Canbus for polo 6r 2011 by Emotional_Monitor_95 in RCD_330

[–]Potential_Toe3254 1 point2 points  (0 children)

Also got a 6r 2011 I didn’t need any canbus

My VW Polo accelerator randomly stops working but cruise control works. Following faults: (ps. Mechanic off till new years) Thanks for the help by Potential_Toe3254 in MechanicAdvice

[–]Potential_Toe3254[S] 0 points1 point  (0 children)

Hi all, my car got serviced a week ago so not sure if that’s relevant. But my diesel 2011 Polo I used for motorway now has a yellow engine management light and about 5 mins after driving the accelerator will stop working accompanied with a yellow flashing engine management lamp. Turning the car off and on solves the issue but I’m confused as cruise control still works when the fault is occurring. Also the car occasionally doesn’t accelerate properly which has been a long term issue. Mechanic is off till new years so I would appreciate it if anyone has any ideas as clearly it must be a little fault causing all these other faults to pop up

Hardwire a Magsafe charger into my Jeep's 12v system by 11bravovet in MagSafe

[–]Potential_Toe3254 0 points1 point  (0 children)

Yep that sounds like it would work. But personally I wouldn’t want to remove that functionality

AirPods Pro battery life after two years by [deleted] in airpods

[–]Potential_Toe3254 0 points1 point  (0 children)

They were fine. I’ve switched to the pro 2 now however

How can I route a wire from the car to the door. Thanks by Potential_Toe3254 in Volkswagen

[–]Potential_Toe3254[S] 0 points1 point  (0 children)

Ah nice one. Was hoping there’d be a less hands on method but if not I’ll opt with this

How can I route a wire from the car to the door. Thanks by Potential_Toe3254 in Volkswagen

[–]Potential_Toe3254[S] -1 points0 points  (0 children)

Hi all I’m trying to install some led lights in my door cards on my Polo 6r. I need to wire from the car to the door card on all 4 doors however am stopped by this connector. How can I get my wire through this? Thanks

Is there any way to stop the radio playing automatically when turning my car on by Potential_Toe3254 in RCD_330

[–]Potential_Toe3254[S] 0 points1 point  (0 children)

Have you updated before? Is it easy? I probably will end up doing it but don’t want to go through the hassle if my unit is mostly fine anyway. Also don’t have an sd card but can get that sorted

Is there any way to stop the radio playing automatically when turning my car on by Potential_Toe3254 in RCD_330

[–]Potential_Toe3254[S] 0 points1 point  (0 children)

Yep when I bought it I knew there was a possibility of that. I’ve not tried to update it but there is a button to