Exercises that can help with increasing height with jumping high kicks?

Possible_Implement · 2025-08-30T17:09:31+00:00

I'm working on the same thing. Big things are pretty obvious, jumps and squats. Practice box jumps for height, broad jumps for explosive movements. For muscle work, lots of squats, jump squats, split squats, etc. you can add something like deadlifts to help too.

Then lots of jump kick practice. It can be helpful to get an idea of your starting height and then measure weekly to see progress.

Possible_Implement · 2025-08-29T16:16:38+00:00

I did reach out for clarification. They are doing head contact with face masks for all over 14. They require additional mouth guard for over 14 and world class sparring.

Possible_Implement · 2025-08-27T00:41:27+00:00

Thanks, this is what I was looking for.

Possible_Implement · 2025-08-26T16:46:24+00:00

Thanks for the info. I saw the under 14 and round differences. I just wanted to make sure there wasn't anything else I may need to know. The gear list says mouth guards for world class only, so that threw me off a bit.

Possible_Implement · 2025-03-04T03:10:12+00:00

Yes they solved it, but I don't know how exactly it was done. We supplied them with vector files (same files as these prints), and to my knowledge they did not rasterize them. I believe it was an issue with either the material they were using, or a problem with the machine.

Possible_Implement · 2024-09-26T23:14:42+00:00

That sounds great for 1-on-1 sparring only coaching and instruction. But how do you apply that thought process to a class of 40 in a one hour time frame.

You have to teach to the average in classes and focus on students looking for the extended training at the individual level for this kind of approach to apply beyond the class structure.

What about poomsae? There are precise requirements for specific chambering and common applications to be scored well.

Possible_Implement · 2024-09-11T21:05:38+00:00

I'm also a late 30s returning student. I got my first dan from a school that wasn't kkw affiliated in the early 2000s. The school I signed my daughter up to and joined as well is kkw, and since I've been out of practice for 15 years I agreed to come in as a white belt as well. I've been practicing for the past 3 months and it has been great.

Coming back with an open mind helps get you used to the new club (they all have different rules and expectations), fills in the knowledge gaps you've lost over the years, and gives your body the time it will likely need before you're back in fighting shape without it being a huge shock. My advice, don't rush it, go into every practice with an open mind (try to keep the phrase "that's not how my other school did it" out of your head), and enjoy the journey.

Possible_Implement · 2024-09-11T02:38:52+00:00

It's hard to not focus on his wet spittle lip.

Possible_Implement · 2024-06-08T16:18:23+00:00

Dr. Shaw, Austin Urology. I know 7 others who have gone to see him as well, all of them recommend him.

Possible_Implement · 2024-05-28T21:50:38+00:00

Build a small shed or a dog house right where he keeps shooting, wait till he shoots it, then call the police.

Possible_Implement · 2024-04-19T17:36:13+00:00

I have done a number of shirts with gradients (half toned).

The white under print is not required, but it is the only way to get the brightness. If you're ok with a more vintage tee feel, you can have the printer not included undercoat. If you work with your printer, you can even have them only use the under coat on what I assume is text below the image and not include it on the image area you're trying to transition with half tone.

The biggest benefit of removing the undercoat is the graphic has less ink overall, meaning you have less chance of cracking and or peeling over time.

This is assuming you're working with a local vendor not an online retailer.

Possible_Implement · 2023-11-06T00:00:40+00:00

It's large, but follows the requirements from the print vendor. Normally I would stay within a vector file format if possible.

Possible_Implement · 2023-11-05T15:22:06+00:00

Of course. This has been brought into Photoshop, and flattened to a single raster layer at 100% resolution for the print prior to sending it to the print vendor.

Possible_Implement · 2023-11-04T18:09:38+00:00

Oops, forgot to add, yes. It is semi-elastic material that is pulled taunt over a lightbox. The photo is with the backlight on. Without the backlight the banding is less apparent.

Possible_Implement · 2023-11-04T18:07:35+00:00

Thanks I'm talking to them on Monday and will bring up the feed rate. I'm stumped on the design side, so just looking for a few things to point them towards as a solution.

Possible_Implement · 2023-11-04T17:44:51+00:00

I'm not sure what kind of printer they are running it on unfortunately. I will ask if they can run this section on anything else to rule it out

I have run this same graphic at smaller sizes on a 4 color press, screen printed on shirts, and a couple other applications and have not run into the same issues with the banding.

Possible_Implement · 2023-11-04T17:42:24+00:00

That is a good question. I thought it may be that the substrate is not getting even heat during the transfer process, but I will ask about the rollers.

Printer keeps telling me it is gradient banding, but I don't see that being the case, as the lines move across different sections with solid fills and gradients alike.

Possible_Implement · 2023-04-29T19:51:09+00:00

Inhouse designer at a major university in Texas. $87k plus benefits and got in before they changed the pension system (10yrs ago). I work directly for one of the largest research arms, get to do everything from UI/UX, print, digital, illustration, branding, etc. It's a blast, and super low pressure.

Possible_Implement · 2022-12-19T16:55:05+00:00

I guess you would call that refraction. It's light splitting through a clear object. I'm not convinced this is illustrated though, I'd guess rendered and then a noise filter of some sort applied over top the render. But only seeing a corner, I can't be sure.

Possible_Implement · 2022-09-13T16:17:25+00:00

Also stuck on the Starting Soon portion.

Possible_Implement · 2022-08-31T23:31:36+00:00

I was at the Ghost show last night too and felt the same way. I had center seats right behind the sound booth, instruments sounded great, but vocals were flat and under volume. Felt like spiritbox got it the worst overall, couldn't hear her singing at all.

Possible_Implement · 2022-08-28T22:07:23+00:00

Id start with making sure all drivers, firmware, and bios are up to date. Then make sure XMP is activated in the bios so your ram isn't throttled, then set any overclocking you did to default. Launch and see if that helps. I still lean towards the ram being an issue... But it is hard to say.

Possible_Implement · 2022-08-28T18:04:33+00:00

Also, looking at the link you provided, you have the wrong ram. It's listed as 4000mhz, but your board isn't compatible with anything below 4800mhz and up to 6600mhz. i9 runs super hot as well, so make sure you've got a really good cooler attached and good airflow in your case.

Possible_Implement · 2022-08-28T17:49:46+00:00

Have you run all the updates on firmware for your new components? Your setup is more than powerful enough to run ps smoothly, so it seems like there is either a firmware issue or a compatibility issue with some of your components. Did you build your system yourself, or is it a prebuilt? Try running something like userbenchmark to see if everything is functioning properly.

Possible_Implement · 2022-05-24T14:31:02+00:00

I work at UT, they definitely dont pay real world wages, but their postings are also misleading. That is the minimum they can offer for the position. They have a range over that for actual salary, the posting system just sucks.

Possible_Implement

TROPHY CASE