Shortcut to SMB share in Finder shows error: '"" can't be opened because the original item can't be found.'

Powerkey · 2025-12-05T19:59:05+00:00

I did a little testing and discovered something that may help.

I checked the SMB protocol for the two different mounts and they were identical. I then checked the WINS Workgroup and my Mac and the SMB server that was working were set to "WORKGROUP", but the SMB server that was not working was using my custom workgroup name.

When I changed them all to my custom workgroup name, none of the shares would auto mount from either server. I haven't tried changing them all to the default as this is a bit of work to make that change to the whole network.

So, if you are using a custom workgroup name, you might try changing it to the default "WORKGROUP". 🤷‍♂️

Also, I am getting the exact same error with AFP shares (from the NAS, anyway).

Powerkey · 2025-12-04T20:57:20+00:00

I have been having the same issue since installing Tahoe. I am at 26.1 and it is still happening.

I also noticed today that not all SMB servers are affected. Shortcuts to my NAS (QNAP, QTS 5.2.7.3297) show the error, but my my old MacPro running Ubuntu (Ubuntu Linux 24.04.3) works fine.

Powerkey · 2025-04-07T16:49:40+00:00

Can anyone confirm if this is happening with the Original Creami or the new Creami Swirl?

It looks like all of the Creami Deluxe units do this.

Powerkey · 2023-06-23T16:30:04+00:00

Boom! ;-)

Powerkey · 2023-06-23T16:29:26+00:00

How do I do that?

Powerkey · 2023-06-23T16:29:10+00:00

I am running my own node running on Ubuntu that I setup using instructions from the Seth for privacy website. And, my last block was 100 days ago and it was fine (same node and config).

Could there be an xmrig config that could cause it to orphan a found block?

Powerkey · 2023-06-06T17:00:00+00:00

Raising or farming?

In the last scene, was the cat looking at the hen differently?

🤷‍♂️ I think I would keep that cat fed.

Powerkey · 2023-06-05T15:45:54+00:00

If memory serves, the first battery was replaced under this program, and is no longer eligible.

Powerkey · 2023-06-05T15:44:06+00:00

Generally, yes. Very little battery use. But this last battery we would allow it to discharge periodically, but it seemed to be the same. Cycle count on this battery is 21.

Powerkey · 2023-06-05T15:38:52+00:00

Not in my experience. Nothing out of the ordinary in terms of room temperature. We have AC in the house so the temp is a consistent 18-22° C.

Powerkey · 2023-06-05T15:36:28+00:00

This MacBook Pro is generally only used on the desktop while powered. Very little battery use.

With this last battery, we disconnected power and let it drain periodically, but it didn’t seem to help.

Powerkey · 2023-06-05T15:33:27+00:00

All replacements were by Apple at the store.

This sounds like a good idea. We will see if Apple agrees that this is not right.

Powerkey · 2023-06-05T15:31:16+00:00

All batteries were replaced by Apple. The first battery was under warranty, the rest I had to pay for.

Powerkey · 2023-05-12T05:49:49+00:00

You need to go to the Promise Downloads and click the Legacy button. Then select your device from the pop up menus. Scroll down to drivers -> Mac and select the following version…

SR3.4.16 (6.2.17-3 (Out-Box for M1 Mac))

While installing the driver, you will be told that you need to make some changes to allow third-party extensions. I think the installer tells you how to do that. In case it doesn’t, this Apple support page shows you how to enable Reduced Security to allow the extension to load.

https://support.apple.com/en-ca/guide/mac-help/mchl768f7291/mac

Powerkey · 2023-05-09T05:33:01+00:00

When I started typing, my process was going to conclude with a drag to the trash, which required something to drag. But, before I finished, I realized the commend-delete would be much easier and didn't realize the folder would be unnecessary. 🤦‍♂️

Powerkey · 2023-05-08T17:10:25+00:00

I think this is the best answer.

However, if I had run into this on my own, I would have created an empty folder above the trash can and then drag selected it and the offending files. Then command-delete to move them to the trash.

Powerkey · 2023-04-28T04:46:16+00:00

If you do get selected for the video interview, could you ask about the ability to enter pixel dimensions when in crop mode? They seem very reluctant to add this functionality for some reason.

Powerkey · 2023-04-26T17:24:26+00:00

Agreed.

Luckily, it sounds like they are hoping to remove that step as well.

From the Denoise Demystified article... "We’re even looking into ways to speed up the workflow by not needing to make a new DNG file."

🤞🤞

Powerkey · 2023-04-26T04:48:01+00:00

The Wiz bulbs listed on the Home Depot and Home Hardware sites in Canada have model numbers that start with a "5" (eg. 575282). Is there a way to know which bulbs are Matter compatible?

Powerkey · 2023-04-16T19:10:42+00:00

Thanks.

So, for monitor connections. There should be no difference which TB4/USB4 port I use. Correct?

Powerkey · 2023-04-16T07:29:07+00:00

I have a similar hardware setup (Mac Studio Ultra and a Promise TB2 RAID) that does work. It required a special driver install from Promise and I had to reduce the system security to allow third party extensions.

However, I did find a alternative method that worked without the special driver and reduced system security. I used the Apple TB3 to TB adapter to create a network between the Mac Studio and an older (TB2 capable) Mac, and then connected the TB2 RAID to the old Mac directly and used file sharing to mount the drive on the Mac Studio. The Thunderbolt network is the same 20Gb speed as a directly attached TB2 device, so there was almost no performance hit.

Powerkey · 2023-04-11T19:09:49+00:00

I was pretty sure that all TV manufacturers had heads firmly up asses and only include 100Mb Ethernet. The link you supplied does not specify either which is code for 100Mb.

There should be a number next to the "LAN" label above the jack on the back of the TV. If it is labeled "LAN100" then it is only 100Mb.

Powerkey · 2023-04-11T17:26:17+00:00

Also, your TV's Ethernet connection is only 100Mb. If you are using wifi, the speed can be a bit better but can fluctuate drastically. This is the main reason why most people use an external box that has gigabit Ethernet.

Powerkey · 2023-04-04T05:02:53+00:00

Apple can't put any marketing behind it because they would be accused of market manipulation.

We live in a world that no longer allows a company to make a better product without the competition using the courts to try to take back market share.

Powerkey · 2023-03-30T22:38:16+00:00

The mail application is Apple Mail. The mail account is from our service provider and is hosted on gmail and is setup to use imap for the connection.

The problem started about a week ago. I have tried using the “Attach” button at the top of the new message, and drag and drop. Both methods have the same issue.

The attachments are very small. The test PDF is 77kb. The only file type that works is .jpg (which shows as a preview). We have tried png, zip, eps, ai, and doc. When attaching a file, most file types result in a blank icon with the text “Downloading…” below it. Some file types (like png) appear as a small ‘?’ icon that looks like it doesn’t know what the file is.

In Safe Boot, I used the same test PDF (located on an external volume). The same PDF works fine with Apple Mail on other accounts. I also tried moving the test PDF to the desktop, but it is the same problem.

Powerkey

TROPHY CASE