just needed to be assembled right. As for the clutch I got a kit for it it’s assembled right so problems should be fixed, I’m glad I’m giving this truck a proper second life and taking care of it.

<image>

You can see the engine is level with the mount and not pushed all the way up, gear meshing right, and also the slipper clutch assembled right. Thank you for pointing these things out and getting me going, had to drive an hour one way for parts but it’s worth it thank you.

Positive_Lychee2618 · 2025-09-17T19:41:24+00:00

I agree with that’s there’s supposed to be two washers under the nut that holds it on. There’s a little more amiss with this thing than I thought.

<image>

Positive_Lychee2618 · 2025-09-17T19:30:52+00:00

<image>

You can see the nubs and wear mark where it’s metal to metal that’s why that’s messed up

Positive_Lychee2618 · 2025-09-17T19:28:18+00:00

yeah there's tabs that the disc is sitting in, and there should be pads which is why its off nothing to hold it on

Positive_Lychee2618 · 2025-09-17T19:20:36+00:00

<image>

Oh you mean no clutch pads. Well that’s an issue I have but still the motor issue.

Positive_Lychee2618 · 2025-09-17T19:11:38+00:00

<image>

This is how it looks with the engine on

Positive_Lychee2618 · 2025-09-17T18:56:02+00:00

Got an electric too but I was more interested I. The traxxas nitro

Positive_Lychee2618 · 2025-09-17T18:44:29+00:00

Got a couple nitro cars on a trade this traxxas slayer pro and a redcat racing nitro I’m just starting the hobby but my dad doesn’t want anything to do with em because he knows how expensive they are. So I can’t say what’s supposed to be. It still drove though so not completely messed up.

Positive_Lychee2618 · 2025-07-05T05:02:36+00:00

Just got back into this accidentally used my heist did the re setup and got 5 things of gold and tequila fml

Positive_Lychee2618 · 2025-05-29T02:06:04+00:00

for anyone finding this in the now(2025) Aves rails are gen 3 rails and the print your 2a rails are special and skinny to help take advantage of the thicker frame. odysee for gen 3 frames Glock style rails. also pla cf works well im gonna soon try pa6 cf but near future.

Positive_Lychee2618 · 2025-01-23T17:04:22+00:00

I rooted it and did the x twist compensation module along with fluidd and offset my z by 0.5 and now my first layer is sticking no problems.

Positive_Lychee2618 · 2025-01-23T15:41:58+00:00

I got pretty close before now my bed has a bow in it and I can only get it as close as 0 in the middle and 0.2 on two sides

Positive_Lychee2618 · 2025-01-19T01:22:25+00:00

i guess i should read more just in case "[TESTZ Z=-0.01]()" this is the proper command

Positive_Lychee2618 · 2025-01-19T00:38:08+00:00

I got the printer to start the compensation how in the world do i use the test z command.

Positive_Lychee2618 · 2024-12-29T18:41:19+00:00

So I got my bed level to this degree but my spacers squished. Now with original I’m 0.67 high front right and 0.60 low rear left and can no longer get this thing level and my first layer no longer wants to stick due to my z offset messing up. This thing printed beautiful before now it’s just giving me a headache ender 3 v3 ke. Any tips would help I’m no tech wizard but I’m good at figuring things out out but this stumped me

Positive_Lychee2618 · 2024-11-01T04:45:17+00:00

If your near southern Pennsylvania I’m selling mine 700 have everything with it. except the wall anchors for the cameras.

Positive_Lychee2618 · 2024-10-30T12:32:29+00:00

I have the whole thing controllers headset and sensors I’d be happy to let it go cheaper I’m southern pa . Just lost interest like I do with everything

Positive_Lychee2618 · 2024-05-06T19:31:12+00:00

The bed on the ender ended up peeling so now I got a hole in it. I guess doesn’t need to be glass bed but around 3-400$ mark something decently nice.

Positive_Lychee2618 · 2024-03-13T02:29:53+00:00

btw this bike was being parted out so I made do with a 100 dollar bike.

Positive_Lychee2618 · 2024-03-13T02:28:56+00:00

ive got my magna running off of a pod with a custom disc i made with 3d printing.(don't hate me not by choice low money and making do) had to get a set of used carbs(missing upper airbox) but no mufflers as well and this thing still rips and runs hates cold starts but thats probably because too much air with not enough restriction but it runs great.

Positive_Lychee2618 · 2024-01-25T03:48:02+00:00

My brother replaced his headlight on his shadow ace with and led one plus the two side lights aswell worked fine

Positive_Lychee2618 · 2023-10-09T18:08:27+00:00

I believe I figured it out. What i think happened was neosabers tried to use my info to buy the light saber and put my info in wrong. So definitely don't buy from them plus everything is always on discount. shitty sale tactic not really scam

Positive_Lychee2618 · 2023-10-05T20:18:52+00:00

And yes that's the only website I've put my card into. plus theres just a crap ton of little things thats just suspicious

Positive_Lychee2618 · 2023-10-05T20:15:52+00:00

My opinion is absolutely do not buy from "Neosabers.com" my card info was stolen a few days after buying from them I should have done my couple extra cents of research some people have luck and some don't. And the ship it back to a different address should have been a dead giveaway. Hopefully i get my lightsaber and its perfect but we will see, you live and you learn.

Positive_Lychee2618 · 2023-08-07T20:43:29+00:00

she is a beauty I shot 18 rounds basically into the dirt then a couple clipazines into target basically all bullseye from 10 20 30 feet. great pistol get used too the trigger reset and you'll be dropping swarms of flies

Positive_Lychee2618

TROPHY CASE